[U-Boot] i.MX needs prior to DM conversion?

[Wolfgang Denk <wd@denx.de>]

Dear Stefano,

In message <afb5732c-bc32-c5a9-ecce-b71bdc72032b@denx.de> you wrote:
> 
> > and drivers/ata/dwc_ahsata.c
> 
> Right.
> 
> > need
> > conversion.  Is anyone able to start on either of these soon?  Thanks!
> 
> This depends on the status of my current projects - I have not at the
> moment a project that allows me to work on these topics, so I guess I
> cannot be active (very) soon. But things change steadily, who knows...

Woul that not be primarily a task for the maintainers of the boards
that are actually using this driver?  I can see the following
references in the sources:

board/compulab/cm_fx6/cm_fx6.c:#ifdef CONFIG_DWC_AHSATA
board/tbs/tbs2910/tbs2910.c:#ifdef CONFIG_DWC_AHSATA
configs/apalis_imx6_defconfig:CONFIG_DWC_AHSATA=y
configs/apalis_imx6_nospl_com_defconfig:CONFIG_DWC_AHSATA=y
configs/apalis_imx6_nospl_it_defconfig:CONFIG_DWC_AHSATA=y
configs/cgtqmx6eval_defconfig:CONFIG_DWC_AHSATA=y
configs/cm_fx6_defconfig:CONFIG_DWC_AHSATA=y
configs/dh_imx6_defconfig:CONFIG_DWC_AHSATA=y
configs/dms-ba16-1g_defconfig:CONFIG_DWC_AHSATA=y
configs/dms-ba16_defconfig:CONFIG_DWC_AHSATA=y
configs/gwventana_emmc_defconfig:CONFIG_DWC_AHSATA=y
configs/gwventana_gw5904_defconfig:CONFIG_DWC_AHSATA=y
configs/gwventana_nand_defconfig:CONFIG_DWC_AHSATA=y
configs/mx53loco_defconfig:CONFIG_DWC_AHSATA=y
configs/mx6cuboxi_defconfig:CONFIG_DWC_AHSATA=y
configs/mx6qsabrelite_defconfig:CONFIG_DWC_AHSATA=y
configs/nitrogen6q2g_defconfig:CONFIG_DWC_AHSATA=y
configs/nitrogen6q_defconfig:CONFIG_DWC_AHSATA=y
configs/novena_defconfig:CONFIG_DWC_AHSATA=y
configs/ot1200_defconfig:CONFIG_DWC_AHSATA=y
configs/ot1200_spl_defconfig:CONFIG_DWC_AHSATA=y
configs/tbs2910_defconfig:CONFIG_DWC_AHSATA=y
configs/udoo_defconfig:CONFIG_DWC_AHSATA=y
configs/wandboard_defconfig:CONFIG_DWC_AHSATA=y

This gives this list of board maintainers:

	Nikita Kiryanov <nikita@compulab.co.il>
	Soeren Moch <smoch@web.de>
	Max Krummenacher <max.krummenacher@toradex.com>
	Otavio Salvador <otavio@ossystems.com.br>
	Andreas Geisreiter <ageisreiter@dh-electronics.de>
	Ludwig Zenz <lzenz@dh-electronics.de>
	Akshay Bhat <akshaybhat@timesys.com>
	Ken Lin <Ken.Lin@advantech.com.tw>
	Tim Harvey <tharvey@gateworks.com>
	Jason Liu <jason.hui.liu@nxp.com>
	Fabio Estevam <fabio.estevam@nxp.com>
	Troy Kisky <troy.kisky@boundarydevices.com>
	Marek Vasut <marex@denx.de>
	Christian Gmeiner <christian.gmeiner@gmail.com>
	Soeren Moch <smoch@web.de>
	
?


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
                  Nail here --X-- for new monitor.