From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 11/14] mips: mt76xx: gardena-smart-gateway: Add board_late_init() to set LED def state
Date: Tue, 9 Oct 2018 08:59:13 +0200 [thread overview]
Message-ID: <20181009065916.31977-11-sr@denx.de> (raw)
In-Reply-To: <20181009065916.31977-1-sr@denx.de>
This is needed to set the LEDs automatically to a default state, as
configured in the dts.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
arch/mips/mach-mt7620/Kconfig | 1 +
board/gardena/smart-gateway-mt7688/board.c | 9 +++++++++
2 files changed, 10 insertions(+)
diff --git a/arch/mips/mach-mt7620/Kconfig b/arch/mips/mach-mt7620/Kconfig
index e42d918ba0..6f6952afd0 100644
--- a/arch/mips/mach-mt7620/Kconfig
+++ b/arch/mips/mach-mt7620/Kconfig
@@ -25,6 +25,7 @@ choice
config BOARD_GARDENA_SMART_GATEWAY_MT7688
bool "Gardena Smart Gateway"
depends on SOC_MT7620
+ select BOARD_LATE_INIT
select SUPPORTS_BOOT_RAM
help
Gardena Smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
diff --git a/board/gardena/smart-gateway-mt7688/board.c b/board/gardena/smart-gateway-mt7688/board.c
index 838dfc205b..3a1838e44a 100644
--- a/board/gardena/smart-gateway-mt7688/board.c
+++ b/board/gardena/smart-gateway-mt7688/board.c
@@ -4,6 +4,7 @@
*/
#include <common.h>
+#include <led.h>
#include <linux/io.h>
#define MT76XX_AGPIO_CFG 0x1000003c
@@ -18,3 +19,11 @@ int board_early_init_f(void)
return 0;
}
+
+int board_late_init(void)
+{
+ if (IS_ENABLED(CONFIG_LED))
+ led_default_state();
+
+ return 0;
+}
--
2.19.1
next prev parent reply other threads:[~2018-10-09 6:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-09 6:59 [U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 02/14] mips: mt76xx: lowlevel_init.S: Add missing memory controller reset in DDR init Stefan Roese
2018-10-28 19:42 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 03/14] mips: mt76xx: Enable SYS_MIPS_CACHE_INIT_RAM_LOAD for cache init Stefan Roese
2018-10-28 19:02 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 04/14] mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Stefan Roese
2018-10-28 19:43 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 05/14] mips: mt76xx: Add GPIO DT nodes " Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 06/14] mips: mt76xx: Add watchdog DT node " Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 07/14] mips: mt76xx: Kconfig: Add ethernet and GPIO support Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 08/14] mips: mt76xx: Enable watchdog support Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 09/14] mips: mt76xx: gardena-smart-gateway: Configure GPIOs (digital vs analog) Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 10/14] mips: mt76xx: gardena-smart-gateway: Add LEDs to dts Stefan Roese
2018-10-09 6:59 ` Stefan Roese [this message]
2018-10-09 6:59 ` [U-Boot] [PATCH 12/14] mips: mt76xx: gardena-smart-gateway: Misc updates to dts/config/defconfig Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 13/14] mips: mt76xx: linkit-smart-7688: Use ioremap_nocache to get address Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 14/14] mips: mt76xx: linkit-smart-7688: Misc updates to dts/config/defconfig Stefan Roese
2018-10-09 17:38 ` [U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Anatolij Gustschin
2018-10-10 5:57 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181009065916.31977-11-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox