[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Stefan Agner]

From: Stefan Agner <stefan.agner@toradex.com>

The current bitmap is a bit larger than necessary, it has a black
border around the Toradex logo. Crop the logo slightly which safes
some space, useful especially on Colibri VFxx.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
---

 tools/logos/toradex.bmp | Bin 24982 -> 23298 bytes
 1 file changed, 0 insertions(+), 0 deletions(-)

diff --git a/tools/logos/toradex.bmp b/tools/logos/toradex.bmp
index 3e2dcf23358dd46fc7b1bb0dae70d3ba985606ee..8b5cb18e8475b3eda72c9f0e821b2aad17bc1bae 100644
GIT binary patch
delta 505
zcmYLEO-oxr6rCd>(HDKjZ>@>Jpis10rD|SMpO}a~;ztZ>#n#YvXDMP^LN{G at Ros~Y
z7ZzGv2rXT;2fM2V{0-tp-MG+&1*NzVD!qwH2j<L~d(J&`XLSefe<B*6D4JJ=_0FZ#
zqA&|eIdVc37wR8om8$e!Zz<*l6?djGE9YG(S~;)!9=&quRG=vfFLUm4-15 at m|9r0G
zmizeCFm60Pec_#Ey3_){ltsV`(*{R;a?MtR!GlVHyVU}jnm+JXtq3Lc0*@L5*6#@X
zZWM?FBG5Uvi_1-;;7M@9V643tT)ro*yB*RRyf5r!m%wIs7(X6Z&}P4>2dpwK^!TCA
z#vApR)u#7*|L~|!Y at L=^>|}#ZB|Th=)POrtDVzOa=q<<Og53sg4CGC*R at M$yfp)Br
zTCNWr4?o94(4CgaqoH;%G%TNcHS!SLa%5g3A at fQ&UylZ%jYNRCF+X@VE-pJ+(CWB8
zDGB)@pZ0ionrZ=CrbK@;9R;^%B+8u4K>wYo&*H6Kdi+g)O1ODE*9`if$Qv)_#k`r8
Tu-(CC?xpL%<TJT_e17>4;b52`

delta 656
zcmXw!ODIHP6vw|?uE!njFhgTzOi3nYyasb;yv8sxo^!iK9tlwv3RzGrG(|QZDZa9j
zB?~JZ+1My$i;az at WKD$CWZ~X(xb^k>&j0++`QLBjQaHR3{E^t<G{Y~D##p(2>lYa7
z)+w+|)TbsGvzX}UqTV=PO%wUG_^qEgSQ8tBeJ!7_i5^I%n~giXW{@^6RYN>W!v46l
zZnTmTwxA%p5v^)Y2)QGZeq#<|oysNFT8OjO0P4s2<a;b2$~I!OkeIL&FCDc1-KiRL
zf{70}efyfocU>k(xMn2%=P%%;Ou?--52dJHO4+QS`l^!nSw-~J;C6l%lwr~5F=qKz
zmy?(Jy*yd_Wjye{4y`=ZDsxrI1-IXU5n+X*mIJivEJ(i7hzuVMUi3JcX#IAJ8&;aF
zsBO3WN1EXwgprVHrN`B`5$D^R(R&&puNHN|Pe+lV at v!3JlZpi4&OG#JQJUH6Lh5}x
zJarfUd2L|nEy26~M84?DfS$fmoLlIpxszBE*3T+sI<+ON_XaQ<ZsTQGzYS9D9-_I)
WVdOzbgrkvqwA_u-FJz9T1ojITOUl0h

-- 
2.19.2

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Lukasz Majewski]

On Thu,  6 Dec 2018 14:53:02 +0100
Stefan Agner <stefan@agner.ch> wrote:

> From: Stefan Agner <stefan.agner@toradex.com>
> 
> The current bitmap is a bit larger than necessary, it has a black
> border around the Toradex logo. Crop the logo slightly which safes
> some space, useful especially on Colibri VFxx.
> 
> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
> ---
> 
>  tools/logos/toradex.bmp | Bin 24982 -> 23298 bytes
>  1 file changed, 0 insertions(+), 0 deletions(-)
> 
> diff --git a/tools/logos/toradex.bmp b/tools/logos/toradex.bmp
> index
> 3e2dcf23358dd46fc7b1bb0dae70d3ba985606ee..8b5cb18e8475b3eda72c9f0e821b2aad17bc1bae
> 100644 GIT binary patch delta 505
> zcmYLEO-oxr6rCd>(HDKjZ>@>Jpis10rD|SMpO}a~;ztZ>#n#YvXDMP^LN{G at Ros~Y
> z7ZzGv2rXT;2fM2V{0-tp-MG+&1*NzVD!qwH2j<L~d(J&`XLSefe<B*6D4JJ=_0FZ#
> zqA&|eIdVc37wR8om8$e!Zz<*l6?djGE9YG(S~;)!9=&quRG=vfFLUm4-15@m|9r0G
> zmizeCFm60Pec_#Ey3_){ltsV`(*{R;a?MtR!GlVHyVU}jnm+JXtq3Lc0*@L5*6#@X
> zZWM?FBG5Uvi_1-;;7M at 9V643tT)ro*yB*RRyf5r!m%wIs7(X6Z&}P4>2dpwK^!TCA
> z#vApR)u#7*|L~|!Y at L=^>|}#ZB|Th=)POrtDVzOa=q<<Og53sg4CGC*R@M$yfp)Br  
> zTCNWr4?o94(4CgaqoH;%G%TNcHS!SLa%5g3A at fQ&UylZ%jYNRCF+X at VE-pJ+(CWB8
> zDGB)@pZ0ionrZ=CrbK@;9R;^%B+8u4K>wYo&*H6Kdi+g)O1ODE*9`if$Qv)_#k`r8  
> Tu-(CC?xpL%<TJT_e17>4;b52`
> 
> delta 656
> zcmXw!ODIHP6vw|?uE!njFhgTzOi3nYyasb;yv8sxo^!iK9tlwv3RzGrG(|QZDZa9j
> zB?~JZ+1My$i;az at WKD$CWZ~X(xb^k>&j0++`QLBjQaHR3{E^t<G{Y~D##p(2>lYa7
> z)+w+|)TbsGvzX}UqTV=PO%wUG_^qEgSQ8tBeJ!7_i5^I%n~giXW{@^6RYN>W!v46l  
> zZnTmTwxA%p5v^)Y2)QGZeq#<|oysNFT8OjO0P4s2<a;b2$~I!OkeIL&FCDc1-KiRL
> zf{70}efyfocU>k(xMn2%=P%%;Ou?--52dJHO4+QS`l^!nSw-~J;C6l%lwr~5F=qKz  
> zmy?(Jy*yd_Wjye{4y`=ZDsxrI1-IXU5n+X*mIJivEJ(i7hzuVMUi3JcX#IAJ8&;aF
> zsBO3WN1EXwgprVHrN`B`5$D^R(R&&puNHN|Pe+lV at v!3JlZpi4&OG#JQJUH6Lh5}x
> zJarfUd2L|nEy26~M84?DfS$fmoLlIpxszBE*3T+sI<+ON_XaQ<ZsTQGzYS9D9-_I)
> WVdOzbgrkvqwA_u-FJz9T1ojITOUl0h
> 

Reviewed-by: Lukasz Majewski <lukma@denx.de>


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181206/30a4c06f/attachment.sig>

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Lukasz Majewski]

Hi Stefan,

> From: Stefan Agner <stefan.agner@toradex.com>
> 
> The current bitmap is a bit larger than necessary, it has a black
> border around the Toradex logo. Crop the logo slightly which safes
> some space, useful especially on Colibri VFxx.

I can confirm that those changes, as well as 

[PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B
[PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
[PATCH v1] fs: fat: dynamically allocate memory for temporary buffer

Reduce the u-boot.vyb binary for colibri_vf, so it is possible to put
more device tree description data to vf.dtsi and hence convert some
vf610 boards to DTS/DM.

Tested-by: Lukasz Majewski <lukma@denx.de>

Thanks Stefan :-)

> 
> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
> ---
> 
>  tools/logos/toradex.bmp | Bin 24982 -> 23298 bytes
>  1 file changed, 0 insertions(+), 0 deletions(-)
> 
> diff --git a/tools/logos/toradex.bmp b/tools/logos/toradex.bmp
> index
> 3e2dcf23358dd46fc7b1bb0dae70d3ba985606ee..8b5cb18e8475b3eda72c9f0e821b2aad17bc1bae
> 100644 GIT binary patch delta 505
> zcmYLEO-oxr6rCd>(HDKjZ>@>Jpis10rD|SMpO}a~;ztZ>#n#YvXDMP^LN{G at Ros~Y
> z7ZzGv2rXT;2fM2V{0-tp-MG+&1*NzVD!qwH2j<L~d(J&`XLSefe<B*6D4JJ=_0FZ#
> zqA&|eIdVc37wR8om8$e!Zz<*l6?djGE9YG(S~;)!9=&quRG=vfFLUm4-15@m|9r0G
> zmizeCFm60Pec_#Ey3_){ltsV`(*{R;a?MtR!GlVHyVU}jnm+JXtq3Lc0*@L5*6#@X
> zZWM?FBG5Uvi_1-;;7M at 9V643tT)ro*yB*RRyf5r!m%wIs7(X6Z&}P4>2dpwK^!TCA
> z#vApR)u#7*|L~|!Y at L=^>|}#ZB|Th=)POrtDVzOa=q<<Og53sg4CGC*R@M$yfp)Br  
> zTCNWr4?o94(4CgaqoH;%G%TNcHS!SLa%5g3A at fQ&UylZ%jYNRCF+X at VE-pJ+(CWB8
> zDGB)@pZ0ionrZ=CrbK@;9R;^%B+8u4K>wYo&*H6Kdi+g)O1ODE*9`if$Qv)_#k`r8  
> Tu-(CC?xpL%<TJT_e17>4;b52`
> 
> delta 656
> zcmXw!ODIHP6vw|?uE!njFhgTzOi3nYyasb;yv8sxo^!iK9tlwv3RzGrG(|QZDZa9j
> zB?~JZ+1My$i;az at WKD$CWZ~X(xb^k>&j0++`QLBjQaHR3{E^t<G{Y~D##p(2>lYa7
> z)+w+|)TbsGvzX}UqTV=PO%wUG_^qEgSQ8tBeJ!7_i5^I%n~giXW{@^6RYN>W!v46l  
> zZnTmTwxA%p5v^)Y2)QGZeq#<|oysNFT8OjO0P4s2<a;b2$~I!OkeIL&FCDc1-KiRL
> zf{70}efyfocU>k(xMn2%=P%%;Ou?--52dJHO4+QS`l^!nSw-~J;C6l%lwr~5F=qKz  
> zmy?(Jy*yd_Wjye{4y`=ZDsxrI1-IXU5n+X*mIJivEJ(i7hzuVMUi3JcX#IAJ8&;aF
> zsBO3WN1EXwgprVHrN`B`5$D^R(R&&puNHN|Pe+lV at v!3JlZpi4&OG#JQJUH6Lh5}x
> zJarfUd2L|nEy26~M84?DfS$fmoLlIpxszBE*3T+sI<+ON_XaQ<ZsTQGzYS9D9-_I)
> WVdOzbgrkvqwA_u-FJz9T1ojITOUl0h
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181208/4d575886/attachment.sig>

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Stefan Agner]

Hi Tom,

On 08.12.2018 17:48, Lukasz Majewski wrote:
> Hi Stefan,
> 
>> From: Stefan Agner <stefan.agner@toradex.com>
>>
>> The current bitmap is a bit larger than necessary, it has a black
>> border around the Toradex logo. Crop the logo slightly which safes
>> some space, useful especially on Colibri VFxx.
> 
> I can confirm that those changes, as well as 
> 
> [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B
> [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
> [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer

I think all of those go directly into your tree?

--
Stefan

> 
> Reduce the u-boot.vyb binary for colibri_vf, so it is possible to put
> more device tree description data to vf.dtsi and hence convert some
> vf610 boards to DTS/DM.
> 
> Tested-by: Lukasz Majewski <lukma@denx.de>
> 
> Thanks Stefan :-)
> 
>>
>> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
>> ---
>>
>>  tools/logos/toradex.bmp | Bin 24982 -> 23298 bytes
>>  1 file changed, 0 insertions(+), 0 deletions(-)
>>
>> diff --git a/tools/logos/toradex.bmp b/tools/logos/toradex.bmp
>> index
>> 3e2dcf23358dd46fc7b1bb0dae70d3ba985606ee..8b5cb18e8475b3eda72c9f0e821b2aad17bc1bae
>> 100644 GIT binary patch delta 505
>> zcmYLEO-oxr6rCd>(HDKjZ>@>Jpis10rD|SMpO}a~;ztZ>#n#YvXDMP^LN{G at Ros~Y
>> z7ZzGv2rXT;2fM2V{0-tp-MG+&1*NzVD!qwH2j<L~d(J&`XLSefe<B*6D4JJ=_0FZ#
>> zqA&|eIdVc37wR8om8$e!Zz<*l6?djGE9YG(S~;)!9=&quRG=vfFLUm4-15@m|9r0G
>> zmizeCFm60Pec_#Ey3_){ltsV`(*{R;a?MtR!GlVHyVU}jnm+JXtq3Lc0*@L5*6#@X
>> zZWM?FBG5Uvi_1-;;7M at 9V643tT)ro*yB*RRyf5r!m%wIs7(X6Z&}P4>2dpwK^!TCA
>> z#vApR)u#7*|L~|!Y at L=^>|}#ZB|Th=)POrtDVzOa=q<<Og53sg4CGC*R@M$yfp)Br
>> zTCNWr4?o94(4CgaqoH;%G%TNcHS!SLa%5g3A at fQ&UylZ%jYNRCF+X at VE-pJ+(CWB8
>> zDGB)@pZ0ionrZ=CrbK@;9R;^%B+8u4K>wYo&*H6Kdi+g)O1ODE*9`if$Qv)_#k`r8
>> Tu-(CC?xpL%<TJT_e17>4;b52`
>>
>> delta 656
>> zcmXw!ODIHP6vw|?uE!njFhgTzOi3nYyasb;yv8sxo^!iK9tlwv3RzGrG(|QZDZa9j
>> zB?~JZ+1My$i;az at WKD$CWZ~X(xb^k>&j0++`QLBjQaHR3{E^t<G{Y~D##p(2>lYa7
>> z)+w+|)TbsGvzX}UqTV=PO%wUG_^qEgSQ8tBeJ!7_i5^I%n~giXW{@^6RYN>W!v46l
>> zZnTmTwxA%p5v^)Y2)QGZeq#<|oysNFT8OjO0P4s2<a;b2$~I!OkeIL&FCDc1-KiRL
>> zf{70}efyfocU>k(xMn2%=P%%;Ou?--52dJHO4+QS`l^!nSw-~J;C6l%lwr~5F=qKz
>> zmy?(Jy*yd_Wjye{4y`=ZDsxrI1-IXU5n+X*mIJivEJ(i7hzuVMUi3JcX#IAJ8&;aF
>> zsBO3WN1EXwgprVHrN`B`5$D^R(R&&puNHN|Pe+lV at v!3JlZpi4&OG#JQJUH6Lh5}x
>> zJarfUd2L|nEy26~M84?DfS$fmoLlIpxszBE*3T+sI<+ON_XaQ<ZsTQGzYS9D9-_I)
>> WVdOzbgrkvqwA_u-FJz9T1ojITOUl0h
>>
> 
> 
> 
> 
> Best regards,
> 
> Lukasz Majewski
> 
> --
> 
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Tom Rini]

On Fri, Dec 14, 2018 at 02:13:46PM +0100, Stefan Agner wrote:
> Hi Tom,
> 
> On 08.12.2018 17:48, Lukasz Majewski wrote:
> > Hi Stefan,
> > 
> >> From: Stefan Agner <stefan.agner@toradex.com>
> >>
> >> The current bitmap is a bit larger than necessary, it has a black
> >> border around the Toradex logo. Crop the logo slightly which safes
> >> some space, useful especially on Colibri VFxx.
> > 
> > I can confirm that those changes, as well as 
> > 
> > [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B
> > [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
> > [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
> 
> I think all of those go directly into your tree?

I had filed vybird stuff off to Stefano for some, hopefully correct
reason.  The FAT change and logo change are me, yes.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181214/389da121/attachment.sig>

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Stefan Agner]

On 14.12.2018 14:20, Tom Rini wrote:
> On Fri, Dec 14, 2018 at 02:13:46PM +0100, Stefan Agner wrote:
>> Hi Tom,
>>
>> On 08.12.2018 17:48, Lukasz Majewski wrote:
>> > Hi Stefan,
>> >
>> >> From: Stefan Agner <stefan.agner@toradex.com>
>> >>
>> >> The current bitmap is a bit larger than necessary, it has a black
>> >> border around the Toradex logo. Crop the logo slightly which safes
>> >> some space, useful especially on Colibri VFxx.
>> >
>> > I can confirm that those changes, as well as
>> >
>> > [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B
>> > [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
>> > [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
>>
>> I think all of those go directly into your tree?
> 
> I had filed vybird stuff off to Stefano for some, hopefully correct
> reason.  The FAT change and logo change are me, yes.

I guess the mtd change is rather global...

Currently board/toradex is not specifically marked to be maintained by
Stefano (we also have Tegra boards). But yeah for Vybrid it probably
makes sense.

--
Stefan

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Tom Rini]

On Fri, Dec 14, 2018 at 02:26:22PM +0100, Stefan Agner wrote:
> On 14.12.2018 14:20, Tom Rini wrote:
> > On Fri, Dec 14, 2018 at 02:13:46PM +0100, Stefan Agner wrote:
> >> Hi Tom,
> >>
> >> On 08.12.2018 17:48, Lukasz Majewski wrote:
> >> > Hi Stefan,
> >> >
> >> >> From: Stefan Agner <stefan.agner@toradex.com>
> >> >>
> >> >> The current bitmap is a bit larger than necessary, it has a black
> >> >> border around the Toradex logo. Crop the logo slightly which safes
> >> >> some space, useful especially on Colibri VFxx.
> >> >
> >> > I can confirm that those changes, as well as
> >> >
> >> > [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B
> >> > [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
> >> > [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
> >>
> >> I think all of those go directly into your tree?
> > 
> > I had filed vybird stuff off to Stefano for some, hopefully correct
> > reason.  The FAT change and logo change are me, yes.
> 
> I guess the mtd change is rather global...

Ah right.  Maybe I gave it to myself?  I know I assigned it in
patchwork.

> Currently board/toradex is not specifically marked to be maintained by
> Stefano (we also have Tegra boards). But yeah for Vybrid it probably
> makes sense.

Right, I try and assign boards based on the underlying SoC correctly but
do also from time to time get them wrong (there's a handful of "wait
that's not TI-based that's iMX-based, oops" I catch myself on).

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181214/50a6aac6/attachment.sig>

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Stefano Babic]

On 14/12/18 14:30, Tom Rini wrote:
> On Fri, Dec 14, 2018 at 02:26:22PM +0100, Stefan Agner wrote:
>> On 14.12.2018 14:20, Tom Rini wrote:
>>> On Fri, Dec 14, 2018 at 02:13:46PM +0100, Stefan Agner wrote:
>>>> Hi Tom,
>>>>
>>>> On 08.12.2018 17:48, Lukasz Majewski wrote:
>>>>> Hi Stefan,
>>>>>
>>>>>> From: Stefan Agner <stefan.agner@toradex.com>
>>>>>>
>>>>>> The current bitmap is a bit larger than necessary, it has a black
>>>>>> border around the Toradex logo. Crop the logo slightly which safes
>>>>>> some space, useful especially on Colibri VFxx.
>>>>>
>>>>> I can confirm that those changes, as well as
>>>>>
>>>>> [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B
>>>>> [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
>>>>> [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
>>>>
>>>> I think all of those go directly into your tree?
>>>
>>> I had filed vybird stuff off to Stefano for some, hopefully correct
>>> reason.  The FAT change and logo change are me, yes.
>>
>> I guess the mtd change is rather global...
> 
> Ah right.  Maybe I gave it to myself?  I know I assigned it in
> patchwork.
> 
>> Currently board/toradex is not specifically marked to be maintained by
>> Stefano (we also have Tegra boards). But yeah for Vybrid it probably
>> makes sense.
> 

Yes, I saw your patches, I will picked them up after current PR (sent
now) will be merged.

> Right, I try and assign boards based on the underlying SoC correctly but
> do also from time to time get them wrong (there's a handful of "wait
> that's not TI-based that's iMX-based, oops" I catch myself on).
> 

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Stefan Agner]

Hi Stefano,

On 14.12.2018 14:40, Stefano Babic wrote:
> On 14/12/18 14:30, Tom Rini wrote:
>> On Fri, Dec 14, 2018 at 02:26:22PM +0100, Stefan Agner wrote:
>>> On 14.12.2018 14:20, Tom Rini wrote:
>>>> On Fri, Dec 14, 2018 at 02:13:46PM +0100, Stefan Agner wrote:
>>>>> Hi Tom,
>>>>>
>>>>> On 08.12.2018 17:48, Lukasz Majewski wrote:
>>>>>> Hi Stefan,
>>>>>>
>>>>>>> From: Stefan Agner <stefan.agner@toradex.com>
>>>>>>>
>>>>>>> The current bitmap is a bit larger than necessary, it has a black
>>>>>>> border around the Toradex logo. Crop the logo slightly which safes
>>>>>>> some space, useful especially on Colibri VFxx.
>>>>>>
>>>>>> I can confirm that those changes, as well as
>>>>>>
>>>>>> [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B
>>>>>> [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
>>>>>> [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
>>>>>
>>>>> I think all of those go directly into your tree?
>>>>
>>>> I had filed vybird stuff off to Stefano for some, hopefully correct
>>>> reason.  The FAT change and logo change are me, yes.
>>>
>>> I guess the mtd change is rather global...
>>
>> Ah right.  Maybe I gave it to myself?  I know I assigned it in
>> patchwork.
>>
>>> Currently board/toradex is not specifically marked to be maintained by
>>> Stefano (we also have Tegra boards). But yeah for Vybrid it probably
>>> makes sense.
>>
> 
> Yes, I saw your patches, I will picked them up after current PR (sent
> now) will be merged.

This still did not make it. Can it still be considered for the next
release?

There is also:
- board: toradex: colibri_vf: unset NFS and LOADS/B
- ARM: vf610: ddrmc: program Dummy DDRBYTE1/2
- ddr: vybrid: various fixes (patchset)

--
Stefan


> 
>> Right, I try and assign boards based on the underlying SoC correctly but
>> do also from time to time get them wrong (there's a handful of "wait
>> that's not TI-based that's iMX-based, oops" I catch myself on).
>>
> 
> Regards,
> Stefano

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Stefano Babic]

Hi Stefan, Lukasz,

On 04/01/19 16:05, Stefan Agner wrote:
> Hi Stefano,
> 
> On 14.12.2018 14:40, Stefano Babic wrote:
>> On 14/12/18 14:30, Tom Rini wrote:
>>> On Fri, Dec 14, 2018 at 02:26:22PM +0100, Stefan Agner wrote:
>>>> On 14.12.2018 14:20, Tom Rini wrote:
>>>>> On Fri, Dec 14, 2018 at 02:13:46PM +0100, Stefan Agner wrote:
>>>>>> Hi Tom,
>>>>>>
>>>>>> On 08.12.2018 17:48, Lukasz Majewski wrote:
>>>>>>> Hi Stefan,
>>>>>>>
>>>>>>>> From: Stefan Agner <stefan.agner@toradex.com>
>>>>>>>>
>>>>>>>> The current bitmap is a bit larger than necessary, it has a black
>>>>>>>> border around the Toradex logo. Crop the logo slightly which safes
>>>>>>>> some space, useful especially on Colibri VFxx.
>>>>>>>
>>>>>>> I can confirm that those changes, as well as
>>>>>>>
>>>>>>> [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B

You're right, this was slipped away, I pick it now.

>>>>>>> [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
>>>>>>> [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer

Both of them are outside u-boot-imx, so they will be merged by Scott / Tom.

>>>>>>
>>>>>> I think all of those go directly into your tree?
>>>>>
>>>>> I had filed vybird stuff off to Stefano for some, hopefully correct
>>>>> reason.  The FAT change and logo change are me, yes.
>>>>
>>>> I guess the mtd change is rather global...
>>>
>>> Ah right.  Maybe I gave it to myself?  I know I assigned it in
>>> patchwork.
>>>
>>>> Currently board/toradex is not specifically marked to be maintained by
>>>> Stefano (we also have Tegra boards). But yeah for Vybrid it probably
>>>> makes sense.
>>>
>>
>> Yes, I saw your patches, I will picked them up after current PR (sent
>> now) will be merged.
> 
> This still did not make it. Can it still be considered for the next
> release?
> 
> There is also:
> - board: toradex: colibri_vf: unset NFS and LOADS/B
> - ARM: vf610: ddrmc: program Dummy DDRBYTE1/2

Applied to u-boot-imx.

> - ddr: vybrid: various fixes (patchset)

There is a (slight) conflict with Lukasz's patches regarding DDR
calibration. I won't pick Lukasz's for 2019.01, and I could solve the
conflict in -next branch. IMHO I have no concerns (open points)
regarding usage of bit shifting instead of BIT() macro. So I pushed this
patchset and I delay Lukasz's to next release.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Lukasz Majewski]

On Wed, 9 Jan 2019 16:41:40 +0100
Stefano Babic <sbabic@denx.de> wrote:

> Hi Stefan, Lukasz,
> 
> On 04/01/19 16:05, Stefan Agner wrote:
> > Hi Stefano,
> > 
> > On 14.12.2018 14:40, Stefano Babic wrote:  
> >> On 14/12/18 14:30, Tom Rini wrote:  
> >>> On Fri, Dec 14, 2018 at 02:26:22PM +0100, Stefan Agner wrote:  
> >>>> On 14.12.2018 14:20, Tom Rini wrote:  
> >>>>> On Fri, Dec 14, 2018 at 02:13:46PM +0100, Stefan Agner wrote:  
> >>>>>> Hi Tom,
> >>>>>>
> >>>>>> On 08.12.2018 17:48, Lukasz Majewski wrote:  
> >>>>>>> Hi Stefan,
> >>>>>>>  
> >>>>>>>> From: Stefan Agner <stefan.agner@toradex.com>
> >>>>>>>>
> >>>>>>>> The current bitmap is a bit larger than necessary, it has a
> >>>>>>>> black border around the Toradex logo. Crop the logo slightly
> >>>>>>>> which safes some space, useful especially on Colibri VFxx.  
> >>>>>>>
> >>>>>>> I can confirm that those changes, as well as
> >>>>>>>
> >>>>>>> [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B  
> 
> You're right, this was slipped away, I pick it now.
> 
> >>>>>>> [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC
> >>>>>>> layouts [PATCH v1] fs: fat: dynamically allocate memory for
> >>>>>>> temporary buffer  
> 
> Both of them are outside u-boot-imx, so they will be merged by
> Scott / Tom.
> 
> >>>>>>
> >>>>>> I think all of those go directly into your tree?  
> >>>>>
> >>>>> I had filed vybird stuff off to Stefano for some, hopefully
> >>>>> correct reason.  The FAT change and logo change are me, yes.  
> >>>>
> >>>> I guess the mtd change is rather global...  
> >>>
> >>> Ah right.  Maybe I gave it to myself?  I know I assigned it in
> >>> patchwork.
> >>>  
> >>>> Currently board/toradex is not specifically marked to be
> >>>> maintained by Stefano (we also have Tegra boards). But yeah for
> >>>> Vybrid it probably makes sense.  
> >>>  
> >>
> >> Yes, I saw your patches, I will picked them up after current PR
> >> (sent now) will be merged.  
> > 
> > This still did not make it. Can it still be considered for the next
> > release?
> > 
> > There is also:
> > - board: toradex: colibri_vf: unset NFS and LOADS/B
> > - ARM: vf610: ddrmc: program Dummy DDRBYTE1/2  
> 
> Applied to u-boot-imx.
> 
> > - ddr: vybrid: various fixes (patchset)  
> 
> There is a (slight) conflict with Lukasz's patches regarding DDR
> calibration. I won't pick Lukasz's for 2019.01, 

Ok. No problem.
( The DDR patch series itself:
http://patchwork.ozlabs.org/cover/1008330/)

> and I could solve the
> conflict in -next branch. IMHO I have no concerns (open points)
> regarding usage of bit shifting instead of BIT() macro. So I pushed
> this patchset and I delay Lukasz's to next release.

Ok. Thanks for the update. 

> 
> Best regards,
> Stefano
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190109/c47e3549/attachment.sig>

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Stefano Babic]

On 09/01/19 22:38, Lukasz Majewski wrote:
> On Wed, 9 Jan 2019 16:41:40 +0100
> Stefano Babic <sbabic@denx.de> wrote:
> 
>> Hi Stefan, Lukasz,
>>
>> On 04/01/19 16:05, Stefan Agner wrote:
>>> Hi Stefano,
>>>
>>> On 14.12.2018 14:40, Stefano Babic wrote:  
>>>> On 14/12/18 14:30, Tom Rini wrote:  
>>>>> On Fri, Dec 14, 2018 at 02:26:22PM +0100, Stefan Agner wrote:  
>>>>>> On 14.12.2018 14:20, Tom Rini wrote:  
>>>>>>> On Fri, Dec 14, 2018 at 02:13:46PM +0100, Stefan Agner wrote:  
>>>>>>>> Hi Tom,
>>>>>>>>
>>>>>>>> On 08.12.2018 17:48, Lukasz Majewski wrote:  
>>>>>>>>> Hi Stefan,
>>>>>>>>>  
>>>>>>>>>> From: Stefan Agner <stefan.agner@toradex.com>
>>>>>>>>>>
>>>>>>>>>> The current bitmap is a bit larger than necessary, it has a
>>>>>>>>>> black border around the Toradex logo. Crop the logo slightly
>>>>>>>>>> which safes some space, useful especially on Colibri VFxx.  
>>>>>>>>>
>>>>>>>>> I can confirm that those changes, as well as
>>>>>>>>>
>>>>>>>>> [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B  
>>
>> You're right, this was slipped away, I pick it now.
>>
>>>>>>>>> [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC
>>>>>>>>> layouts [PATCH v1] fs: fat: dynamically allocate memory for
>>>>>>>>> temporary buffer  
>>
>> Both of them are outside u-boot-imx, so they will be merged by
>> Scott / Tom.
>>
>>>>>>>>
>>>>>>>> I think all of those go directly into your tree?  
>>>>>>>
>>>>>>> I had filed vybird stuff off to Stefano for some, hopefully
>>>>>>> correct reason.  The FAT change and logo change are me, yes.  
>>>>>>
>>>>>> I guess the mtd change is rather global...  
>>>>>
>>>>> Ah right.  Maybe I gave it to myself?  I know I assigned it in
>>>>> patchwork.
>>>>>  
>>>>>> Currently board/toradex is not specifically marked to be
>>>>>> maintained by Stefano (we also have Tegra boards). But yeah for
>>>>>> Vybrid it probably makes sense.  
>>>>>  
>>>>
>>>> Yes, I saw your patches, I will picked them up after current PR
>>>> (sent now) will be merged.  
>>>
>>> This still did not make it. Can it still be considered for the next
>>> release?
>>>
>>> There is also:
>>> - board: toradex: colibri_vf: unset NFS and LOADS/B
>>> - ARM: vf610: ddrmc: program Dummy DDRBYTE1/2  
>>
>> Applied to u-boot-imx.
>>
>>> - ddr: vybrid: various fixes (patchset)  
>>
>> There is a (slight) conflict with Lukasz's patches regarding DDR
>> calibration. I won't pick Lukasz's for 2019.01, 
> 
> Ok. No problem.
> ( The DDR patch series itself:
> http://patchwork.ozlabs.org/cover/1008330/)
> 

There is a topic I would like to check. Stefan introduces with his
patches a DDRMC_CR80_MC_INIT_COMPLETE that is still missing in your
patches. I solved the conflict (not yet pushed to -next) as :

while (!(readl(&ddrmr->cr[80]) & DDRMC_CR80_MC_INIT_COMPLETE))
                 udelay(10);
writel(DDRMC_CR80_MC_INIT_COMPLETE, &ddrmr->cr[81]);

 #ifdef CONFIG_DDRMC_VF610_CALIBRATION
         ddrmc_calibration(ddrmr);
 #endif

But I have no idea if DDRMC_CR80_MC_INIT_COMPLETE should be done before
the calibration of maybe after. Could you help me ?

>> and I could solve the
>> conflict in -next branch. IMHO I have no concerns (open points)
>> regarding usage of bit shifting instead of BIT() macro. So I pushed
>> this patchset and I delay Lukasz's to next release.
> 
> Ok. Thanks for the update. 
> 

Best regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Lukasz Majewski]

Hi Stefano,

> On 09/01/19 22:38, Lukasz Majewski wrote:
> > On Wed, 9 Jan 2019 16:41:40 +0100
> > Stefano Babic <sbabic@denx.de> wrote:
> >   
> >> Hi Stefan, Lukasz,
> >>
> >> On 04/01/19 16:05, Stefan Agner wrote:  
> >>> Hi Stefano,
> >>>
> >>> On 14.12.2018 14:40, Stefano Babic wrote:    
> >>>> On 14/12/18 14:30, Tom Rini wrote:    
> >>>>> On Fri, Dec 14, 2018 at 02:26:22PM +0100, Stefan Agner
> >>>>> wrote:    
> >>>>>> On 14.12.2018 14:20, Tom Rini wrote:    
> >>>>>>> On Fri, Dec 14, 2018 at 02:13:46PM +0100, Stefan Agner
> >>>>>>> wrote:    
> >>>>>>>> Hi Tom,
> >>>>>>>>
> >>>>>>>> On 08.12.2018 17:48, Lukasz Majewski wrote:    
> >>>>>>>>> Hi Stefan,
> >>>>>>>>>    
> >>>>>>>>>> From: Stefan Agner <stefan.agner@toradex.com>
> >>>>>>>>>>
> >>>>>>>>>> The current bitmap is a bit larger than necessary, it has a
> >>>>>>>>>> black border around the Toradex logo. Crop the logo
> >>>>>>>>>> slightly which safes some space, useful especially on
> >>>>>>>>>> Colibri VFxx.    
> >>>>>>>>>
> >>>>>>>>> I can confirm that those changes, as well as
> >>>>>>>>>
> >>>>>>>>> [PATCH v1] board: toradex: colibri_vf: unset NFS and
> >>>>>>>>> LOADS/B    
> >>
> >> You're right, this was slipped away, I pick it now.
> >>  
> >>>>>>>>> [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC
> >>>>>>>>> layouts [PATCH v1] fs: fat: dynamically allocate memory for
> >>>>>>>>> temporary buffer    
> >>
> >> Both of them are outside u-boot-imx, so they will be merged by
> >> Scott / Tom.
> >>  
> >>>>>>>>
> >>>>>>>> I think all of those go directly into your tree?    
> >>>>>>>
> >>>>>>> I had filed vybird stuff off to Stefano for some, hopefully
> >>>>>>> correct reason.  The FAT change and logo change are me,
> >>>>>>> yes.    
> >>>>>>
> >>>>>> I guess the mtd change is rather global...    
> >>>>>
> >>>>> Ah right.  Maybe I gave it to myself?  I know I assigned it in
> >>>>> patchwork.
> >>>>>    
> >>>>>> Currently board/toradex is not specifically marked to be
> >>>>>> maintained by Stefano (we also have Tegra boards). But yeah for
> >>>>>> Vybrid it probably makes sense.    
> >>>>>    
> >>>>
> >>>> Yes, I saw your patches, I will picked them up after current PR
> >>>> (sent now) will be merged.    
> >>>
> >>> This still did not make it. Can it still be considered for the
> >>> next release?
> >>>
> >>> There is also:
> >>> - board: toradex: colibri_vf: unset NFS and LOADS/B
> >>> - ARM: vf610: ddrmc: program Dummy DDRBYTE1/2    
> >>
> >> Applied to u-boot-imx.
> >>  
> >>> - ddr: vybrid: various fixes (patchset)    
> >>
> >> There is a (slight) conflict with Lukasz's patches regarding DDR
> >> calibration. I won't pick Lukasz's for 2019.01,   
> > 
> > Ok. No problem.
> > ( The DDR patch series itself:
> > http://patchwork.ozlabs.org/cover/1008330/)
> >   
> 
> There is a topic I would like to check. Stefan introduces with his
> patches a DDRMC_CR80_MC_INIT_COMPLETE that is still missing in your
> patches. I solved the conflict (not yet pushed to -next) as :
> 
> while (!(readl(&ddrmr->cr[80]) & DDRMC_CR80_MC_INIT_COMPLETE))
>                  udelay(10);
> writel(DDRMC_CR80_MC_INIT_COMPLETE, &ddrmr->cr[81]);
> 
>  #ifdef CONFIG_DDRMC_VF610_CALIBRATION
>          ddrmc_calibration(ddrmr);
>  #endif
> 
> But I have no idea if DDRMC_CR80_MC_INIT_COMPLETE should be done
> before the calibration of maybe after. Could you help me ?

I've already rebased (DDR calibration code) on top of Stefan's patches:

http://git.denx.de/?p=u-boot/u-boot-dfu.git;a=shortlog;h=refs/heads/testing

The code in question looks like in below link:
http://git.denx.de/?p=u-boot/u-boot-dfu.git;a=blob;f=arch/arm/mach-imx/ddrmc-vf610.c;h=9a8e2f6aad10adc45fa791d24ffad52c42c5c492;hb=refs/heads/testing#l231

> 
> >> and I could solve the
> >> conflict in -next branch. IMHO I have no concerns (open points)
> >> regarding usage of bit shifting instead of BIT() macro. So I pushed
> >> this patchset and I delay Lukasz's to next release.  
> > 
> > Ok. Thanks for the update. 
> >   
> 
> Best regards,
> Stefano
> 
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190110/55e8ebee/attachment.sig>

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Stefano Babic]

Hi Lukasz,

On 10/01/19 10:29, Lukasz Majewski wrote:
> Hi Stefano,
> 

[snip]

>> There is a topic I would like to check. Stefan introduces with his
>> patches a DDRMC_CR80_MC_INIT_COMPLETE that is still missing in your
>> patches. I solved the conflict (not yet pushed to -next) as :
>>
>> while (!(readl(&ddrmr->cr[80]) & DDRMC_CR80_MC_INIT_COMPLETE))
>>                  udelay(10);
>> writel(DDRMC_CR80_MC_INIT_COMPLETE, &ddrmr->cr[81]);
>>
>>  #ifdef CONFIG_DDRMC_VF610_CALIBRATION
>>          ddrmc_calibration(ddrmr);
>>  #endif
>>
>> But I have no idea if DDRMC_CR80_MC_INIT_COMPLETE should be done
>> before the calibration of maybe after. Could you help me ?
> 
> I've already rebased (DDR calibration code) on top of Stefan's patches:
> 
> http://git.denx.de/?p=u-boot/u-boot-dfu.git;a=shortlog;h=refs/heads/testing
> 
> The code in question looks like in below link:
> http://git.denx.de/?p=u-boot/u-boot-dfu.git;a=blob;f=arch/arm/mach-imx/ddrmc-vf610.c;h=9a8e2f6aad10adc45fa791d24ffad52c42c5c492;hb=refs/heads/testing#l231

ok, thanks - so the DDRMC_CR80_MC_INIT_COMPLETE is called before
calibration. I have already did this by rebasing myself. There is no
need you repost, I have merged yours patches into my -next branch.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly

[Lukasz Majewski]

On Thu, 10 Jan 2019 10:34:21 +0100
Stefano Babic <sbabic@denx.de> wrote:

> Hi Lukasz,
> 
> On 10/01/19 10:29, Lukasz Majewski wrote:
> > Hi Stefano,
> >   
> 
> [snip]
> 
> >> There is a topic I would like to check. Stefan introduces with his
> >> patches a DDRMC_CR80_MC_INIT_COMPLETE that is still missing in your
> >> patches. I solved the conflict (not yet pushed to -next) as :
> >>
> >> while (!(readl(&ddrmr->cr[80]) & DDRMC_CR80_MC_INIT_COMPLETE))
> >>                  udelay(10);
> >> writel(DDRMC_CR80_MC_INIT_COMPLETE, &ddrmr->cr[81]);
> >>
> >>  #ifdef CONFIG_DDRMC_VF610_CALIBRATION
> >>          ddrmc_calibration(ddrmr);
> >>  #endif
> >>
> >> But I have no idea if DDRMC_CR80_MC_INIT_COMPLETE should be done
> >> before the calibration of maybe after. Could you help me ?  
> > 
> > I've already rebased (DDR calibration code) on top of Stefan's
> > patches:
> > 
> > http://git.denx.de/?p=u-boot/u-boot-dfu.git;a=shortlog;h=refs/heads/testing
> > 
> > The code in question looks like in below link:
> > http://git.denx.de/?p=u-boot/u-boot-dfu.git;a=blob;f=arch/arm/mach-imx/ddrmc-vf610.c;h=9a8e2f6aad10adc45fa791d24ffad52c42c5c492;hb=refs/heads/testing#l231  
> 
> ok, thanks - so the DDRMC_CR80_MC_INIT_COMPLETE is called before
> calibration. I have already did this by rebasing myself. There is no
> need you repost, I have merged yours patches into my -next branch.
> 

Thanks :-) (And I do have more vf610 patches in the queue to move it to
DM - as it uses only single u-boot binary).

I will post them when we release v2019.01

> Regards,
> Stefano
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190110/262ab093/attachment.sig>