From: Ramon Fried <ramon.fried@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 10/14] usb:ci_udc: Introduce init_after_reset phy function
Date: Fri, 21 Sep 2018 13:35:52 +0300 [thread overview]
Message-ID: <20180921103555.16240-11-ramon.fried@gmail.com> (raw)
In-Reply-To: <20180921103555.16240-1-ramon.fried@gmail.com>
MSM variant of Chipidea must reinitalize the phy
after controller reset.
Introduce ci_init_after_reset() weak function that
can be used to achieve the above init.
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
---
Changes in v2: None
drivers/usb/gadget/ci_udc.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c
index 2b9dbf06b9..8d23fab3b7 100644
--- a/drivers/usb/gadget/ci_udc.c
+++ b/drivers/usb/gadget/ci_udc.c
@@ -104,6 +104,10 @@ static struct usb_ep_ops ci_ep_ops = {
.free_request = ci_ep_free_request,
};
+__weak void ci_init_after_reset(struct ehci_ctrl *ctrl)
+{
+}
+
/* Init values for USB endpoints. */
static const struct usb_ep ci_ep_init[5] = {
[0] = { /* EP 0 */
@@ -887,6 +891,8 @@ static int ci_pullup(struct usb_gadget *gadget, int is_on)
writel(USBCMD_ITC(MICRO_8FRAME) | USBCMD_RST, &udc->usbcmd);
udelay(200);
+ ci_init_after_reset(controller.ctrl);
+
writel((unsigned long)controller.epts, &udc->epinitaddr);
/* select DEVICE mode */
--
2.18.0
next prev parent reply other threads:[~2018-09-21 10:35 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-21 10:35 [U-Boot] [PATCH v2 00/14] Introduce fastboot support for dragonboard410c Ramon Fried
2018-09-21 10:35 ` [U-Boot] [PATCH v2 01/14] ehci: Replace board_prepare_usb with board_usb_init Ramon Fried
2018-09-30 19:25 ` [U-Boot] [U-Boot, v2, " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 02/14] ehci: msm: Add missing platdata Ramon Fried
2018-09-30 19:25 ` [U-Boot] [U-Boot,v2,02/14] " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 03/14] dts: db410c: add alias for USB Ramon Fried
2018-09-30 19:25 ` [U-Boot] [U-Boot,v2,03/14] " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 04/14] db410c: serial# env using msm board serial Ramon Fried
2018-09-30 19:25 ` [U-Boot] [U-Boot, v2, " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 05/14] phy: db410c: Add MSM USB PHY driver Ramon Fried
2018-09-30 19:25 ` [U-Boot] [U-Boot,v2,05/14] " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 06/14] dts: db410c: Add bindings for MSM USB phy Ramon Fried
2018-09-30 19:25 ` [U-Boot] [U-Boot, v2, " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 07/14] configs: db410c: Enable USB PHY Ramon Fried
2018-09-30 19:25 ` [U-Boot] [U-Boot,v2,07/14] " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 08/14] ehci: msm: switch to generic PHY uclass Ramon Fried
2018-09-30 19:25 ` [U-Boot] [U-Boot, v2, " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 09/14] ehci: msm: use init_type in probe Ramon Fried
2018-09-30 19:25 ` [U-Boot] [U-Boot,v2,09/14] " Tom Rini
2018-09-21 10:35 ` Ramon Fried [this message]
2018-09-30 19:26 ` [U-Boot] [U-Boot, v2, 10/14] usb:ci_udc: Introduce init_after_reset phy function Tom Rini
2018-10-01 12:49 ` [U-Boot] [PATCH v2 " Lukasz Majewski
2018-09-21 10:35 ` [U-Boot] [PATCH v2 11/14] usb: ehci-msm: Add init_after_reset for CI_UDC Ramon Fried
2018-09-30 19:26 ` [U-Boot] [U-Boot, v2, " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 12/14] DB410c: Enable fastboot support Ramon Fried
2018-09-30 19:26 ` [U-Boot] [U-Boot,v2,12/14] " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 13/14] db410c: automatically launch fastboot Ramon Fried
2018-09-30 19:26 ` [U-Boot] [U-Boot, v2, " Tom Rini
2018-09-21 10:35 ` [U-Boot] [PATCH v2 14/14] usb:ci_udc: don't overwrite configuration on pullup Ramon Fried
2018-09-30 19:26 ` [U-Boot] [U-Boot, v2, " Tom Rini
2018-10-01 12:50 ` [U-Boot] [PATCH v2 " Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180921103555.16240-11-ramon.fried@gmail.com \
--to=ramon.fried@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox