[U-Boot] [PATCH v1 4/4] ARM: vf610: ddrmc: do not write CR79 by default

[Lukasz Majewski <lukma@denx.de>]

Hi Stefan,

> From: Stefan Agner <stefan.agner@toradex.com>
> 
> The current value CTLUPD_AREF(0) is the reset value of the register,
> so there is no need to write a value. If needed, the register can be
> written using board specific CR settings.
> 
> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> ---
> 
>  arch/arm/mach-imx/ddrmc-vf610.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-imx/ddrmc-vf610.c
> b/arch/arm/mach-imx/ddrmc-vf610.c index d121a53898..d4926b5cee 100644
> --- a/arch/arm/mach-imx/ddrmc-vf610.c
> +++ b/arch/arm/mach-imx/ddrmc-vf610.c
> @@ -188,7 +188,6 @@ void ddrmc_ctrl_init_ddr3(struct
> ddr3_jedec_timings const *timings, DDRMC_CR77_SWAP_EN,
> &ddrmr->cr[77]); writel(DDRMC_CR78_Q_FULLNESS(timings->q_fullness) |
>  		   DDRMC_CR78_BUR_ON_FLY_BIT(12), &ddrmr->cr[78]);
> -	writel(DDRMC_CR79_CTLUPD_AREF(0), &ddrmr->cr[79]);
>  
>  	writel(DDRMC_CR82_INT_MASK, &ddrmr->cr[82]);
>  

Reviewed-by: Lukasz Majewski <lukma@denx.de>


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181204/3d9ad9d7/attachment.sig>