[U-Boot] [PATCH v3 0/8] Improvements for the dwc3_generic driver

[Lukasz Majewski <lukma@denx.de>]

Hi Jean-Jacques,

> Hi Lukasz,
> 
> gentle ping on the status on this series.

Do we have tested by from somebody from RockChip community?

> 
> JJ
> 
> 
> On 09/10/2018 16:29, Loic Devulder wrote:
> >
> > On 9/25/18 11:03 AM, Jean-Jacques Hiblot wrote:  
> >> This series aims at bringing improvements to the dwc3_generic
> >> driver so that it can be used by most of the platforms using the
> >> dwc3 controller.
> >>
> >> I tested this on with DRA7 and AM57x platforms for both Peripheral
> >> and Host operations. The code to enable DM USB host & dev support
> >> for those platforms will be submitted in a separate series.
> >>
> >> Michal Simek has tested this series:
> >> " I have tested it on zcu100 with usb stick, usb to ethernet
> >> converter and also dfu.
> >> Tested-by: Michal Simek <michal.simek@xilinx.com>"
> >>  
> > Tested-by: Loic Devulder <ldevulder@suse.de>
> >
> > I tested this series of patches on Khadas VIM as well as
> > Libretech-cc board and it resolved this issue ("USB0:
> > "Synchronous Abort" handler, esr 0x96000210") I had on both cards
> > (I think on all s905x Amlogic SBC)! 
> >> Enhancements:
> >> - use separate Kconfig option for DM USB Periphal and DM USB Host.
> >> This allow platforms to keep their non-DM USB peripheral code and
> >> use the DM USB host.
> >> - fixes the bind/probe confusion in dwc3_generic. The probe is
> >> done when the USB device is first needed.
> >> - handles PHYs when in the peripheral mode. The code to handle the
> >> PHYs is shared with the host side
> >> - handles clock and reset
> >> - bind host controller to the more generic driver 'xhci-dwc3'
> >>
> >>
> >> Changes in v3:
> >> - fixes bug dwc3_setup_phy(): the phy arrays wasn't returned. This
> >> was visible only when the device is removed.
> >> - Stub the DWC3 PHY operations if CONFIG_IS_ENABLED(PHY) is false.
> >>    This fixes all build issues but one (evb-rk3328).
> >> - Fix build issue with evb-rk3328 by enabling CONFIG_USB_DWC3.
> >> This has little impact on the footprint and should not break the
> >> runtime as the xhci-rockchip driver has its own probe function.
> >>    Nevertheless this was !!! NOT TESTED !!! by lack of hw
> >>
> >> Changes in v2:
> >> - Updated commit log
> >> - Fixed typo in thordown.c
> >> - select DM_USB_DEV by default for zynqmp platforms
> >>
> >> Jean-Jacques Hiblot (8):
> >>    usb: gadget: Do not call board_usb_xxx() directly in USB gadget
> >>      drivers
> >>    usb: introduce a separate config option for DM USB device
> >>    usb: udc: implement DM versions of
> >>      usb_gadget_initialize()/_release()/_handle_interrupt()
> >>    dwc3_generic: do not probe the USB device driver when it's bound
> >>    dwc3: move phy operation to core.c
> >>    configs: evb-rk3328: Enable CONFIG_USB_DWC3
> >>    dwc3-generic: Handle the PHYs, the clocks and the reset lines
> >>    dwc3-generic: Add select_dr_mode operation
> >>
> >>   arch/arm/Kconfig                  |   2 +
> >>   cmd/fastboot.c                    |   4 +-
> >>   cmd/rockusb.c                     |   4 +-
> >>   cmd/thordown.c                    |   4 +-
> >>   cmd/usb_gadget_sdp.c              |   4 +-
> >>   cmd/usb_mass_storage.c            |   4 +-
> >>   common/dfu.c                      |   6 +-
> >>   configs/evb-rk3328_defconfig      |   1 +
> >>   drivers/usb/Kconfig               |   6 ++
> >>   drivers/usb/dwc3/Kconfig          |   7 +-
> >>   drivers/usb/dwc3/core.c           |  89 +++++++++++++++-
> >>   drivers/usb/dwc3/dwc3-generic.c   | 207
> >> +++++++++++++++++++++++++++++---------
> >> drivers/usb/dwc3/ep0.c            |   1 -
> >> drivers/usb/gadget/ether.c        |  38 +------
> >> drivers/usb/gadget/udc/udc-core.c |  44 +++++++-
> >> drivers/usb/host/xhci-dwc3.c      |  95 ++---------------
> >> include/dwc3-uboot.h              |  19 ++++
> >> include/linux/usb/gadget.h        |  18 ++++ 18 files changed, 367
> >> insertions(+), 186 deletions(-) 
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181022/8491e11d/attachment.sig>