public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 04/17] clk: sunxi: Add Allwinner H3/H5 CLK driver
Date: Sun, 26 Aug 2018 18:08:13 +0530	[thread overview]
Message-ID: <20180826123826.19243-5-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180826123826.19243-1-jagan@amarulasolutions.com>

Add initial clock driver for Allwinner H3/H5.

- Implement USB bus and USB clocks via ccu_clk_map descriptor
  for H3/H5, so it can accessed in common clk enable and disable
  functions from clk_sunxi.c
- Implement USB bus and USB resets via ccu_reset_map descriptor
  for H3/H5, so it can accessed in common reset deassert and assert
  functions from reset-sunxi.c

Tested-by: Jagan Teki <jagan@amarulasolutions.com> #BPI-M2+, OPI-PC2
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 drivers/clk/sunxi/Kconfig  |  7 +++
 drivers/clk/sunxi/Makefile |  1 +
 drivers/clk/sunxi/clk_h3.c | 97 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 105 insertions(+)
 create mode 100644 drivers/clk/sunxi/clk_h3.c

diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
index 041d711e58..c3713bbac2 100644
--- a/drivers/clk/sunxi/Kconfig
+++ b/drivers/clk/sunxi/Kconfig
@@ -9,6 +9,13 @@ config CLK_SUNXI
 
 if CLK_SUNXI
 
+config CLK_SUN8I_H3
+	bool "Clock driver for Allwinner H3/H5"
+	default MACH_SUNXI_H3_H5
+	help
+	  This enables common clock driver support for platforms based
+	  on Allwinner H3/H5 SoC.
+
 config CLK_SUN50I_A64
 	bool "Clock driver for Allwinner A64"
 	default MACH_SUN50I
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index fb20d28333..dec49f27a1 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -6,4 +6,5 @@
 
 obj-$(CONFIG_CLK_SUNXI) += clk_sunxi.o
 
+obj-$(CONFIG_CLK_SUN8I_H3) += clk_h3.o
 obj-$(CONFIG_CLK_SUN50I_A64) += clk_a64.o
diff --git a/drivers/clk/sunxi/clk_h3.c b/drivers/clk/sunxi/clk_h3.c
new file mode 100644
index 0000000000..cb2f22810a
--- /dev/null
+++ b/drivers/clk/sunxi/clk_h3.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Amarula Solutions.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/arch/ccu.h>
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+static struct ccu_clk_map h3_clks[] = {
+	[CLK_BUS_OTG]		= { 0x060, BIT(23), NULL },
+	[CLK_BUS_EHCI0]		= { 0x060, BIT(24), NULL },
+	[CLK_BUS_EHCI1]		= { 0x060, BIT(25), NULL },
+	[CLK_BUS_EHCI2]		= { 0x060, BIT(26), NULL },
+	[CLK_BUS_EHCI3]		= { 0x060, BIT(27), NULL },
+	[CLK_BUS_OHCI0]		= { 0x060, BIT(28), NULL },
+	[CLK_BUS_OHCI1]		= { 0x060, BIT(29), NULL },
+	[CLK_BUS_OHCI2]		= { 0x060, BIT(30), NULL },
+	[CLK_BUS_OHCI3]		= { 0x060, BIT(31), NULL },
+
+	[CLK_USB_PHY0]		= { 0x0cc, BIT(8), NULL },
+	[CLK_USB_PHY1]		= { 0x0cc, BIT(9), NULL },
+	[CLK_USB_PHY2]		= { 0x0cc, BIT(10), NULL },
+	[CLK_USB_PHY3]		= { 0x0cc, BIT(11), NULL },
+	[CLK_USB_OHCI0]		= { 0x0cc, BIT(16), NULL },
+	[CLK_USB_OHCI1]		= { 0x0cc, BIT(17), NULL },
+	[CLK_USB_OHCI2]		= { 0x0cc, BIT(18), NULL },
+	[CLK_USB_OHCI3]		= { 0x0cc, BIT(19), NULL },
+};
+
+static struct ccu_reset_map h3_resets[] = {
+	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
+	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
+	[RST_USB_PHY3]		= { 0x0cc, BIT(3) },
+
+	[RST_BUS_OTG]		= { 0x2c0, BIT(23) },
+	[RST_BUS_EHCI0]		= { 0x2c0, BIT(24) },
+	[RST_BUS_EHCI1]		= { 0x2c0, BIT(25) },
+	[RST_BUS_EHCI2]		= { 0x2c0, BIT(26) },
+	[RST_BUS_EHCI3]		= { 0x2c0, BIT(27) },
+	[RST_BUS_OHCI0]		= { 0x2c0, BIT(28) },
+	[RST_BUS_OHCI1]		= { 0x2c0, BIT(29) },
+	[RST_BUS_OHCI2]		= { 0x2c0, BIT(30) },
+	[RST_BUS_OHCI3]		= { 0x2c0, BIT(31) },
+};
+
+static const struct ccu_desc sun8i_h3_ccu_desc = {
+	.clks = h3_clks,
+	.num_clks = ARRAY_SIZE(h3_clks),
+
+	.resets = h3_resets,
+	.num_resets =  ARRAY_SIZE(h3_resets),
+};
+
+static int h3_clk_probe(struct udevice *dev)
+{
+	struct sunxi_clk_priv *priv = dev_get_priv(dev);
+
+	priv->base = dev_read_addr_ptr(dev);
+	if (!priv->base)
+		return -ENOMEM;
+
+	priv->desc = (const struct ccu_desc *)dev_get_driver_data(dev);
+	if (!priv->desc)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int h3_clk_bind(struct udevice *dev)
+{
+	return sunxi_reset_bind(dev, 53);
+}
+
+static const struct udevice_id h3_clk_ids[] = {
+	{ .compatible = "allwinner,sun8i-h3-ccu",
+	  .data = (ulong)&sun8i_h3_ccu_desc },
+	{ .compatible = "allwinner,sun50i-h5-ccu",
+	  .data = (ulong)&sun8i_h3_ccu_desc },
+	{ }
+};
+
+U_BOOT_DRIVER(clk_sun8i_h3) = {
+	.name		= "sun8i_h3_ccu",
+	.id		= UCLASS_CLK,
+	.of_match	= h3_clk_ids,
+	.priv_auto_alloc_size	= sizeof(struct sunxi_clk_priv),
+	.ops		= &sunxi_clk_ops,
+	.probe		= h3_clk_probe,
+	.bind		= h3_clk_bind,
+};
-- 
2.18.0.321.gffc6fa0e3

  parent reply	other threads:[~2018-08-26 12:38 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-26 12:38 [U-Boot] [PATCH v4 00/17] clk: Add Allwinner CLK, RESET support Jagan Teki
2018-08-26 12:38 ` [U-Boot] [PATCH v4 01/17] clk: Add Allwinner A64 CLK driver Jagan Teki
2018-08-27 14:27   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 02/17] reset: Return 0 if no request ops Jagan Teki
2018-08-30  0:28   ` Simon Glass
2018-08-26 12:38 ` [U-Boot] [PATCH v4 03/17] reset: Add Allwinner RESET driver Jagan Teki
2018-08-27 14:33   ` Maxime Ripard
2018-08-26 12:38 ` Jagan Teki [this message]
2018-08-27 14:36   ` [U-Boot] [PATCH v4 04/17] clk: sunxi: Add Allwinner H3/H5 CLK driver Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 05/17] clk: sunxi: Add Allwinner A10/A20 " Jagan Teki
2018-08-27 14:37   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 06/17] clk: sunxi: Add Allwinner A10s/A13 " Jagan Teki
2018-08-27 14:38   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 07/17] clk: sunxi: Add Allwinner A31 " Jagan Teki
2018-08-27 14:39   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 08/17] clk: sunxi: Add Allwinner A23 " Jagan Teki
2018-08-27 14:39   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 09/17] clk: sunxi: a23: Add CLK support for A33 Jagan Teki
2018-08-27 14:40   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 10/17] clk: sunxi: Add Allwinner A83T CLK driver Jagan Teki
2018-08-27 14:41   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 11/17] clk: sunxi: Add Allwinner R40 " Jagan Teki
2018-08-27 15:02   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 12/17] clk: sunxi: Add Allwinner V3S " Jagan Teki
2018-08-27 15:02   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 13/17] sunxi: Enable CLK Jagan Teki
2018-08-26 12:38 ` [U-Boot] [PATCH v4 14/17] phy: sun4i-usb: Use CLK and RESET support Jagan Teki
2018-08-27 15:03   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 15/17] musb-new: sunxi: " Jagan Teki
2018-08-26 12:38 ` [U-Boot] [PATCH v4 16/17] sunxi: usb: Switch to Generic host controllers Jagan Teki
2018-08-27 15:04   ` Maxime Ripard
2018-08-26 12:38 ` [U-Boot] [PATCH v4 17/17] usb: host: Drop [e-o]hci-sunxi drivers Jagan Teki
2018-08-27 15:03   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180826123826.19243-5-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox