public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 42/53] clk: sunxi: Implement UART resets
Date: Fri, 10 Aug 2018 11:37:00 +0530	[thread overview]
Message-ID: <20180810060711.6547-43-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180810060711.6547-1-jagan@amarulasolutions.com>

Implement UART resets for all relevant Allwinner SoC
clock drivers via reset map descriptor table.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/clk/sunxi/clk_a23.c  | 6 ++++++
 drivers/clk/sunxi/clk_a31.c  | 7 +++++++
 drivers/clk/sunxi/clk_a64.c  | 6 ++++++
 drivers/clk/sunxi/clk_a83t.c | 6 ++++++
 drivers/clk/sunxi/clk_h3.c   | 5 +++++
 drivers/clk/sunxi/clk_r40.c  | 9 +++++++++
 drivers/clk/sunxi/clk_v3s.c  | 4 ++++
 7 files changed, 43 insertions(+)

diff --git a/drivers/clk/sunxi/clk_a23.c b/drivers/clk/sunxi/clk_a23.c
index 331c79af81..268148002b 100644
--- a/drivers/clk/sunxi/clk_a23.c
+++ b/drivers/clk/sunxi/clk_a23.c
@@ -50,6 +50,12 @@ static struct ccu_reset_map a23_resets[] = {
 	[RST_BUS_OTG]		= { 0x2c0, BIT(24) },
 	[RST_BUS_EHCI]		= { 0x2c0, BIT(26) },
 	[RST_BUS_OHCI]		= { 0x2c0, BIT(29) },
+
+	[RST_BUS_UART0]		= { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		= { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		= { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		= { 0x2d8, BIT(19) },
+	[RST_BUS_UART4]		= { 0x2d8, BIT(20) },
 };
 
 static const struct ccu_desc sun8i_a23_ccu_desc = {
diff --git a/drivers/clk/sunxi/clk_a31.c b/drivers/clk/sunxi/clk_a31.c
index 40803a1d64..288979a18f 100644
--- a/drivers/clk/sunxi/clk_a31.c
+++ b/drivers/clk/sunxi/clk_a31.c
@@ -72,6 +72,13 @@ static struct ccu_reset_map a31_resets[] = {
 	[RST_AHB1_OHCI0]	= { 0x2c0, BIT(29) },
 	[RST_AHB1_OHCI1]	= { 0x2c0, BIT(30) },
 	[RST_AHB1_OHCI2]	= { 0x2c0, BIT(31) },
+
+	[RST_APB2_UART0]	= { 0x2d8, BIT(16) },
+	[RST_APB2_UART1]	= { 0x2d8, BIT(17) },
+	[RST_APB2_UART2]	= { 0x2d8, BIT(18) },
+	[RST_APB2_UART3]	= { 0x2d8, BIT(19) },
+	[RST_APB2_UART4]	= { 0x2d8, BIT(20) },
+	[RST_APB2_UART5]	= { 0x2d8, BIT(21) },
 };
 
 static const struct ccu_desc sun6i_a31_ccu_desc = {
diff --git a/drivers/clk/sunxi/clk_a64.c b/drivers/clk/sunxi/clk_a64.c
index 13b506f983..344cfb59aa 100644
--- a/drivers/clk/sunxi/clk_a64.c
+++ b/drivers/clk/sunxi/clk_a64.c
@@ -60,6 +60,12 @@ static struct ccu_reset_map a64_resets[] = {
 	[RST_BUS_EHCI1]		= { 0x2c0, BIT(25) },
 	[RST_BUS_OHCI0]		= { 0x2c0, BIT(28) },
 	[RST_BUS_OHCI1]		= { 0x2c0, BIT(29) },
+
+	[RST_BUS_UART0]		= { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		= { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		= { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		= { 0x2d8, BIT(19) },
+	[RST_BUS_UART4]		= { 0x2d8, BIT(20) },
 };
 
 static const struct ccu_desc sun50i_a64_ccu_desc = {
diff --git a/drivers/clk/sunxi/clk_a83t.c b/drivers/clk/sunxi/clk_a83t.c
index 5c1235fa7b..cf9455da97 100644
--- a/drivers/clk/sunxi/clk_a83t.c
+++ b/drivers/clk/sunxi/clk_a83t.c
@@ -50,6 +50,12 @@ static struct ccu_reset_map a83t_resets[] = {
 	[RST_BUS_EHCI0]		= { 0x2c0, BIT(26) },
 	[RST_BUS_EHCI1]		= { 0x2c0, BIT(27) },
 	[RST_BUS_OHCI0]		= { 0x2c0, BIT(29) },
+
+	[RST_BUS_UART0]		= { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		= { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		= { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		= { 0x2d8, BIT(19) },
+	[RST_BUS_UART4]		= { 0x2d8, BIT(20) },
 };
 
 static const struct ccu_desc sun8i_a83t_ccu_desc = {
diff --git a/drivers/clk/sunxi/clk_h3.c b/drivers/clk/sunxi/clk_h3.c
index b132ae0a0d..15d933a6c5 100644
--- a/drivers/clk/sunxi/clk_h3.c
+++ b/drivers/clk/sunxi/clk_h3.c
@@ -70,6 +70,11 @@ static struct ccu_reset_map h3_resets[] = {
 	[RST_BUS_OHCI1]		= { 0x2c0, BIT(29) },
 	[RST_BUS_OHCI2]		= { 0x2c0, BIT(30) },
 	[RST_BUS_OHCI3]		= { 0x2c0, BIT(31) },
+
+	[RST_BUS_UART0]		= { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		= { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		= { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		= { 0x2d8, BIT(19) },
 };
 
 static const struct ccu_desc sun8i_h3_ccu_desc = {
diff --git a/drivers/clk/sunxi/clk_r40.c b/drivers/clk/sunxi/clk_r40.c
index 1e5b1d10f7..ee699d26ee 100644
--- a/drivers/clk/sunxi/clk_r40.c
+++ b/drivers/clk/sunxi/clk_r40.c
@@ -63,6 +63,15 @@ static struct ccu_reset_map r40_resets[] = {
 	[RST_BUS_OHCI0]		= { 0x2c0, BIT(29) },
 	[RST_BUS_OHCI1]		= { 0x2c0, BIT(30) },
 	[RST_BUS_OHCI2]		= { 0x2c0, BIT(31) },
+
+	[RST_BUS_UART0]		= { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		= { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		= { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		= { 0x2d8, BIT(19) },
+	[RST_BUS_UART4]		= { 0x2d8, BIT(20) },
+	[RST_BUS_UART5]		= { 0x2d8, BIT(21) },
+	[RST_BUS_UART6]		= { 0x2d8, BIT(22) },
+	[RST_BUS_UART7]		= { 0x2d8, BIT(23) },
 };
 
 static const struct ccu_desc sun8i_r40_ccu_desc = {
diff --git a/drivers/clk/sunxi/clk_v3s.c b/drivers/clk/sunxi/clk_v3s.c
index c6e57147ee..87ca0350d8 100644
--- a/drivers/clk/sunxi/clk_v3s.c
+++ b/drivers/clk/sunxi/clk_v3s.c
@@ -40,6 +40,10 @@ static struct ccu_reset_map v3s_resets[] = {
 	[RST_BUS_MMC2]		= { 0x2c0, BIT(10) },
 	[RST_BUS_SPI0]		= { 0x2c0, BIT(20) },
 	[RST_BUS_OTG]		= { 0x2c0, BIT(24) },
+
+	[RST_BUS_UART0]		= { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		= { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		= { 0x2d8, BIT(18) },
 };
 
 static const struct ccu_desc sun8i_v3s_ccu_desc = {
-- 
2.18.0.321.gffc6fa0e3

  parent reply	other threads:[~2018-08-10  6:07 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-10  6:06 [U-Boot] [PATCH v2 00/53] clk: Add Allwinner CLK, RESET support Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 01/53] clk: Kconfig: Ascending order to sub directiory kconfigs Jagan Teki
2018-08-13 10:34   ` Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 02/53] clk: Add Allwinner A64 CLK driver Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 03/53] reset: Add default request ops Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 04/53] reset: Add Allwinner RESET driver Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 05/53] clk: sunxi: Add Allwinner H3/H5 CLK driver Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 06/53] clk: sunxi: Add Allwinner A10/A20 " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 07/53] clk: sunxi: Add Allwinner A10s/A13 " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 08/53] clk: sunxi: Add Allwinner A31 " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 09/53] clk: sunxi: Add Allwinner A23 " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 10/53] clk: sunxi: a23: Add CLK support for A33 Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 11/53] clk: sunxi: Add Allwinner A83T CLK driver Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 12/53] clk: sunxi: Add Allwinner R40 " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 13/53] clk: sunxi: Add Allwinner V3S " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 14/53] sunxi: Enable CLK Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 15/53] musb-new: sunxi: Use CLK and RESET support Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 16/53] phy: sun4i-usb: " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 17/53] sunxi: usb: Switch to Generic host controllers Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 18/53] usb: host: Drop [e-o]hci-sunxi drivers Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 19/53] clk: sunxi: Implement AHB bus MMC clocks Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 20/53] clk: sunxi: Implement direct " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 21/53] clk: sunxi: Implement AHB bus MMC resets Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 22/53] reset: Add get reset by name optionally Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 23/53] reset: Add reset valid Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 24/53] dm: mmc: sunxi: Add CLK and RESET support Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 25/53] fastboot: sunxi: Update fastboot mmc default device Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 26/53] env: sunxi: Update default env fat device Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 27/53] sunxi: Use mmc_bootdev=2 for MMC2 boot Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 28/53] sunxi: A20: Enable DM_MMC Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 29/53] mmc: sunxi: Add mmc, emmc H5/A64 compatible Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 30/53] sunxi: H3_H5: Enable DM_MMC Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 31/53] sunxi: A64: " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 32/53] mmc: sunxi: Add A83T emmc compatible Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 33/53] sunxi: A83T: Enable DM_MMC Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 34/53] sunxi: V40: " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 35/53] sunxi: A13/A31: " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 36/53] sunxi: A23/A33/V3S: " Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 37/53] clk: sunxi: Implement SPI clocks Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 38/53] clk: sunxi: Implement SPI resets Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 39/53] spi: sun4i: Add CLK support Jagan Teki
2018-08-10  6:06 ` [U-Boot] [PATCH v2 40/53] spi: Add Allwinner A31 SPI driver Jagan Teki
2018-08-11  0:38   ` Fahad Sadah
2018-08-10  6:06 ` [U-Boot] [PATCH v2 41/53] clk: sunxi: Implement UART clocks Jagan Teki
2018-08-10  6:07 ` Jagan Teki [this message]
2018-08-10  6:07 ` [U-Boot] [PATCH v2 43/53] clk: sunxi: Implement Ethernet clocks Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 44/53] clk: sunxi: Implement Ethernet resets Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 45/53] net: sunxi_emac: Add CLK support Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 46/53] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 47/53] net: sun8i_emac: Add CLK and RESET support Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 48/53] clk: Get the CLK by index without device Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 49/53] clk: Use clk_get_by_index_tail() Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 50/53] reset: Get the RESET by index without device Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 51/53] clk: sunxi: h3: Implement EPHY CLK and RESET Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 52/53] net: sun8i_emac: Add EPHY CLK and RESET support Jagan Teki
2018-08-10  6:07 ` [U-Boot] [PATCH v2 53/53] board: sunxi: gmac: Remove Ethernet clock and reset Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180810060711.6547-43-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox