[U-Boot] [PATCH v13 5/7] cmd: mtd: add 'mtd' command

[Boris Brezillon <boris.brezillon@bootlin.com>]

Hi Adam,

On Mon, 8 Oct 2018 11:13:40 -0500
Adam Ford <aford173@gmail.com> wrote:

> On Wed, Oct 3, 2018 at 8:41 AM Adam Ford <aford173@gmail.com> wrote:
> >
> > On Wed, Oct 3, 2018 at 8:35 AM Miquel Raynal <miquel.raynal@bootlin.com> wrote:  
> > >
> > > Hi Adam,
> > >  
> > > > >  
> > > > > >  
> > > > > > >
> > > > > > > I can use the nand read/write functions and mtdparts lists the
> > > > > > > partitions, so I know nand works.  My defconfig
> > > > > > > lists the partitions, so if we're not supposed to use mtdparts, where
> > > > > > > I do store the partition information?  
> > > > > >
> > > > > > You are not supposed to use the mtdpart _command_, but the mtdparts
> > > > > > _variable_ must be used in order to declare the partitions.  
> > > > >
> > > > > OK.  If I can get MTD working, I'll work to remove the other commands
> > > > > like NAND and MTDPARTS  
> > > >
> > > > As of today, the process of migration is not entirely finished to DM
> > > > and you might still need to issue *first* a "nand probe" to register
> > > > the device operations.  
> > >
> > > Mmmh there is no nand probe actually, for raw nands like the one you
> > > have it should work out of the box.  
> 
> i haven't actually insterted debug code yet, but I started a quick
> code review.  There is a function called 'mtd_probe_uclass_mtd_devs'
> which states it will probe with DM compliant drivers.
> I am thinking the nand and/or GPMC drivers are not yet DM compliant
> yet.  The DM tree doesn't list any of the MTD parts.
> 
> Is it save to assume it just wont' work until the drives are DM
> compliant, or is this driver designed to play with the lower-level
> drivers as-is?

The whole point of this rework was to allow both old (non-DM compliant)
and new (DM compliant) drivers to be exposed the same way to the upper
layers. If it doesn't work for regular NAND drivers it's a bug, and we
should fix it.

Regards,

Boris