From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-sunxi/master
Date: Wed, 14 Nov 2018 00:49:45 +0530 [thread overview]
Message-ID: <20181113191945.23286-1-jagan@amarulasolutions.com> (raw)
Hi Tom,
Please pull this PR.
thanks,
Jagan.
The following changes since commit 454cf76184c65426b68033a23da086e73663f2fc:
Prepare v2018.11-rc3 (2018-10-29 16:04:26 -0400)
are available in the Git repository at:
git://git.denx.de/u-boot-sunxi.git master
for you to fetch changes up to 7d121a8ea4e0dbf0d7e105b57c3dbd7d8bd2e729:
sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD (2018-11-13 22:17:06 +0530)
----------------------------------------------------------------
Andre Przywara (4):
sunxi: A64: Update .dts/.dtsi files
sunxi: A64: Re-add syscon to DT node
sunxi: H3/H5: Update .dts files
sunxi: A64: Add Pine64-LTS board
Icenowy Zheng (1):
sunxi: use 6MHz PLL_VIDEO step for DE2 for higher resolution LCD
Jagan Teki (2):
arm64: allwinner: h6: Add common orangepi nodes into dtsi
board: allwinner: sun50i-h6: Add Orangepi Lite2 support
Jun Nie (1):
sunxi: add support for Banana Pi M2 Zero board
Marek Vasut (1):
sunxi: Imply fitImage support
Vasily Khoruzhick (4):
mmc: sunxi: add support for automatic delay calibration
dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing
sun50i: A64: add support for R_I2C controller
sunxi: DT: add support for Pinebook
arch/arm/Kconfig | 1 +
arch/arm/dts/Makefile | 3 +
arch/arm/dts/sun50i-a64-amarula-relic.dts | 168 ++++++++++++-
arch/arm/dts/sun50i-a64-bananapi-m64.dts | 34 ++-
arch/arm/dts/sun50i-a64-nanopi-a64.dts | 89 ++++++-
arch/arm/dts/sun50i-a64-olinuxino.dts | 103 +++++++-
arch/arm/dts/sun50i-a64-orangepi-win.dts | 179 +++++++++++++-
arch/arm/dts/sun50i-a64-pine64-lts.dts | 13 +
arch/arm/dts/sun50i-a64-pine64.dts | 32 ++-
arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 ++
arch/arm/dts/sun50i-a64-pinebook.dts | 294 ++++++++++++++++++++++
arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 32 ++-
arch/arm/dts/sun50i-a64-sopine.dtsi | 15 ++
arch/arm/dts/sun50i-a64.dtsi | 312 ++++++++++++++++++++++--
arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 12 +
arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 2 -
arch/arm/dts/sun50i-h6-orangepi-lite2.dts | 11 +
arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 140 +----------
arch/arm/dts/sun50i-h6-orangepi.dtsi | 150 ++++++++++++
arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 121 +++++++++
arch/arm/dts/sun8i-h3.dtsi | 31 +++
arch/arm/dts/sunxi-h3-h5.dtsi | 2 -
arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
arch/arm/include/asm/arch-sunxi/mmc.h | 6 +-
arch/arm/mach-sunxi/Kconfig | 1 +
arch/arm/mach-sunxi/clock_sun6i.c | 4 +
board/sunxi/MAINTAINERS | 10 +
board/sunxi/board.c | 6 +
configs/bananapi_m2_zero_defconfig | 13 +
configs/orangepi_lite2_defconfig | 12 +
configs/pine64-lts_defconfig | 19 ++
configs/pinebook_defconfig | 22 ++
drivers/mmc/sunxi_mmc.c | 21 +-
drivers/video/bridge/video-bridge-uclass.c | 16 +-
drivers/video/sunxi/lcdc.c | 22 +-
35 files changed, 1710 insertions(+), 202 deletions(-)
create mode 100644 arch/arm/dts/sun50i-a64-pine64-lts.dts
create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
create mode 100644 arch/arm/dts/sun50i-h6-orangepi-lite2.dts
create mode 100644 arch/arm/dts/sun50i-h6-orangepi.dtsi
create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
create mode 100644 configs/bananapi_m2_zero_defconfig
create mode 100644 configs/orangepi_lite2_defconfig
create mode 100644 configs/pine64-lts_defconfig
create mode 100644 configs/pinebook_defconfig
next reply other threads:[~2018-11-13 19:19 UTC|newest]
Thread overview: 125+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-13 19:19 Jagan Teki [this message]
2018-11-13 19:42 ` [U-Boot] Pull request: u-boot-sunxi/master Tom Rini
2018-11-13 20:05 ` Jagan Teki
2018-11-15 21:04 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-10-26 17:48 Jagan Teki
2019-10-30 17:01 ` Tom Rini
2019-07-16 14:59 Jagan Teki
2019-07-17 12:27 ` Tom Rini
2019-05-20 17:15 Jagan Teki
2019-05-21 15:44 ` Tom Rini
2019-04-27 16:17 Jagan Teki
2019-04-27 21:46 ` Tom Rini
2019-04-29 17:14 ` Jagan Teki
2019-04-17 12:27 Jagan Teki
2019-04-18 16:20 ` Tom Rini
2019-04-12 13:04 Jagan Teki
2019-04-13 3:41 ` Tom Rini
2019-04-01 16:30 Jagan Teki
2019-04-01 19:55 ` Tom Rini
2019-03-11 17:29 Jagan Teki
2019-03-12 14:55 ` Tom Rini
2019-02-28 19:08 Jagan Teki
2019-02-28 23:55 ` Tom Rini
2019-02-14 17:20 Jagan Teki
2019-02-16 1:09 ` Tom Rini
2019-01-30 16:26 Jagan Teki
2019-01-31 2:42 ` Tom Rini
2019-01-24 20:14 Jagan Teki
2019-01-25 15:17 ` Tom Rini
2019-01-10 9:20 Jagan Teki
2019-01-10 23:18 ` Tom Rini
2019-01-01 19:22 Jagan Teki
2019-01-02 1:02 ` Tom Rini
2018-12-07 20:54 Jagan Teki
2018-12-08 13:49 ` Tom Rini
2018-11-26 18:27 Jagan Teki
2018-11-27 3:12 ` Tom Rini
2018-10-26 15:00 Jagan Teki
2018-10-26 17:08 ` Tom Rini
2018-10-12 6:16 Jagan Teki
2018-10-15 12:41 ` Tom Rini
2018-09-28 16:44 Jagan Teki
2018-09-30 2:27 ` Tom Rini
2018-08-24 8:50 Jagan Teki
2018-08-25 13:16 ` Tom Rini
2018-08-20 12:44 Jagan Teki
2018-08-20 22:11 ` Tom Rini
2018-07-31 18:11 Jagan Teki
2018-08-01 11:13 ` Tom Rini
2018-08-01 11:47 ` Jagan Teki
2018-08-01 12:43 ` Chen-Yu Tsai
2018-08-01 12:55 ` Tom Rini
2018-08-01 12:58 ` Chen-Yu Tsai
2018-08-01 13:02 ` Tom Rini
2018-08-02 9:27 ` Jagan Teki
2018-08-02 11:13 ` Tom Rini
2018-08-04 17:48 ` Jagan Teki
2018-08-04 17:52 ` Icenowy Zheng
2018-08-04 18:34 ` Icenowy Zheng
2018-08-04 18:51 ` Tom Rini
2018-08-04 18:52 ` Icenowy Zheng
2018-08-04 18:58 ` Icenowy Zheng
2018-08-04 20:11 ` Tom Rini
2018-08-05 11:59 ` Tom Rini
2018-07-17 15:45 Jagan Teki
2018-07-18 0:30 ` Tom Rini
2018-07-03 16:39 Jagan Teki
2018-07-04 16:28 ` Tom Rini
2018-06-04 12:43 Jagan Teki
2018-06-04 15:09 ` Tom Rini
2018-05-09 11:03 Jagan Teki
2018-05-10 11:16 ` Tom Rini
2018-04-27 13:02 Jagan Teki
2018-04-29 21:05 ` Tom Rini
2018-04-30 10:39 ` Jagan Teki
2018-04-30 16:15 ` Tom Rini
2018-04-04 8:55 Jagan Teki
2018-04-05 23:39 ` Tom Rini
2018-03-19 20:00 Jagan Teki
2018-03-20 0:09 ` Tom Rini
2018-03-14 14:05 Jagan Teki
2018-03-15 12:26 ` Tom Rini
2018-01-26 14:35 Jagan Teki
2018-01-26 21:00 ` Tom Rini
2018-01-11 19:02 Jagan Teki
2018-01-12 12:18 ` Tom Rini
2017-12-19 11:47 Jagan Teki
2017-12-19 20:44 ` Tom Rini
2017-11-10 14:07 Jagan Teki
2017-11-10 15:28 ` Tom Rini
2017-11-09 11:45 Jagan Teki
2017-11-10 3:20 ` Tom Rini
2017-09-01 17:10 Jagan Teki
2017-09-01 18:02 ` Tom Rini
2017-08-29 7:27 Jagan Teki
2017-09-01 16:42 ` Tom Rini
2017-09-01 16:48 ` Jagan Teki
2017-08-16 13:11 Jagan Teki
2017-08-17 1:17 ` Tom Rini
2017-06-16 16:24 Jagan Teki
2017-06-16 17:13 ` Siarhei Siamashka
2017-06-16 19:11 ` Jagan Teki
2017-06-20 2:53 ` Jagan Teki
2017-06-20 2:54 ` Tom Rini
2017-06-01 13:43 [U-Boot] Pull Request: u-boot-sunxi/master Jagan Teki
2017-06-04 17:11 ` Tom Rini
2017-05-22 10:03 [U-Boot] Pull request: u-boot-sunxi/master Jagan Teki
2017-05-23 0:18 ` Tom Rini
2017-05-08 16:12 Jagan Teki
2017-05-09 0:12 ` Tom Rini
2017-04-25 18:56 Jagan Teki
2017-04-26 19:16 ` Tom Rini
2017-04-07 17:52 Jagan Teki
2017-04-09 1:16 ` Tom Rini
2017-02-27 14:21 Jagan Teki
2017-02-27 14:56 ` Tom Rini
2017-02-28 10:20 ` Andre Przywara
2017-01-15 17:27 Jagan Teki
2017-01-16 4:01 ` Tom Rini
2017-01-04 16:36 Jagan Teki
2017-01-04 16:41 ` Tom Rini
2017-01-10 23:14 ` Tom Rini
2016-12-23 23:33 Jagan Teki
2016-12-26 13:32 ` Tom Rini
2016-12-27 22:54 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181113191945.23286-1-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox