From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 01/14] tpc70: config: Add script commands to update u-boot and OE's wic
Date: Wed, 2 Jan 2019 10:50:15 +0100 [thread overview]
Message-ID: <20190102105015.56552554@jawa> (raw)
In-Reply-To: <0c1a65e7-0798-1511-0ca7-7ca66c4f590b@denx.de>
Hi Marek,
> On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> > Signed-off-by: Lukasz Majewski <lukma@denx.de>
>
> The tags should be ARM: imx: ...
>
> The commit message is missing.
>
> > ---
> >
> > include/configs/kp_imx6q_tpc.h | 21 +++++++++++++++++++++
> > 1 file changed, 21 insertions(+)
> >
> > diff --git a/include/configs/kp_imx6q_tpc.h
> > b/include/configs/kp_imx6q_tpc.h index b6b27ee1d5..ee9c56bc21 100644
> > --- a/include/configs/kp_imx6q_tpc.h
> > +++ b/include/configs/kp_imx6q_tpc.h
> > @@ -89,11 +89,32 @@
> > "rdinit=/sbin/init\0" \
> > "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit}
> > ${debug} \0" \ "fit_config=mx6q_tpc70_conf\0" \
> > + "uboot_file=u-boot.img\0" \
> > + "SPL_file=SPL\0" \
> > + "wic_file=kp-image-kpimx6qtpc.wic\0" \
>
> Why don't you just generate a fitImage and use the fitupd for this ?
This is one of possible solutions - yes.
>
> > "upd_image=st.4k\0" \
> > "updargs=setenv bootargs console=${console} ${smp}"\
> > "rdinit=${rdinit} ${debug} ${displayargs}\0" \
> > "loadusb=usb start; " \
> > "fatload usb 0 ${loadaddr} ${upd_image}\0" \
> > + "upd_uboot_sd=" \
> > + "if tftp ${loadaddr} ${uboot_file}; then " \
> > + "setexpr blkc ${filesize} / 0x200;" \
> > + "setexpr blkc ${blkc} + 1;" \
> > + "mmc write ${loadaddr} 0x8A ${blkc};" \
> > + "fi;\0" \
> > + "upd_SPL_sd=" \
> > + "if tftp ${loadaddr} ${SPL_file}; then " \
> > + "setexpr blkc ${filesize} / 0x200;" \
> > + "setexpr blkc ${blkc} + 1;" \
> > + "mmc write ${loadaddr} 0x2 ${blkc};" \
> > + "fi;\0" \
> > + "upd_wic=" \
> > + "if tftp ${loadaddr} ${wic_file}; then " \
> > + "setexpr blkc ${filesize} / 0x200;" \
> > + "setexpr blkc ${blkc} + 1;" \
> > + "mmc write ${loadaddr} 0x0 ${blkc};" \
> > + "fi;\0" \
> > "usbupd=echo Booting update from usb ...; " \
> > "setenv bootargs; " \
> > "run updargs; " \
> >
>
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190102/50b2c6a0/attachment.sig>
next prev parent reply other threads:[~2019-01-02 9:50 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-01 23:37 [U-Boot] [PATCH v1 00/14] dm: Convert TPC70 to use DM and DTS in SPL and u-boot proper Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 01/14] tpc70: config: Add script commands to update u-boot and OE's wic Lukasz Majewski
2019-01-02 1:07 ` Marek Vasut
2019-01-02 9:50 ` Lukasz Majewski [this message]
2019-01-02 14:09 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 02/14] tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update Lukasz Majewski
2019-01-02 1:08 ` Marek Vasut
2019-01-02 9:47 ` Lukasz Majewski
2019-01-02 14:09 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 03/14] tpc70: Provide board_boot_order() function to distinct between eMMC and SD boot Lukasz Majewski
2019-01-05 1:57 ` Simon Glass
2019-01-01 23:37 ` [U-Boot] [PATCH v1 04/14] DTS: imx: Remove not needed '#address-cells' and '#size-cells' properties Lukasz Majewski
2019-01-02 1:09 ` Marek Vasut
2019-01-02 9:43 ` Lukasz Majewski
2019-01-02 14:10 ` Marek Vasut
2019-01-02 14:34 ` Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 05/14] board: cosmetic: Use define to set ENET clock selection mask on TPC70 Lukasz Majewski
2019-01-02 1:09 ` Marek Vasut
2019-01-02 10:06 ` Lukasz Majewski
2019-01-02 14:12 ` Marek Vasut
2019-01-02 14:37 ` Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 06/14] DM: tpc70: led: Enable LED default state Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 07/14] pinctrl: imx: Replace static soc info definitions with run time allocations Lukasz Majewski
2019-01-02 1:13 ` Marek Vasut
2019-01-02 8:26 ` Lukasz Majewski
2019-01-02 14:14 ` Marek Vasut
2019-01-03 7:22 ` Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 08/14] DTS: imx: Add "u-boot, dm-pre-reloc" property to relevant imx6qdl nodes Lukasz Majewski
2019-01-02 1:13 ` Marek Vasut
2019-01-02 9:23 ` Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 09/14] imx: serial: dm: Enable DM_FLAG_PRE_RELOC in the IMX uart driver Lukasz Majewski
2019-01-02 1:14 ` Marek Vasut
2019-01-02 8:42 ` Lukasz Majewski
2019-01-02 14:15 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 10/14] imx: clock: Introduce set_fec_clock() to configure ETH clock (imx6) Lukasz Majewski
2019-01-02 1:16 ` Marek Vasut
2019-01-02 9:00 ` Lukasz Majewski
2019-01-02 14:18 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 11/14] DM: net: imx: Provide weak function to initialize fec clocks Lukasz Majewski
2019-01-02 1:17 ` Marek Vasut
2019-01-02 8:47 ` Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 12/14] imx: mmc: Use 'fsl, usdhc-index' property to provide esdhc controller number Lukasz Majewski
2019-01-02 1:18 ` Marek Vasut
2019-01-02 10:31 ` Lukasz Majewski
2019-01-02 14:17 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 13/14] DTS: imx: tpc70: Add TPC70 board (imx6q based) device tree description Lukasz Majewski
2019-01-02 1:19 ` Marek Vasut
2019-01-02 8:49 ` Lukasz Majewski
2019-01-02 14:17 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 14/14] imx: tpc70: Convert TPC70 (imx6q based) board to use DM/DTS in SPL and u-boot Lukasz Majewski
2019-01-05 1:57 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190102105015.56552554@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox