From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 13/14] mips: mt76xx: linkit-smart-7688: Use ioremap_nocache to get address
Date: Tue, 9 Oct 2018 08:59:15 +0200 [thread overview]
Message-ID: <20181009065916.31977-13-sr@denx.de> (raw)
In-Reply-To: <20181009065916.31977-1-sr@denx.de>
Use the correct function to get the uncached address to access the SoC
registers.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
---
board/seeed/linkit-smart-7688/board.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/board/seeed/linkit-smart-7688/board.c b/board/seeed/linkit-smart-7688/board.c
index a28abc00b8..d3d3d50c2c 100644
--- a/board/seeed/linkit-smart-7688/board.c
+++ b/board/seeed/linkit-smart-7688/board.c
@@ -6,12 +6,15 @@
#include <common.h>
#include <asm/io.h>
-#define MT76XX_GPIO1_MODE 0xb0000060
+#define MT76XX_GPIO1_MODE 0x10000060
void board_debug_uart_init(void)
{
+ void __iomem *gpio_mode;
+
/* Select UART2 mode instead of GPIO mode (default) */
- clrbits_le32((void __iomem *)MT76XX_GPIO1_MODE, GENMASK(27, 26));
+ gpio_mode = ioremap_nocache(MT76XX_GPIO1_MODE, 0x100);
+ clrbits_le32(gpio_mode, GENMASK(27, 26));
}
int board_early_init_f(void)
--
2.19.1
next prev parent reply other threads:[~2018-10-09 6:59 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-09 6:59 [U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 02/14] mips: mt76xx: lowlevel_init.S: Add missing memory controller reset in DDR init Stefan Roese
2018-10-28 19:42 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 03/14] mips: mt76xx: Enable SYS_MIPS_CACHE_INIT_RAM_LOAD for cache init Stefan Roese
2018-10-28 19:02 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 04/14] mips: mt76xx: Add ethernet DT node to mt7628a.dtsi Stefan Roese
2018-10-28 19:43 ` Daniel Schwierzeck
2018-10-09 6:59 ` [U-Boot] [PATCH 05/14] mips: mt76xx: Add GPIO DT nodes " Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 06/14] mips: mt76xx: Add watchdog DT node " Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 07/14] mips: mt76xx: Kconfig: Add ethernet and GPIO support Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 08/14] mips: mt76xx: Enable watchdog support Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 09/14] mips: mt76xx: gardena-smart-gateway: Configure GPIOs (digital vs analog) Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 10/14] mips: mt76xx: gardena-smart-gateway: Add LEDs to dts Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 11/14] mips: mt76xx: gardena-smart-gateway: Add board_late_init() to set LED def state Stefan Roese
2018-10-09 6:59 ` [U-Boot] [PATCH 12/14] mips: mt76xx: gardena-smart-gateway: Misc updates to dts/config/defconfig Stefan Roese
2018-10-09 6:59 ` Stefan Roese [this message]
2018-10-09 6:59 ` [U-Boot] [PATCH 14/14] mips: mt76xx: linkit-smart-7688: " Stefan Roese
2018-10-09 17:38 ` [U-Boot] [PATCH 01/14] mips: Add in_le32(), out_le32() etc IO accessor functions Anatolij Gustschin
2018-10-10 5:57 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181009065916.31977-13-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox