public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot] [PATCH 1/2] Configs: am3517_evm: Remove TWL4030 reference
@ 2018-08-19 16:11 Adam Ford
  2018-08-19 16:11 ` [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT Adam Ford
  2018-09-18 21:27 ` [U-Boot] [U-Boot, 1/2] Configs: am3517_evm: Remove TWL4030 reference Tom Rini
  0 siblings, 2 replies; 5+ messages in thread
From: Adam Ford @ 2018-08-19 16:11 UTC (permalink / raw)
  To: u-boot

This SOM and kit do not nor have they ever had a twl4030 PMIC.
This patch removes the references to it.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index 41ab3fd373..61a401c4c1 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -43,6 +43,7 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
 CONFIG_SPL_NAND_SIMPLE=y
+# CONFIG_TWL4030_POWER is not set
 CONFIG_CONS_INDEX=3
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT
  2018-08-19 16:11 [U-Boot] [PATCH 1/2] Configs: am3517_evm: Remove TWL4030 reference Adam Ford
@ 2018-08-19 16:11 ` Adam Ford
  2018-08-28  2:27   ` Derald D. Woods
  2018-09-18 21:27   ` [U-Boot] [U-Boot,2/2] " Tom Rini
  2018-09-18 21:27 ` [U-Boot] [U-Boot, 1/2] Configs: am3517_evm: Remove TWL4030 reference Tom Rini
  1 sibling, 2 replies; 5+ messages in thread
From: Adam Ford @ 2018-08-19 16:11 UTC (permalink / raw)
  To: u-boot

DM_I2C_COMPAT is somehow being enabled outside of Kconfig, so
this explicitly undefines it in the header file, and brackets
the I2C initialization around an #ifdef to not manually
initialize the I2C controller when the DM_I2C is enabled.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index da8be22085..6f728398c3 100644
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -108,10 +108,11 @@ int misc_init_r(void)
 	volatile unsigned int ctr;
 	u32 reset;
 
+#if !defined(CONFIG_DM_I2C)
 #ifdef CONFIG_SYS_I2C_OMAP24XX
 	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
-
+#endif
 	omap_die_id_display();
 
 	am3517_evm_musb_init();
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index c767961562..507f12ef9e 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -25,8 +25,8 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 
 #include <configs/ti_omap3_common.h>
-#undef CONFIG_SDRC	/* Disable SDRC since we have EMIF4 */
 
+#undef CONFIG_DM_I2C_COMPAT
 #define CONFIG_MISC_INIT_R
 #define CONFIG_REVISION_TAG
 
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT
  2018-08-19 16:11 ` [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT Adam Ford
@ 2018-08-28  2:27   ` Derald D. Woods
  2018-09-18 21:27   ` [U-Boot] [U-Boot,2/2] " Tom Rini
  1 sibling, 0 replies; 5+ messages in thread
From: Derald D. Woods @ 2018-08-28  2:27 UTC (permalink / raw)
  To: u-boot

On Sun, Aug 19, 2018 at 11:11:03AM -0500, Adam Ford wrote:
> DM_I2C_COMPAT is somehow being enabled outside of Kconfig, so
> this explicitly undefines it in the header file, and brackets
> the I2C initialization around an #ifdef to not manually
> initialize the I2C controller when the DM_I2C is enabled.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>

There are some merge conflicts, but otherwise the changes here and patch
1 of the series allow DM_I2C without compatibility.

[...]
AM3517_EVM # i2c dev 0
Setting bus to 0
AM3517_EVM # i2c probe
Valid chip addresses: 30 31 32 33 34 35 36 37 48 4B
AM3517_EVM # i2c dev 1
Setting bus to 1
AM3517_EVM # i2c probe
Valid chip addresses: 21
[...]

Tested-by: Derald D. Woods <woods.technical@gmail.com>

> 
> diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
> index da8be22085..6f728398c3 100644
> --- a/board/logicpd/am3517evm/am3517evm.c
> +++ b/board/logicpd/am3517evm/am3517evm.c
> @@ -108,10 +108,11 @@ int misc_init_r(void)
>  	volatile unsigned int ctr;
>  	u32 reset;
>  
> +#if !defined(CONFIG_DM_I2C)
>  #ifdef CONFIG_SYS_I2C_OMAP24XX
>  	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
>  #endif
> -
> +#endif
>  	omap_die_id_display();
>  
>  	am3517_evm_musb_init();
> diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
> index c767961562..507f12ef9e 100644
> --- a/include/configs/am3517_evm.h
> +++ b/include/configs/am3517_evm.h
> @@ -25,8 +25,8 @@
>  #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
>  
>  #include <configs/ti_omap3_common.h>
> -#undef CONFIG_SDRC	/* Disable SDRC since we have EMIF4 */
>  
> +#undef CONFIG_DM_I2C_COMPAT
>  #define CONFIG_MISC_INIT_R
>  #define CONFIG_REVISION_TAG
>  
> -- 
> 2.17.1
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [U-Boot] [U-Boot, 1/2] Configs: am3517_evm: Remove TWL4030 reference
  2018-08-19 16:11 [U-Boot] [PATCH 1/2] Configs: am3517_evm: Remove TWL4030 reference Adam Ford
  2018-08-19 16:11 ` [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT Adam Ford
@ 2018-09-18 21:27 ` Tom Rini
  1 sibling, 0 replies; 5+ messages in thread
From: Tom Rini @ 2018-09-18 21:27 UTC (permalink / raw)
  To: u-boot

On Sun, Aug 19, 2018 at 11:11:02AM -0500, Adam Ford wrote:

> This SOM and kit do not nor have they ever had a twl4030 PMIC.
> This patch removes the references to it.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> 
> diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
> index 41ab3fd373..61a401c4c1 100644

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180918/0980e6ba/attachment.sig>

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [U-Boot] [U-Boot,2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT
  2018-08-19 16:11 ` [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT Adam Ford
  2018-08-28  2:27   ` Derald D. Woods
@ 2018-09-18 21:27   ` Tom Rini
  1 sibling, 0 replies; 5+ messages in thread
From: Tom Rini @ 2018-09-18 21:27 UTC (permalink / raw)
  To: u-boot

On Sun, Aug 19, 2018 at 11:11:03AM -0500, Adam Ford wrote:

> DM_I2C_COMPAT is somehow being enabled outside of Kconfig, so
> this explicitly undefines it in the header file, and brackets
> the I2C initialization around an #ifdef to not manually
> initialize the I2C controller when the DM_I2C is enabled.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> Tested-by: Derald D. Woods <woods.technical@gmail.com>
> 
> diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
> index da8be22085..6f728398c3 100644

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180918/d2f05c85/attachment.sig>

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2018-09-18 21:27 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-08-19 16:11 [U-Boot] [PATCH 1/2] Configs: am3517_evm: Remove TWL4030 reference Adam Ford
2018-08-19 16:11 ` [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT Adam Ford
2018-08-28  2:27   ` Derald D. Woods
2018-09-18 21:27   ` [U-Boot] [U-Boot,2/2] " Tom Rini
2018-09-18 21:27 ` [U-Boot] [U-Boot, 1/2] Configs: am3517_evm: Remove TWL4030 reference Tom Rini

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox