[U-Boot] [PATCH v2 0/7] [RESEND] Improvements for the dwc3_generic driver

[Lukasz Majewski <lukma@denx.de>]

Hi Jean-Jacques,

> Hi Marek,
> 
> I haven't heard of you on this series.
> 
> It is already a resend and has been tested on 2 platforms (zcu100 and 
> dra7/am57).
> 
> Can you please consider it for inclusion?

This is not Marek to blame for the delay - I had some non open source
tasks to finish (and I do apologise for this situation).

Your patches are now under build testing on travis-CI:
https://travis-ci.org/lmajewski/u-boot-dfu/builds/431388980

I will send the PR after CI finish.

> 
> Thanks,
> 
> JJ
> 
> 
> 
> On 04/09/2018 15:42, Jean-Jacques Hiblot wrote:
> > Resending this series after rebasing on top of latest u-boot.
> >
> > This series aims at bringing improvements to the dwc3_generic
> > driver so that it can be used by most of the platforms using the
> > dwc3 controller.
> >
> > I tested this on with DRA7 and AM57x platforms for both Peripheral
> > and Host operations. The code to enable DM USB host & dev support
> > for those platforms will be submitted in a separate series.
> >
> > Michal Simek has tested this series:
> > " I have tested it on zcu100 with usb stick, usb to ethernet
> > converter and also dfu.
> > Tested-by: Michal Simek <michal.simek@xilinx.com>"
> >
> > Enhancements:
> > - use separate Kconfig option for DM USB Periphal and DM USB Host.
> > This allow platforms to keep their non-DM USB peripheral code and
> > use the DM USB host.
> > - fixes the bind/probe confusion in dwc3_generic. The probe is done
> > when the USB device is first needed.
> > - handles PHYs when in the peripheral mode. The code to handle the
> > PHYs is shared with the host side
> > - handles clock and reset
> > - bind host controller to the more generic driver 'xhci-dwc3'
> >
> >
> > Changes in v2:
> > - Updated commit log
> > - Fixed typo in thordown.c
> > - select DM_USB_DEV by default for zynqmp platforms
> >
> > Jean-Jacques Hiblot (7):
> >    usb: gadget: Do not call board_usb_xxx() directly in USB gadget
> >      drivers
> >    usb: introduce a separate config option for DM USB device
> >    usb: udc: implement DM versions of
> >      usb_gadget_initialize()/_release()/_handle_interrupt()
> >    dwc3_generic: do not probe the USB device driver when it's bound
> >    dwc3: move phy operation to core.c
> >    dwc3-generic: Handle the PHYs, the clocks and the reset lines
> >    dwc3-generic: Add select_dr_mode operation
> >
> >   arch/arm/Kconfig                  |   2 +
> >   cmd/fastboot.c                    |   4 +-
> >   cmd/rockusb.c                     |   4 +-
> >   cmd/thordown.c                    |   4 +-
> >   cmd/usb_gadget_sdp.c              |   4 +-
> >   cmd/usb_mass_storage.c            |   4 +-
> >   common/dfu.c                      |   6 +-
> >   drivers/usb/Kconfig               |   6 ++
> >   drivers/usb/dwc3/Kconfig          |   7 +-
> >   drivers/usb/dwc3/core.c           |  86 +++++++++++++++-
> >   drivers/usb/dwc3/dwc3-generic.c   | 207
> > +++++++++++++++++++++++++++++---------
> > drivers/usb/dwc3/ep0.c            |   1 -
> > drivers/usb/gadget/ether.c        |  38 +------
> > drivers/usb/gadget/udc/udc-core.c |  44 +++++++-
> > drivers/usb/host/xhci-dwc3.c      |  93 ++---------------
> > include/dwc3-uboot.h              |   7 ++
> > include/linux/usb/gadget.h        |  18 ++++ 17 files changed, 351
> > insertions(+), 184 deletions(-) 
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180921/5e9adc94/attachment.sig>