From mboxrd@z Thu Jan 1 00:00:00 1970 From: Angelo Dureghello Date: Tue, 9 Oct 2018 23:43:04 +0200 Subject: [U-Boot] [PATCH v2 02/11] drivers: spi: cf_spi: add Kconfig option In-Reply-To: <20181009214313.27034-1-angelo@sysam.it> References: <20181009214313.27034-1-angelo@sysam.it> Message-ID: <20181009214313.27034-3-angelo@sysam.it> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Angelo Dureghello --- Changes for v2: - new patch --- drivers/spi/Kconfig | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 196767a3f6..6340453870 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -87,6 +87,12 @@ config CADENCE_QSPI used to access the SPI NOR flash on platforms embedding this Cadence IP core. +config CF_SPI + bool "ColdFire SPI driver" + help + Enable the ColdFire SPI driver. This driver can be used on + some m68k SoCs. + config DESIGNWARE_SPI bool "Designware SPI driver" help @@ -259,18 +265,18 @@ config ZYNQMP_GQSPI endif # if DM_SPI -config SOFT_SPI - bool "Soft SPI driver" - help - Enable Soft SPI driver. This driver is to use GPIO simulate - the SPI protocol. - config CF_SPI bool "ColdFire SPI driver" help Enable the ColdFire SPI driver. This driver can be used on some m68k SoCs. +config SOFT_SPI + bool "Soft SPI driver" + help + Enable Soft SPI driver. This driver is to use GPIO simulate + the SPI protocol. + config FSL_ESPI bool "Freescale eSPI driver" help -- 2.19.1