From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 00/17] clk: Add Allwinner CLK, RESET support
Date: Sun, 26 Aug 2018 18:08:09 +0530 [thread overview]
Message-ID: <20180826123826.19243-1-jagan@amarulasolutions.com> (raw)
This series is refined version of Allwinner CLK, RESET
support for previous version[1] which implements CLK
and RESET for USB.
Tested on A64, H3, H5, R40, A83T, A20.
Changes for v4:
- Collect Acked-by and Tested-by
- Rebase on master
- Fixed checkpatch warnings
- Fixed SPDX licence
- return 0 if reset request ops not used
Changes for v3:
- Added H6 CLK, RESET changes
- Added fastboot mmc device patch
- Added fat env mmc device patch
- Update bootorder to check eMMC as per DT
- Collect Tested-by
Changes for v2:
- Fixed few warnings and spaces in reset descriptor table
- Add Ethernet CLK and RESET changes
All these changes available at u-boot-sunxi/next
Note:
- V3S, A23, A33 still need to test
[1] https://patchwork.ozlabs.org/cover/959324/
Any inputs,
Jagan.
Jagan Teki (17):
clk: Add Allwinner A64 CLK driver
reset: Return 0 if no request ops
reset: Add Allwinner RESET driver
clk: sunxi: Add Allwinner H3/H5 CLK driver
clk: sunxi: Add Allwinner A10/A20 CLK driver
clk: sunxi: Add Allwinner A10s/A13 CLK driver
clk: sunxi: Add Allwinner A31 CLK driver
clk: sunxi: Add Allwinner A23 CLK driver
clk: sunxi: a23: Add CLK support for A33
clk: sunxi: Add Allwinner A83T CLK driver
clk: sunxi: Add Allwinner R40 CLK driver
clk: sunxi: Add Allwinner V3S CLK driver
sunxi: Enable CLK
phy: sun4i-usb: Use CLK and RESET support
musb-new: sunxi: Use CLK and RESET support
sunxi: usb: Switch to Generic host controllers
usb: host: Drop [e-o]hci-sunxi drivers
arch/arm/include/asm/arch-sunxi/ccu.h | 72 ++++++
arch/arm/mach-sunxi/Kconfig | 12 +
configs/A10-OLinuXino-Lime_defconfig | 1 +
configs/A10s-OLinuXino-M_defconfig | 1 +
configs/A13-OLinuXinoM_defconfig | 1 +
configs/A13-OLinuXino_defconfig | 1 +
configs/A20-OLinuXino-Lime2-eMMC_defconfig | 1 +
configs/A20-OLinuXino-Lime2_defconfig | 1 +
configs/A20-OLinuXino-Lime_defconfig | 1 +
configs/A20-Olimex-SOM204-EVB_defconfig | 2 +
configs/Auxtek-T003_defconfig | 1 +
configs/Auxtek-T004_defconfig | 1 +
configs/Bananapi_defconfig | 1 +
configs/Bananapi_m2m_defconfig | 1 +
configs/Bananapro_defconfig | 1 +
configs/CHIP_defconfig | 1 +
configs/CHIP_pro_defconfig | 1 +
configs/CSQ_CS908_defconfig | 1 +
configs/Colombus_defconfig | 1 +
configs/Cubieboard2_defconfig | 1 +
configs/Cubieboard_defconfig | 1 +
configs/Cubietruck_plus_defconfig | 1 +
configs/Hummingbird_A31_defconfig | 1 +
configs/Itead_Ibox_A20_defconfig | 1 +
configs/Linksprite_pcDuino3_Nano_defconfig | 1 +
configs/Linksprite_pcDuino3_defconfig | 1 +
configs/Linksprite_pcDuino_defconfig | 1 +
configs/MK808C_defconfig | 1 +
configs/Marsboard_A10_defconfig | 1 +
configs/Mele_A1000G_quad_defconfig | 1 +
configs/Mele_A1000_defconfig | 1 +
configs/Mele_I7_defconfig | 1 +
configs/Mele_M3_defconfig | 1 +
configs/Mele_M5_defconfig | 1 +
configs/Mele_M9_defconfig | 1 +
configs/Mini-X_defconfig | 1 +
configs/Orangepi_defconfig | 1 +
configs/Orangepi_mini_defconfig | 1 +
configs/Sinlinx_SinA31s_defconfig | 1 +
configs/Sinlinx_SinA33_defconfig | 1 +
configs/Sinovoip_BPI_M2_Plus_defconfig | 1 +
configs/Sinovoip_BPI_M2_defconfig | 1 +
configs/Sinovoip_BPI_M3_defconfig | 1 +
configs/Wexler_TAB7200_defconfig | 1 +
configs/Wobo_i5_defconfig | 1 +
configs/a64-olinuxino_defconfig | 1 +
configs/ba10_tv_box_defconfig | 1 +
configs/bananapi_m1_plus_defconfig | 1 +
configs/bananapi_m64_defconfig | 1 +
configs/ga10h_v1_1_defconfig | 1 +
configs/h8_homlet_v2_defconfig | 1 +
configs/i12-tvbox_defconfig | 1 +
configs/icnova-a20-swac_defconfig | 1 +
configs/inet1_defconfig | 1 +
configs/inet_q972_defconfig | 1 +
configs/jesurun_q5_defconfig | 1 +
configs/libretech_all_h3_cc_h2_plus_defconfig | 1 +
configs/libretech_all_h3_cc_h3_defconfig | 1 +
configs/libretech_all_h3_cc_h5_defconfig | 1 +
configs/mixtile_loftq_defconfig | 1 +
configs/mk802_a10s_defconfig | 1 +
configs/mk802_defconfig | 1 +
configs/mk802ii_defconfig | 1 +
configs/nanopi_a64_defconfig | 1 +
configs/nanopi_m1_defconfig | 1 +
configs/nanopi_m1_plus_defconfig | 1 +
configs/nanopi_neo2_defconfig | 1 +
configs/nanopi_neo_air_defconfig | 1 +
configs/nanopi_neo_defconfig | 1 +
configs/nanopi_neo_plus2_defconfig | 1 +
configs/orangepi_2_defconfig | 1 +
configs/orangepi_lite_defconfig | 1 +
configs/orangepi_one_defconfig | 1 +
configs/orangepi_pc2_defconfig | 1 +
configs/orangepi_pc_defconfig | 1 +
configs/orangepi_pc_plus_defconfig | 1 +
configs/orangepi_plus2e_defconfig | 1 +
configs/orangepi_plus_defconfig | 1 +
configs/orangepi_prime_defconfig | 1 +
configs/orangepi_r1_defconfig | 1 +
configs/orangepi_win_defconfig | 1 +
configs/orangepi_zero_defconfig | 1 +
configs/orangepi_zero_plus2_defconfig | 1 +
configs/orangepi_zero_plus_defconfig | 1 +
configs/parrot_r16_defconfig | 1 +
configs/pine64_plus_defconfig | 1 +
configs/r7-tv-dongle_defconfig | 1 +
configs/sopine_baseboard_defconfig | 1 +
configs/sun8i_a23_evb_defconfig | 1 +
configs/sunxi_Gemei_G9_defconfig | 1 +
configs/tbs_a711_defconfig | 1 +
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/sunxi/Kconfig | 75 ++++++
drivers/clk/sunxi/Makefile | 17 ++
drivers/clk/sunxi/clk_a10.c | 77 ++++++
drivers/clk/sunxi/clk_a10s.c | 74 ++++++
drivers/clk/sunxi/clk_a23.c | 81 ++++++
drivers/clk/sunxi/clk_a31.c | 86 +++++++
drivers/clk/sunxi/clk_a64.c | 84 +++++++
drivers/clk/sunxi/clk_a83t.c | 81 ++++++
drivers/clk/sunxi/clk_h3.c | 97 ++++++++
drivers/clk/sunxi/clk_r40.c | 88 +++++++
drivers/clk/sunxi/clk_sunxi.c | 58 +++++
drivers/clk/sunxi/clk_v3s.c | 69 ++++++
drivers/phy/allwinner/phy-sun4i-usb.c | 77 ++++--
drivers/reset/Kconfig | 8 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-sunxi.c | 125 ++++++++++
drivers/reset/reset-uclass.c | 3 +
drivers/usb/host/Kconfig | 2 +
drivers/usb/host/Makefile | 2 -
drivers/usb/host/ehci-sunxi.c | 204 ---------------
drivers/usb/host/ohci-sunxi.c | 233 ------------------
drivers/usb/musb-new/sunxi.c | 87 ++++---
include/configs/sun4i.h | 4 -
include/configs/sun50i.h | 5 -
include/configs/sun5i.h | 4 -
include/configs/sun6i.h | 4 -
include/configs/sun7i.h | 4 -
include/configs/sun8i.h | 4 -
include/configs/sunxi-common.h | 1 -
scripts/config_whitelist.txt | 2 -
123 files changed, 1310 insertions(+), 523 deletions(-)
create mode 100644 arch/arm/include/asm/arch-sunxi/ccu.h
create mode 100644 drivers/clk/sunxi/Kconfig
create mode 100644 drivers/clk/sunxi/Makefile
create mode 100644 drivers/clk/sunxi/clk_a10.c
create mode 100644 drivers/clk/sunxi/clk_a10s.c
create mode 100644 drivers/clk/sunxi/clk_a23.c
create mode 100644 drivers/clk/sunxi/clk_a31.c
create mode 100644 drivers/clk/sunxi/clk_a64.c
create mode 100644 drivers/clk/sunxi/clk_a83t.c
create mode 100644 drivers/clk/sunxi/clk_h3.c
create mode 100644 drivers/clk/sunxi/clk_r40.c
create mode 100644 drivers/clk/sunxi/clk_sunxi.c
create mode 100644 drivers/clk/sunxi/clk_v3s.c
create mode 100644 drivers/reset/reset-sunxi.c
delete mode 100644 drivers/usb/host/ehci-sunxi.c
delete mode 100644 drivers/usb/host/ohci-sunxi.c
--
2.18.0.321.gffc6fa0e3
next reply other threads:[~2018-08-26 12:38 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-26 12:38 Jagan Teki [this message]
2018-08-26 12:38 ` [U-Boot] [PATCH v4 01/17] clk: Add Allwinner A64 CLK driver Jagan Teki
2018-08-27 14:27 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 02/17] reset: Return 0 if no request ops Jagan Teki
2018-08-30 0:28 ` Simon Glass
2018-08-26 12:38 ` [U-Boot] [PATCH v4 03/17] reset: Add Allwinner RESET driver Jagan Teki
2018-08-27 14:33 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 04/17] clk: sunxi: Add Allwinner H3/H5 CLK driver Jagan Teki
2018-08-27 14:36 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 05/17] clk: sunxi: Add Allwinner A10/A20 " Jagan Teki
2018-08-27 14:37 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 06/17] clk: sunxi: Add Allwinner A10s/A13 " Jagan Teki
2018-08-27 14:38 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 07/17] clk: sunxi: Add Allwinner A31 " Jagan Teki
2018-08-27 14:39 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 08/17] clk: sunxi: Add Allwinner A23 " Jagan Teki
2018-08-27 14:39 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 09/17] clk: sunxi: a23: Add CLK support for A33 Jagan Teki
2018-08-27 14:40 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 10/17] clk: sunxi: Add Allwinner A83T CLK driver Jagan Teki
2018-08-27 14:41 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 11/17] clk: sunxi: Add Allwinner R40 " Jagan Teki
2018-08-27 15:02 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 12/17] clk: sunxi: Add Allwinner V3S " Jagan Teki
2018-08-27 15:02 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 13/17] sunxi: Enable CLK Jagan Teki
2018-08-26 12:38 ` [U-Boot] [PATCH v4 14/17] phy: sun4i-usb: Use CLK and RESET support Jagan Teki
2018-08-27 15:03 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 15/17] musb-new: sunxi: " Jagan Teki
2018-08-26 12:38 ` [U-Boot] [PATCH v4 16/17] sunxi: usb: Switch to Generic host controllers Jagan Teki
2018-08-27 15:04 ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 17/17] usb: host: Drop [e-o]hci-sunxi drivers Jagan Teki
2018-08-27 15:03 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180826123826.19243-1-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox