[U-Boot] [PULL] Please pull u-boot-imx

[Tom Rini <trini@konsulko.com>]

On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
> 
>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
> 12:26:16 -0400)
> 
> are available in the Git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:
> 
>   imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
> 12:08:43 +0200)
> 
> ----------------------------------------------------------------
> Alex Kiernan (1):
>       Cleanup CONFIG_BOOTDELAY on cl-som-imx7
> 
> Anson Huang (3):
>       imx: mx7: psci: improve cpu hotplug flow
>       imx: mx7: add gpc initialization for low power mode
>       imx: mx7: add system suspend/resume support
> 
> Denis Zalevskiy (6):
>       board: ge: Remove EEPROM bus param from read_vpd()
>       board: ge: Move VPD EEPROM configuration to the defconfig
>       bootcount: i2c: Add bus switching to the I2C bootcount driver
>       bootcount: Configure length limit for I2C bootcount
>       board: ge: Move VPD reading to the vpd_reader
>       board: ge: Store bootcount in EEPROM on PPD and Bx50v3
> 
> Martin Kaiser (1):
>       watchdog: mx25: use the imx_watchdog driver for mx25
> 
> Stefan Agner (2):
>       board: toradex: common: fail gracefully on missing NAND chip
>       colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
> 
> Stefano Babic (2):
>       Merge branch 'master' of git://git.denx.de/u-boot into master
>       imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
> 
> Sébastien Szymanski (1):
>       ARM: opos6ul: make the board boot again
> 
> Ye Li (6):
>       imx: imx6sx-sdb: Enable DM QSPI driver
>       imx: imx6sx-sabreauto: convert to use DM QSPI driver
>       imx: imx7d-sdb: Add DM QSPI support
>       dts: imx6ul: Update alias to support DM
>       dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
>       imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
> 
>  arch/arm/dts/Makefile                             |   7 +-
>  arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi         |  16 +
>  arch/arm/dts/imx6sx-sabreauto.dts                 |  40 ++
>  arch/arm/dts/imx6sx-sdb-u-boot.dtsi               |  16 +
>  arch/arm/dts/imx6sx.dtsi                          |  12 +-
>  arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi         |  10 +
>  arch/arm/dts/imx6ul-14x14-evk.dts                 | 427 +++++++++++++++++++
>  arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi           |  10 +
>  arch/arm/dts/imx6ul-9x9-evk.dts                   | 471
> +++++++++++++++++++++
>  arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi           |  28 ++
>  arch/arm/dts/imx6ul-opos6ul.dtsi                  |   2 -
>  arch/arm/dts/imx6ul-opos6uldev-u-boot.dts         |  25 ++
>  arch/arm/dts/imx6ul-opos6uldev.dts                |   2 -
>  arch/arm/dts/imx6ul.dtsi                          |  13 +-
>  arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi           |  10 +
>  arch/arm/dts/imx7d-sdb-qspi.dts                   |  44 ++
>  arch/arm/dts/imx7d-sdb.dts                        |   6 +-
>  arch/arm/dts/imx7d.dtsi                           |  12 +
>  arch/arm/dts/imx7s.dtsi                           |  22 +-
>  arch/arm/include/asm/arch-mx25/imx-regs.h         |   1 +
>  arch/arm/mach-imx/mx7/Makefile                    |   2 +-
>  arch/arm/mach-imx/mx7/psci-mx7.c                  | 472
> +++++++++++++++++++++-
>  arch/arm/mach-imx/mx7/psci-suspend.S              |  67 +++
>  arch/arm/mach-imx/mx7/soc.c                       | 103 +++++
>  board/freescale/mx6sxsabreauto/mx6sxsabreauto.c   |  24 --
>  board/freescale/mx6sxsabresd/mx6sxsabresd.c       |  25 --
>  board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++--------
>  board/freescale/mx7dsabresd/mx7dsabresd.c         |  16 -
>  board/ge/bx50v3/Kconfig                           |   2 +
>  board/ge/bx50v3/bx50v3.c                          |  57 +--
>  board/ge/common/Kconfig                           |  14 +
>  board/ge/common/vpd_reader.c                      |  57 ++-
>  board/ge/common/vpd_reader.h                      |  16 +-
>  board/ge/mx53ppd/Kconfig                          |   2 +
>  board/ge/mx53ppd/mx53ppd.c                        |  50 +--
>  board/toradex/colibri_imx7/Kconfig                |  42 +-
>  board/toradex/colibri_imx7/MAINTAINERS            |   4 +
>  board/toradex/colibri_imx7/colibri_imx7.c         |  41 +-
>  board/toradex/common/tdx-cfg-block.c              |   7 +-
>  configs/ge_bx50v3_defconfig                       |  27 +-
>  configs/mx53ppd_defconfig                         |  29 +-
>  configs/mx6sxsabreauto_defconfig                  |   2 +
>  configs/mx6sxsabresd_defconfig                    |   7 +
>  configs/mx6ul_14x14_evk_defconfig                 |  17 +-
>  configs/mx6ul_9x9_evk_defconfig                   |  20 +-
>  configs/mx7dsabresd_qspi_defconfig                |  84 ++++
>  configs/opos6uldev_defconfig                      |   2 +-
>  drivers/bootcount/Kconfig                         |  21 +-
>  drivers/bootcount/bootcount_i2c.c                 |  78 +++-
>  drivers/watchdog/Makefile                         |   2 +-
>  include/configs/cl-som-imx7.h                     |   2 -
>  include/configs/colibri_imx7.h                    |  90 ++++-
>  include/configs/ge_bx50v3.h                       |   6 +-
>  include/configs/mx53ppd.h                         |   6 +-
>  include/configs/mx6sxsabresd.h                    |   4 +
>  include/configs/mx6ul_14x14_evk.h                 |  13 +-
>  include/configs/mx7dsabresd.h                     |   4 +-
>  57 files changed, 2376 insertions(+), 421 deletions(-)

This is a lot.  I know I should have tagged -rc3 this past Monday, but
forgot (and so, yeah, I need to get back into my habit of calendar
reminders), but still, the release is 10 days away.  It looks like
there's a lot of new stuff in here too, not just clean-ups.  Are you
sure this is all appropriate at this stage?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180831/9a0809e0/attachment.sig>