From: Andrew F. Davis <afd@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/7] spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU
Date: Fri, 30 Nov 2018 11:11:17 -0600 [thread overview]
Message-ID: <20181130171123.23009-2-afd@ti.com> (raw)
In-Reply-To: <20181130171123.23009-1-afd@ti.com>
The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same
meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT
to allow for cleaner use in code.
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/cpu/armv8/zynqmp/spl.c | 2 +-
arch/arm/mach-omap2/boot-common.c | 2 +-
common/Makefile | 4 ++--
common/spl/Kconfig | 6 +++---
common/spl/Makefile | 2 +-
common/spl/spl_ram.c | 4 ++--
drivers/Makefile | 2 +-
drivers/usb/gadget/Makefile | 2 +-
include/configs/dra7xx_evm.h | 2 +-
include/configs/xilinx_zynqmp.h | 4 ++--
10 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c b/arch/arm/cpu/armv8/zynqmp/spl.c
index 01f31d0f0e..fb3955c93f 100644
--- a/arch/arm/cpu/armv8/zynqmp/spl.c
+++ b/arch/arm/cpu/armv8/zynqmp/spl.c
@@ -93,7 +93,7 @@ u32 spl_boot_device(void)
case EMMC_MODE:
return BOOT_DEVICE_MMC1;
#endif
-#ifdef CONFIG_SPL_DFU_SUPPORT
+#ifdef CONFIG_SPL_DFU
case USB_MODE:
return BOOT_DEVICE_DFU;
#endif
diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c
index 176d4f67cb..2db19227b9 100644
--- a/arch/arm/mach-omap2/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
@@ -108,7 +108,7 @@ void save_omap_boot_params(void)
sys_boot_device = 1;
break;
#endif
-#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU)
case BOOT_DEVICE_DFU:
sys_boot_device = 1;
break;
diff --git a/common/Makefile b/common/Makefile
index 65d89dc62d..69cec69608 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -64,10 +64,10 @@ obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o
obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o
ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_DFU_SUPPORT
+ifdef CONFIG_SPL_DFU
obj-$(CONFIG_DFU_OVER_USB) += dfu.o
endif
-obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o
+obj-$(CONFIG_SPL_DFU) += cli_hush.o
obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
obj-$(CONFIG_TPL_HASH_SUPPORT) += hash.o
obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 0ddbffc7d1..8dec080deb 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -790,7 +790,7 @@ config SPL_USB_ETHER
since the network stack uses a number of environment variables.
See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT.
-config SPL_DFU_SUPPORT
+config SPL_DFU
bool "Support DFU (Device Firmware Upgrade)"
select SPL_HASH_SUPPORT
select SPL_DFU_NO_RESET
@@ -805,11 +805,11 @@ config SPL_DFU_SUPPORT
choice
bool "DFU device selection"
- depends on SPL_DFU_SUPPORT
+ depends on SPL_DFU
config SPL_DFU_RAM
bool "RAM device"
- depends on SPL_DFU_SUPPORT && SPL_RAM_SUPPORT
+ depends on SPL_DFU && SPL_RAM_SUPPORT
help
select RAM/DDR memory device for loading binary images
(u-boot/kernel) to the selected device partition using
diff --git a/common/spl/Makefile b/common/spl/Makefile
index a130a5be4b..6f8d7599ae 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o
obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o
obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
-obj-$(CONFIG_$(SPL_TPL_)DFU_SUPPORT) += spl_dfu.o
+obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o
obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o
obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o
obj-$(CONFIG_$(SPL_TPL_)USB_SDP_SUPPORT) += spl_sdp.o
diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c
index 5fcc3b1504..954e91a004 100644
--- a/common/spl/spl_ram.c
+++ b/common/spl/spl_ram.c
@@ -35,7 +35,7 @@ static int spl_ram_load_image(struct spl_image_info *spl_image,
header = (struct image_header *)CONFIG_SPL_LOAD_FIT_ADDRESS;
-#if CONFIG_IS_ENABLED(DFU_SUPPORT)
+#if CONFIG_IS_ENABLED(DFU)
if (bootdev->boot_device == BOOT_DEVICE_DFU)
spl_dfu_cmd(0, "dfu_alt_info_ram", "ram", "0");
#endif
@@ -76,7 +76,7 @@ static int spl_ram_load_image(struct spl_image_info *spl_image,
#if CONFIG_IS_ENABLED(RAM_DEVICE)
SPL_LOAD_IMAGE_METHOD("RAM", 0, BOOT_DEVICE_RAM, spl_ram_load_image);
#endif
-#if CONFIG_IS_ENABLED(DFU_SUPPORT)
+#if CONFIG_IS_ENABLED(DFU)
SPL_LOAD_IMAGE_METHOD("DFU", 0, BOOT_DEVICE_DFU, spl_ram_load_image);
#endif
diff --git a/drivers/Makefile b/drivers/Makefile
index 55de10926e..7fe80b1d72 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -48,7 +48,7 @@ obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
-obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
+obj-$(CONFIG_SPL_DFU) += dfu/
obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index b74c1fdce9..b5bc59eecb 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -8,7 +8,7 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += g_dnl.o
-obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o
+obj-$(CONFIG_SPL_DFU) += f_dfu.o
obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
endif
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 2d8758db75..f36a9c3e08 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -53,7 +53,7 @@
#ifdef CONFIG_SPL_BUILD
#undef CONFIG_CMD_BOOTD
-#ifdef CONFIG_SPL_DFU_SUPPORT
+#ifdef CONFIG_SPL_DFU
#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 0ab32611ce..7a9b06ec4c 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -183,7 +183,7 @@
#endif
/* SPL can't handle all huge variables - define just DFU */
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
#undef CONFIG_EXTRA_ENV_SETTINGS
# define CONFIG_EXTRA_ENV_SETTINGS \
"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
@@ -228,7 +228,7 @@
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
# undef CONFIG_CMD_BOOTD
# define CONFIG_SPL_ENV_SUPPORT
# define CONFIG_SPL_HASH_SUPPORT
--
2.19.1
next prev parent reply other threads:[~2018-11-30 17:11 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-30 17:11 [U-Boot] [PATCH 0/7] Add USB/UART boot to HS DRA7xx/AM57xx Andrew F. Davis
2018-11-30 17:11 ` Andrew F. Davis [this message]
2018-11-30 17:11 ` [U-Boot] [PATCH 2/7] dfu: Make DFU support more SPL friendly Andrew F. Davis
2018-11-30 17:11 ` [U-Boot] [PATCH 3/7] dfu: Remove dependency on HUSH parser in SPL Andrew F. Davis
2018-11-30 17:11 ` [U-Boot] [PATCH 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point Andrew F. Davis
2018-11-30 17:11 ` [U-Boot] [PATCH 5/7] defconfigs: Add config for DRA7xx High Security EVM with UART/USB Boot support Andrew F. Davis
2018-12-03 5:22 ` Lokesh Vutla
2018-11-30 17:11 ` [U-Boot] [PATCH 6/7] defconfigs: Add config for AM57xx " Andrew F. Davis
2018-12-03 5:24 ` Lokesh Vutla
2018-12-04 21:37 ` Andrew F. Davis
2018-12-05 12:42 ` Lokesh Vutla
2018-12-05 17:24 ` Andrew F. Davis
2018-11-30 17:11 ` [U-Boot] [PATCH 7/7] doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI Andrew F. Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181130171123.23009-2-afd@ti.com \
--to=afd@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox