public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@bootlin.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 04/31] mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing
Date: Thu, 16 Aug 2018 17:36:10 +0200	[thread overview]
Message-ID: <20180816173610.54d032be@bbrezillon> (raw)
In-Reply-To: <20180816153029.15521-5-miquel.raynal@bootlin.com>

On Thu, 16 Aug 2018 17:30:02 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Some MTD sublayers/drivers are implementing ->_read/write() and
> not ->_read/write_oob().
> 
> While for NAND devices both are usually valid, for NOR devices, using
> the _oob variant has no real meaning. But, as the MTD layer is supposed
> to hide as much as possible the flash complexity to the user, there is
> no reason to error out while it is just a matter of rewritting things
> internally.
> 
> Add a fallback on mtd->_read() (resp. mtd->_write()) when the user calls
> mtd_read_oob() (resp. mtd_write_oob()) while mtd->_read_oob() (resp.
> mtd->_write_oob) is not implemented. There is already a fallback on the
> _oob variant if the former is used.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

> ---
>  drivers/mtd/mtdcore.c | 26 ++++++++++++++++++++------
>  1 file changed, 20 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
> index 9a3efe95df..fb1d68d5e2 100644
> --- a/drivers/mtd/mtdcore.c
> +++ b/drivers/mtd/mtdcore.c
> @@ -1047,20 +1047,27 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
>  {
>  	int ret_code;
>  	ops->retlen = ops->oobretlen = 0;
> -	if (!mtd->_read_oob)
> -		return -EOPNOTSUPP;
>  
>  	ret_code = mtd_check_oob_ops(mtd, from, ops);
>  	if (ret_code)
>  		return ret_code;
>  
> +	/* Check the validity of a potential fallback on mtd->_read */
> +	if (!mtd->_read_oob && (!mtd->_read || ops->oobbuf))
> +		return -EOPNOTSUPP;
> +
> +	if (mtd->_read_oob)
> +		ret_code = mtd->_read_oob(mtd, from, ops);
> +	else
> +		ret_code = mtd->_read(mtd, from, ops->len, &ops->retlen,
> +				      ops->datbuf);
> +
>  	/*
>  	 * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics
>  	 * similar to mtd->_read(), returning a non-negative integer
>  	 * representing max bitflips. In other cases, mtd->_read_oob() may
>  	 * return -EUCLEAN. In all cases, perform similar logic to mtd_read().
>  	 */
> -	ret_code = mtd->_read_oob(mtd, from, ops);
>  	if (unlikely(ret_code < 0))
>  		return ret_code;
>  	if (mtd->ecc_strength == 0)
> @@ -1075,8 +1082,7 @@ int mtd_write_oob(struct mtd_info *mtd, loff_t to,
>  	int ret;
>  
>  	ops->retlen = ops->oobretlen = 0;
> -	if (!mtd->_write_oob)
> -		return -EOPNOTSUPP;
> +
>  	if (!(mtd->flags & MTD_WRITEABLE))
>  		return -EROFS;
>  
> @@ -1084,7 +1090,15 @@ int mtd_write_oob(struct mtd_info *mtd, loff_t to,
>  	if (ret)
>  		return ret;
>  
> -	return mtd->_write_oob(mtd, to, ops);
> +	/* Check the validity of a potential fallback on mtd->_write */
> +	if (!mtd->_write_oob && (!mtd->_write || ops->oobbuf))
> +		return -EOPNOTSUPP;
> +
> +	if (mtd->_write_oob)
> +		return mtd->_write_oob(mtd, to, ops);
> +	else
> +		return mtd->_write(mtd, to, ops->len, &ops->retlen,
> +				   ops->datbuf);
>  }
>  EXPORT_SYMBOL_GPL(mtd_write_oob);
>  

  reply	other threads:[~2018-08-16 15:36 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-16 15:29 [U-Boot] [PATCH v6 00/31] SPI-NAND support Miquel Raynal
2018-08-16 15:29 ` [U-Boot] [PATCH v6 01/31] mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 02/31] mtd: Uninline mtd_write_oob and move it to mtdcore.c Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 03/31] mtd: Add sanity checks in mtd_write/read_oob() Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 04/31] mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing Miquel Raynal
2018-08-16 15:36   ` Boris Brezillon [this message]
2018-08-16 15:30 ` [U-Boot] [PATCH v6 05/31] mtd: add get/set of_node/flash_node helpers Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 06/31] mtd: fix build issue with includes Miquel Raynal
2018-08-16 15:33   ` Boris Brezillon
2018-08-16 15:55     ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 07/31] mtd: move definitions to enlarge their range Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 08/31] mtd: move all flash categories inside MTD submenu Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 09/31] mtd: move NAND files into a raw/ subdirectory Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 10/31] mtd: rename nand into rawnand in Kconfig prompt Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 11/31] mtd: nand: Add core infrastructure to deal with NAND devices Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 12/31] mtd: nand: Pass mode information to nand_page_io_req Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 13/31] spi: Extend the core to ease integration of SPI memory controllers Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 14/31] mtd: nand: Add core infrastructure to support SPI NANDs Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 15/31] mtd: spinand: Add initial support for Micron MT29F2G01ABAGD Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 16/31] mtd: spinand: Add initial support for Winbond W25M02GV Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 17/31] mtd: spinand: Add initial support for the MX35LF1GE4AB chip Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 18/31] mtd: spinand: Add initial support for the MX35LF2GE4AB chip Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 19/31] dt-bindings: Add bindings for SPI NAND devices Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 20/31] mtd: declare MTD_PARTITIONS symbol in Kconfig Miquel Raynal
2018-08-16 15:46   ` Boris Brezillon
2018-09-03  7:47   ` Jagan Teki
2018-09-03  8:30     ` Miquel Raynal
2018-09-03  8:50     ` Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 21/31] mtd: mtdpart: balance debug messages Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 22/31] cmd: ubi: delete useless and misleading definitions Miquel Raynal
2018-08-16 15:50   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 23/31] cmd: mtdparts: add fallthrough in switch statement Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 24/31] cmd: mtdparts: accept spi-nand devices Miquel Raynal
2018-08-16 15:53   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 25/31] cmd: mtdparts: add a generic 'mtdparts' parser Miquel Raynal
2018-08-16 17:04   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 26/31] mtd: uclass: add probe function Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 27/31] mtd: move mtdparts_init() declaration Miquel Raynal
2018-08-16 16:05   ` Boris Brezillon
2018-08-20  9:06     ` Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 28/31] mtd: mtdpart: implement proper partition handling Miquel Raynal
2018-08-16 16:19   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 29/31] cmd: mtd: add 'mtd' command Miquel Raynal
2018-08-16 16:22   ` Boris Brezillon
2018-08-20 16:08     ` Miquel Raynal
2018-08-20 16:30       ` Boris Brezillon
2018-08-16 19:50   ` Boris Brezillon
2018-08-16 20:38   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 30/31] cmd: mtdparts: try to probe the MTD devices as a fallback Miquel Raynal
2018-08-16 17:11   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 31/31] cmd: ubi: clean the partition handling Miquel Raynal
2018-08-16 19:17   ` Boris Brezillon
2018-08-16 16:58 ` [U-Boot] [PATCH v6 00/31] SPI-NAND support Boris Brezillon
2018-08-17  8:38   ` Miquel Raynal
2018-08-30 12:43     ` Miquel Raynal
2018-09-02 18:17       ` Jagan Teki
2018-09-03  6:45         ` Miquel Raynal
2018-09-03  7:45           ` Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180816173610.54d032be@bbrezillon \
    --to=boris.brezillon@bootlin.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox