[U-Boot] [PATCH] arm: socfpga: Fix bootcounter located at the end of internal SRAM

[Stefan Roese <sr@denx.de>]

Commit 768f23dc8ae3 ("ARM: socfpga: Put stack at the end of SRAM") broke
those socfpga boards that keep the bootcounter at the end of the
internal SRAM as the bootcounter needs 8 bytes by default and thus the
very first SPL call to board_init_f_alloc_reserve overwrites the
bootcounter.

This patch allows to move the initial stack pointer down a bit by
checking if CONFIG_SYS_BOOTCOUNT_ADDR is located in the internal SRAM
area and then using this address as location for the start of the
stack pointer.

No new macros / defines are added by this approach.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
---
 include/configs/socfpga_common.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 2330143cf1..bd8f5c8c41 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -31,8 +31,21 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFE00000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x40000 /* 256KB */
 #endif
+
+/*
+ * Some boards (e.g. socfpga_sr1500) use 8 bytes at the end of the internal
+ * SRAM as bootcounter storage. Make sure to not put the stack directly
+ * at this address to not overwrite the bootcounter by checking, if the
+ * bootcounter address is located in the internal SRAM.
+ */
+#if ((CONFIG_SYS_BOOTCOUNT_ADDR > CONFIG_SYS_INIT_RAM_ADDR) &&	\
+     (CONFIG_SYS_BOOTCOUNT_ADDR < (CONFIG_SYS_INIT_RAM_ADDR +	\
+				   CONFIG_SYS_INIT_RAM_SIZE)))
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_BOOTCOUNT_ADDR
+#else
 #define CONFIG_SYS_INIT_SP_ADDR			\
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
+#endif
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
-- 
2.19.1