[U-Boot] [PATCH 6/7] m68k: add stmark2 fdt support

[Angelo Dureghello <angelo@sysam.it>]

This patch adds stmark2 board fdt support to the m68k arch.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
---
 arch/m68k/dts/Makefile    | 12 ++++++++++++
 arch/m68k/dts/stmark2.dts | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)
 create mode 100644 arch/m68k/dts/Makefile
 create mode 100644 arch/m68k/dts/stmark2.dts

diff --git a/arch/m68k/dts/Makefile b/arch/m68k/dts/Makefile
new file mode 100644
index 0000000000..9d2e17abf3
--- /dev/null
+++ b/arch/m68k/dts/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_TARGET_STMARK2) += stmark2.dtb
+targets += $(dtb-y)
+
+DTC_FLAGS += -R 4 -p 0x1000
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+	@:
+
+clean-files := *.dtb
diff --git a/arch/m68k/dts/stmark2.dts b/arch/m68k/dts/stmark2.dts
new file mode 100644
index 0000000000..fd8ce4fa35
--- /dev/null
+++ b/arch/m68k/dts/stmark2.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Angelo Dureghello <angelo@sysam.it>
+ */
+
+/dts-v1/;
+/include/ "mcf5441x.dtsi"
+
+/ {
+	model = "Sysam stmark2";
+	compatible = "sysam,stmark2";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&dspi0 {
+	spi-mode = <3>;
+	status = "okay";
+
+	flash: is25lp128 at 1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <60000000>;
+		reg = <1>;
+	};
+};
-- 
2.19.0