From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Thu, 29 Nov 2018 10:25:48 -0500 Subject: [U-Boot] [PATCH] dts: am335x-pdu001: Fix polarity of card detection input In-Reply-To: <20181129124506.16135-1-fb@ltec.ch> References: <20181129124506.16135-1-fb@ltec.ch> Message-ID: <20181129152548.GH5048@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, Nov 29, 2018 at 01:45:06PM +0100, Felix Brack wrote: > When a micro SD card is inserted in the PDU001 card cage, the card > detection switch is opened and the corresponding GPIO input is driven > by a pull-up. Hence change the active level of the card detection > input from low to high. > > Signed-off-by: Felix Brack > --- > > arch/arm/dts/am335x-pdu001.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/dts/am335x-pdu001.dts b/arch/arm/dts/am335x-pdu001.dts > index 121e2c6207..3a5e952663 100644 > --- a/arch/arm/dts/am335x-pdu001.dts > +++ b/arch/arm/dts/am335x-pdu001.dts > @@ -576,7 +576,7 @@ > bus-width = <4>; > pinctrl-names = "default"; > pinctrl-0 = <&mmc2_pins>; > - cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; > + cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; > }; > > &sham { Is this in upstream Linux as well? If so what tag/hash? Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: