[U-Boot] BUG num banks 8 exceeds hardcoded limit 4

[Lukasz Majewski <lukma@denx.de>]

Hi Anand,

> Hi Lukasz / Minkyu,
> 
> Today I wanted to test the latest u-boot on my Odroid-XU4
> and I landed onto this bug and it failed to boot up.
> 
> include/configs/odroid.h:#define CONFIG_NR_DRAM_BANKS   8
> include/configs/odroid_xu3.h:#define CONFIG_NR_DRAM_BANKS       8
> 
> seem to the the issue.


Are you sure that you ran the code recently?

According to git blame:
973ae1e0858d3 (Przemyslaw Marczak 2015-02-17 14:50:26 +0100  22)
#define CONFIG_NR_DRAM_BANKS   8

This change is quite old...

Which u-boot version have you ran till now?

> 
> Well I have some local changes to enable MMC on u-boot and reset the
> mmc regulators on.
> which might not be related to this bug.
> 
> U-Boot 2018.09-rc1-00165-ge966471562-dirty (Aug 09 2018 - 06:29:02
> +0000) for ODROID-XU3/XU4/HC1
> 
> CPU:   Exynos5422 @ 800 MHz
> Model: Odroid XU3 based on EXYNOS5422
> Board: Odroid XU3 based on EXYNOS5422
> Type:  xu4
> DRAM:  2 GiB
> LDO18 at vdd_emmc_1V8: set 1800000 uV; enabling
> LDO3 at vddq_mmc0: set 1800000 uV; enabling
> LDO13 at vddq_mmc2: set 2800000 uV; enabling
> LDO19 at vdd_sd: set 2800000 uV; enabling
> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
> Loading Environment from MMC... Card did not respond to voltage
> select! *** Warning - No block device, using default environment
> 
> Failed (-5)
> In:    serial
> Out:   serial
> Err:   serial
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> MMC Device 1 not found
> no mmc device at slot 1
> Card did not respond to voltage select!
> switch to partitions #0, OK
> mmc2 is current device
> Scanning mmc 2:1...
> Found U-Boot script /boot.scr
> 3266 bytes read in 6 ms (531.3 KiB/s)
> ## Executing script at 50000000
> Found kernel image: zImage
> 57082 bytes read in 8 ms (6.8 MiB/s)
> Found ramdisk image.
> 6484525 bytes read in 425 ms (14.6 MiB/s)
> 6713264 bytes read in 441 ms (14.5 MiB/s)
> Kernel image @ 0x40007fc0 [ 0x000000 - 0x666fb0 ]
> ## Loading init Ramdisk from Legacy Image at 42000000 ...
>    Image Name:   uInitrd
>    Image Type:   ARM Linux RAMDisk Image (uncompressed)
>    Data Size:    6484461 Bytes = 6.2 MiB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
> ## Flattened Device Tree blob at 40800000
>    Booting using the fdt blob at 0x40800000
>    Loading Ramdisk to 4f9d0000, end 4ffff1ed ... OK
>    Loading Device Tree to 4f9bf000, end 4f9cfef9 ... OK
> fdt_fixup_memory_banks: num banks 8 exceeds hardcoded limit 4.
> Recompile with higher MEMORY_BANKS_MAX?
> ERROR: arch-specific fdt fixup failed
>  - must RESET the board to recover.
> 
> FDT creation failed! hanging...### ERROR ### Please RESET the board
> ###
> 
> Best Regards
> -Anand




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180811/aaa10799/attachment.sig>