From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 05/53] clk: sunxi: Add Allwinner H3/H5 CLK driver
Date: Fri, 10 Aug 2018 11:36:23 +0530 [thread overview]
Message-ID: <20180810060711.6547-6-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180810060711.6547-1-jagan@amarulasolutions.com>
Add initial clock driver for Allwinner H3/H5.
- Implement USB bus and USB clocks via ccu_clk_map descriptor
for H3/H5, so it can accessed in common clk enable and disable
functions from clk_sunxi.c
- Implement USB bus and USB resets via ccu_reset_map descriptor
for H3/H5, so it can accessed in common reset deassert and assert
functions from reset-sunxi.c
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/clk/sunxi/Kconfig | 7 +++
drivers/clk/sunxi/Makefile | 1 +
drivers/clk/sunxi/clk_h3.c | 97 ++++++++++++++++++++++++++++++++++++++
3 files changed, 105 insertions(+)
create mode 100644 drivers/clk/sunxi/clk_h3.c
diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
index 041d711e58..c3713bbac2 100644
--- a/drivers/clk/sunxi/Kconfig
+++ b/drivers/clk/sunxi/Kconfig
@@ -9,6 +9,13 @@ config CLK_SUNXI
if CLK_SUNXI
+config CLK_SUN8I_H3
+ bool "Clock driver for Allwinner H3/H5"
+ default MACH_SUNXI_H3_H5
+ help
+ This enables common clock driver support for platforms based
+ on Allwinner H3/H5 SoC.
+
config CLK_SUN50I_A64
bool "Clock driver for Allwinner A64"
default MACH_SUN50I
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index fb20d28333..dec49f27a1 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -6,4 +6,5 @@
obj-$(CONFIG_CLK_SUNXI) += clk_sunxi.o
+obj-$(CONFIG_CLK_SUN8I_H3) += clk_h3.o
obj-$(CONFIG_CLK_SUN50I_A64) += clk_a64.o
diff --git a/drivers/clk/sunxi/clk_h3.c b/drivers/clk/sunxi/clk_h3.c
new file mode 100644
index 0000000000..0b7f4947dd
--- /dev/null
+++ b/drivers/clk/sunxi/clk_h3.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/arch/ccu.h>
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+static struct ccu_clk_map h3_clks[] = {
+ [CLK_BUS_OTG] = { 0x060, BIT(23), NULL },
+ [CLK_BUS_EHCI0] = { 0x060, BIT(24), NULL },
+ [CLK_BUS_EHCI1] = { 0x060, BIT(25), NULL },
+ [CLK_BUS_EHCI2] = { 0x060, BIT(26), NULL },
+ [CLK_BUS_EHCI3] = { 0x060, BIT(27), NULL },
+ [CLK_BUS_OHCI0] = { 0x060, BIT(28), NULL },
+ [CLK_BUS_OHCI1] = { 0x060, BIT(29), NULL },
+ [CLK_BUS_OHCI2] = { 0x060, BIT(30), NULL },
+ [CLK_BUS_OHCI3] = { 0x060, BIT(31), NULL },
+
+ [CLK_USB_PHY0] = { 0x0cc, BIT(8), NULL },
+ [CLK_USB_PHY1] = { 0x0cc, BIT(9), NULL },
+ [CLK_USB_PHY2] = { 0x0cc, BIT(10), NULL },
+ [CLK_USB_PHY3] = { 0x0cc, BIT(11), NULL },
+ [CLK_USB_OHCI0] = { 0x0cc, BIT(16), NULL },
+ [CLK_USB_OHCI1] = { 0x0cc, BIT(17), NULL },
+ [CLK_USB_OHCI2] = { 0x0cc, BIT(18), NULL },
+ [CLK_USB_OHCI3] = { 0x0cc, BIT(19), NULL },
+};
+
+static struct ccu_reset_map h3_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_USB_PHY3] = { 0x0cc, BIT(3) },
+
+ [RST_BUS_OTG] = { 0x2c0, BIT(23) },
+ [RST_BUS_EHCI0] = { 0x2c0, BIT(24) },
+ [RST_BUS_EHCI1] = { 0x2c0, BIT(25) },
+ [RST_BUS_EHCI2] = { 0x2c0, BIT(26) },
+ [RST_BUS_EHCI3] = { 0x2c0, BIT(27) },
+ [RST_BUS_OHCI0] = { 0x2c0, BIT(28) },
+ [RST_BUS_OHCI1] = { 0x2c0, BIT(29) },
+ [RST_BUS_OHCI2] = { 0x2c0, BIT(30) },
+ [RST_BUS_OHCI3] = { 0x2c0, BIT(31) },
+};
+
+static const struct ccu_desc sun8i_h3_ccu_desc = {
+ .clks = h3_clks,
+ .num_clks = ARRAY_SIZE(h3_clks),
+
+ .resets = h3_resets,
+ .num_resets = ARRAY_SIZE(h3_resets),
+};
+
+static int h3_clk_probe(struct udevice *dev)
+{
+ struct sunxi_clk_priv *priv = dev_get_priv(dev);
+
+ priv->base = dev_read_addr_ptr(dev);
+ if (!priv->base)
+ return -ENOMEM;
+
+ priv->desc = (const struct ccu_desc *)dev_get_driver_data(dev);
+ if (!priv->desc)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int h3_clk_bind(struct udevice *dev)
+{
+ return sunxi_reset_bind(dev, 53);
+}
+
+static const struct udevice_id h3_clk_ids[] = {
+ { .compatible = "allwinner,sun8i-h3-ccu",
+ .data = (ulong)&sun8i_h3_ccu_desc },
+ { .compatible = "allwinner,sun50i-h5-ccu",
+ .data = (ulong)&sun8i_h3_ccu_desc },
+ { }
+};
+
+U_BOOT_DRIVER(clk_sun8i_h3) = {
+ .name = "sun8i_h3_ccu",
+ .id = UCLASS_CLK,
+ .of_match = h3_clk_ids,
+ .priv_auto_alloc_size = sizeof(struct sunxi_clk_priv),
+ .ops = &sunxi_clk_ops,
+ .probe = h3_clk_probe,
+ .bind = h3_clk_bind,
+};
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2018-08-10 6:06 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-10 6:06 [U-Boot] [PATCH v2 00/53] clk: Add Allwinner CLK, RESET support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 01/53] clk: Kconfig: Ascending order to sub directiory kconfigs Jagan Teki
2018-08-13 10:34 ` Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 02/53] clk: Add Allwinner A64 CLK driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 03/53] reset: Add default request ops Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 04/53] reset: Add Allwinner RESET driver Jagan Teki
2018-08-10 6:06 ` Jagan Teki [this message]
2018-08-10 6:06 ` [U-Boot] [PATCH v2 06/53] clk: sunxi: Add Allwinner A10/A20 CLK driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 07/53] clk: sunxi: Add Allwinner A10s/A13 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 08/53] clk: sunxi: Add Allwinner A31 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 09/53] clk: sunxi: Add Allwinner A23 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 10/53] clk: sunxi: a23: Add CLK support for A33 Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 11/53] clk: sunxi: Add Allwinner A83T CLK driver Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 12/53] clk: sunxi: Add Allwinner R40 " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 13/53] clk: sunxi: Add Allwinner V3S " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 14/53] sunxi: Enable CLK Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 15/53] musb-new: sunxi: Use CLK and RESET support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 16/53] phy: sun4i-usb: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 17/53] sunxi: usb: Switch to Generic host controllers Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 18/53] usb: host: Drop [e-o]hci-sunxi drivers Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 19/53] clk: sunxi: Implement AHB bus MMC clocks Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 20/53] clk: sunxi: Implement direct " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 21/53] clk: sunxi: Implement AHB bus MMC resets Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 22/53] reset: Add get reset by name optionally Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 23/53] reset: Add reset valid Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 24/53] dm: mmc: sunxi: Add CLK and RESET support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 25/53] fastboot: sunxi: Update fastboot mmc default device Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 26/53] env: sunxi: Update default env fat device Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 27/53] sunxi: Use mmc_bootdev=2 for MMC2 boot Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 28/53] sunxi: A20: Enable DM_MMC Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 29/53] mmc: sunxi: Add mmc, emmc H5/A64 compatible Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 30/53] sunxi: H3_H5: Enable DM_MMC Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 31/53] sunxi: A64: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 32/53] mmc: sunxi: Add A83T emmc compatible Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 33/53] sunxi: A83T: Enable DM_MMC Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 34/53] sunxi: V40: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 35/53] sunxi: A13/A31: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 36/53] sunxi: A23/A33/V3S: " Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 37/53] clk: sunxi: Implement SPI clocks Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 38/53] clk: sunxi: Implement SPI resets Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 39/53] spi: sun4i: Add CLK support Jagan Teki
2018-08-10 6:06 ` [U-Boot] [PATCH v2 40/53] spi: Add Allwinner A31 SPI driver Jagan Teki
2018-08-11 0:38 ` Fahad Sadah
2018-08-10 6:06 ` [U-Boot] [PATCH v2 41/53] clk: sunxi: Implement UART clocks Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 42/53] clk: sunxi: Implement UART resets Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 43/53] clk: sunxi: Implement Ethernet clocks Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 44/53] clk: sunxi: Implement Ethernet resets Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 45/53] net: sunxi_emac: Add CLK support Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 46/53] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 47/53] net: sun8i_emac: Add CLK and RESET support Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 48/53] clk: Get the CLK by index without device Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 49/53] clk: Use clk_get_by_index_tail() Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 50/53] reset: Get the RESET by index without device Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 51/53] clk: sunxi: h3: Implement EPHY CLK and RESET Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 52/53] net: sun8i_emac: Add EPHY CLK and RESET support Jagan Teki
2018-08-10 6:07 ` [U-Boot] [PATCH v2 53/53] board: sunxi: gmac: Remove Ethernet clock and reset Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180810060711.6547-6-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox