public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@bootlin.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 25/31] cmd: mtdparts: add a generic 'mtdparts' parser
Date: Thu, 16 Aug 2018 19:04:43 +0200	[thread overview]
Message-ID: <20180816190443.0489938c@bbrezillon> (raw)
In-Reply-To: <20180816153029.15521-26-miquel.raynal@bootlin.com>

On Thu, 16 Aug 2018 17:30:23 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

>  
> +int mtdparts_parse_part(struct mtd_info *parent, const char **_mtdparts,
> +			struct mtd_partition **_parts, int *_nb_parts)
> +{
> +	const char *mtdparts = *_mtdparts;
> +	struct part_info *part_legacy;
> +	struct mtd_partition *parts;
> +	int cur_off = 0, cur_sz = 0;
> +	int nb_parts = 0;
> +	char *names;
> +	int ret, idx;
> +
> +	*_parts = NULL;
> +	*_nb_parts = 0;
> +
> +	/* First, iterate over the partitions until we know their number */
> +	while (mtdparts[0] != '\0' && mtdparts[0] != ';') {
> +		ret = part_parse(mtdparts, &mtdparts, &part_legacy);
> +		if (ret)
> +			return ret;
> +
> +		nb_parts++;
> +		free(part_legacy);
> +	}
> +
> +	/* Allocate an array of partitions to give back to the caller */
> +	parts = malloc((sizeof(*parts) + 20) * nb_parts);
> +	names = (char *)&parts[nb_parts];
> +	if (!parts) {
> +		printf("Could not allocate enough space to save partitions meta-data\n");
> +		return -ENOMEM;
> +	}
> +
> +	/* Iterate again over each partition to save the data in our array */
> +	for (idx = 0; idx < nb_parts; idx++) {
> +		char *name;
> +
> +		ret = part_parse(*_mtdparts, _mtdparts, &part_legacy);
> +		if (ret)
> +			return ret;
> +
> +		name = &names[idx * 20];
> +		strncpy(name, part_legacy->name, 20);
> +		parts[idx].name = name;
> +
> +		parts[idx].size = part_legacy->size;
> +		if (parts[idx].size == SIZE_REMAINING)
> +			parts[idx].size = parent->size - cur_sz;
> +		cur_sz += parts[idx].size;
> +
> +		parts[idx].offset = part_legacy->offset;
> +		if (parts[idx].offset == OFFSET_NOT_SPECIFIED)
> +			parts[idx].offset = cur_off;
> +		cur_off += parts[idx].size;
> +
> +		parts[idx].mask_flags = part_legacy->mask_flags;
> +		parts[idx].ecclayout = parent->ecclayout;
> +
> +		free(part_legacy);
> +	}
> +
> +	/* Offset by one mtdparts to point to the next device if needed */
> +	if (*_mtdparts[0] == ';')
> +		_mtdparts++;
> +
> +	*_parts = parts;
> +	*_nb_parts = nb_parts;
> +
> +	return 0;
> +}
>

I guess the CMD_MTD dependency on CMD_MTDPARTS comes from here. Can't
we just move mtdparts_parse_part()+part_parse() somewhere in
drivers/mtd/ and remove this dependency?

  reply	other threads:[~2018-08-16 17:04 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-16 15:29 [U-Boot] [PATCH v6 00/31] SPI-NAND support Miquel Raynal
2018-08-16 15:29 ` [U-Boot] [PATCH v6 01/31] mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 02/31] mtd: Uninline mtd_write_oob and move it to mtdcore.c Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 03/31] mtd: Add sanity checks in mtd_write/read_oob() Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 04/31] mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing Miquel Raynal
2018-08-16 15:36   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 05/31] mtd: add get/set of_node/flash_node helpers Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 06/31] mtd: fix build issue with includes Miquel Raynal
2018-08-16 15:33   ` Boris Brezillon
2018-08-16 15:55     ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 07/31] mtd: move definitions to enlarge their range Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 08/31] mtd: move all flash categories inside MTD submenu Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 09/31] mtd: move NAND files into a raw/ subdirectory Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 10/31] mtd: rename nand into rawnand in Kconfig prompt Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 11/31] mtd: nand: Add core infrastructure to deal with NAND devices Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 12/31] mtd: nand: Pass mode information to nand_page_io_req Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 13/31] spi: Extend the core to ease integration of SPI memory controllers Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 14/31] mtd: nand: Add core infrastructure to support SPI NANDs Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 15/31] mtd: spinand: Add initial support for Micron MT29F2G01ABAGD Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 16/31] mtd: spinand: Add initial support for Winbond W25M02GV Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 17/31] mtd: spinand: Add initial support for the MX35LF1GE4AB chip Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 18/31] mtd: spinand: Add initial support for the MX35LF2GE4AB chip Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 19/31] dt-bindings: Add bindings for SPI NAND devices Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 20/31] mtd: declare MTD_PARTITIONS symbol in Kconfig Miquel Raynal
2018-08-16 15:46   ` Boris Brezillon
2018-09-03  7:47   ` Jagan Teki
2018-09-03  8:30     ` Miquel Raynal
2018-09-03  8:50     ` Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 21/31] mtd: mtdpart: balance debug messages Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 22/31] cmd: ubi: delete useless and misleading definitions Miquel Raynal
2018-08-16 15:50   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 23/31] cmd: mtdparts: add fallthrough in switch statement Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 24/31] cmd: mtdparts: accept spi-nand devices Miquel Raynal
2018-08-16 15:53   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 25/31] cmd: mtdparts: add a generic 'mtdparts' parser Miquel Raynal
2018-08-16 17:04   ` Boris Brezillon [this message]
2018-08-16 15:30 ` [U-Boot] [PATCH v6 26/31] mtd: uclass: add probe function Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 27/31] mtd: move mtdparts_init() declaration Miquel Raynal
2018-08-16 16:05   ` Boris Brezillon
2018-08-20  9:06     ` Miquel Raynal
2018-08-16 15:30 ` [U-Boot] [PATCH v6 28/31] mtd: mtdpart: implement proper partition handling Miquel Raynal
2018-08-16 16:19   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 29/31] cmd: mtd: add 'mtd' command Miquel Raynal
2018-08-16 16:22   ` Boris Brezillon
2018-08-20 16:08     ` Miquel Raynal
2018-08-20 16:30       ` Boris Brezillon
2018-08-16 19:50   ` Boris Brezillon
2018-08-16 20:38   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 30/31] cmd: mtdparts: try to probe the MTD devices as a fallback Miquel Raynal
2018-08-16 17:11   ` Boris Brezillon
2018-08-16 15:30 ` [U-Boot] [PATCH v6 31/31] cmd: ubi: clean the partition handling Miquel Raynal
2018-08-16 19:17   ` Boris Brezillon
2018-08-16 16:58 ` [U-Boot] [PATCH v6 00/31] SPI-NAND support Boris Brezillon
2018-08-17  8:38   ` Miquel Raynal
2018-08-30 12:43     ` Miquel Raynal
2018-09-02 18:17       ` Jagan Teki
2018-09-03  6:45         ` Miquel Raynal
2018-09-03  7:45           ` Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180816190443.0489938c@bbrezillon \
    --to=boris.brezillon@bootlin.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox