[U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)

Marek Vasut
2018-12-12T23:04:23Z

On 12/12/2018 11:58 PM, Lukasz Majewski wrote:
> Dear Marek,

This looks quite heavy after RC1 . How thoroughly was this tested ?

> The following changes since commit 51b24944fdbfa760aa87a1ad812355e1df9c9355:
>
> usb: musb: Remove legacy CONFIG_USB_DA8XX (2018-12-12 15:23:04 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-dfu.git
>
> for you to fetch changes up to 8a3755462f65c032528af70c6582abf89f91b2bc:
>
> configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in SPl (2018-12-12 15:35:08 +0100)
>
> ----------------------------------------------------------------
> Jean-Jacques Hiblot (20):
> usb: dwc3-generic: make it compatible with "ti, keystone-dwc3"
> board: ks2_evm: Enable the USB clocks if DM_USB is used
> ARM: dts: k2g-evm: enable USB0 and USB1
> PHY: Add phy driver for the keystone USB PHY
> usb: host: replace xhci-keystone driver by the generic dwc3 driver
> configs: k2g_evm: Enable DFU on K2G EVM
> spl: drivers: Link usb common library to SPL if USB gadget is enabled
> spl: net: dm: usb: bind the gadget before attempting to load the image
> phy: omap_usb2: Add support for am437x
> dwc3-generic: Add support for the am437x
> board: ti: am43xx: turn on USB clocks
> dts: Add a u-boot specific dtsi file for the am4372
> dts: am4372: Enable USB1 in SPL
> configs: am43xx_evm: Enable DM_USB and DM_USB_GADGET
> configs: am43xx: Enable RNDIS support in SPL
> usb: musb-new: Allow the diver not to use the set_phy_power() callback
> usb: musb-new: Add support for DM_USB
> arm: am33xx: Register USB controllers if DM_USB is used but not OF_CONTROL
> configs: am335x_evm: Do not disable DM_USB in SPL
> configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in SPl
>
> arch/arm/dts/am4372-generic-u-boot.dtsi | 2 +
> arch/arm/dts/am4372-u-boot.dtsi | 40 ++++++++++++++++++
> arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 2 +
> arch/arm/dts/am437x-idk-evm-u-boot.dtsi | 2 +
> arch/arm/dts/am437x-sk-evm-u-boot.dtsi | 2 +
> arch/arm/dts/keystone-k2g-evm.dts | 28 +++++++++++++
> arch/arm/dts/keystone-k2g.dtsi | 56 +++++++++++++++++++++++++
> arch/arm/include/asm/omap_musb.h | 8 ++++
> arch/arm/mach-omap2/am33xx/board.c | 58 ++++++++++++++++++++++----
> board/ti/am43xx/board.c | 22 ++++++++++
> board/ti/ks2_evm/board.c | 12 ++++++
> common/Makefile | 3 ++
> common/spl/spl_net.c | 4 +-
> configs/am335x_boneblack_vboot_defconfig | 10 +++++
> configs/am43xx_evm_defconfig | 19 +++++++++
> configs/k2e_evm_defconfig | 7 ++++
> configs/k2e_hs_evm_defconfig | 7 ++++
> configs/k2g_evm_defconfig | 12 ++++++
> configs/k2g_hs_evm_defconfig | 12 ++++++
> configs/k2hk_evm_defconfig | 7 ++++
> configs/k2hk_hs_evm_defconfig | 7 ++++
> configs/k2l_evm_defconfig | 7 ++++
> configs/k2l_hs_evm_defconfig | 7 ++++
> drivers/Makefile | 1 +
> drivers/phy/Kconfig | 10 +++++
> drivers/phy/Makefile | 1 +
> drivers/phy/keystone-usb-phy.c | 109 +++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/phy/omap-usb2-phy.c | 45 +++++++++++++++-----
> drivers/usb/dwc3/dwc3-generic.c | 2 +
> drivers/usb/host/Makefile | 1 -
> drivers/usb/host/xhci-keystone.c | 240 -----------------------------------------------------------------------------------------------------------
> drivers/usb/musb-new/am35x.c | 8 ++--
> drivers/usb/musb-new/musb_dsps.c | 8 ++--
> drivers/usb/musb-new/musb_gadget.c | 11 +++++
> drivers/usb/musb-new/musb_uboot.c | 4 +-
> drivers/usb/musb-new/ti-musb.c | 181 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
> include/configs/am335x_evm.h | 1 -
> include/configs/ti_armv7_keystone2.h | 17 +++++---
> 38 files changed, 649 insertions(+), 324 deletions(-)
> create mode 100644 arch/arm/dts/am4372-u-boot.dtsi
> create mode 100644 drivers/phy/keystone-usb-phy.c
> delete mode 100644 drivers/usb/host/xhci-keystone.c
>
> Travis-Ci: https://travis-ci.org/lmajewski/u-boot-dfu/builds/467026476
>
> This is the last instalment of patches from Jean-Jacques
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
>

--
Best regards,
Marek Vasut