From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 05/14] board: cosmetic: Use define to set ENET clock selection mask on TPC70
Date: Wed, 2 Jan 2019 11:06:36 +0100 [thread overview]
Message-ID: <20190102110636.2bcec90b@jawa> (raw)
In-Reply-To: <24b05042-e315-6063-ffa5-613ae27241e6@denx.de>
Hi Marek,
> On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> > This is a cosmetic change, just to use proper define.
> >
> > Signed-off-by: Lukasz Majewski <lukma@denx.de>
>
> The subject tags are wrong, fix globally.
Is there any doc which describes the allowed/not allowed tags (either
with Linux or U-boot)?
From my experience it is a some kind of a convention depending on the
maintainer (which helps him to spot relevant patches on ML).
In [1] - point 14) there is:
The canonical patch subject line is:
"Subject: [PATCH 001/123] subsystem: summary phrase"
and the "subsystem: " is the tag.
In the case of this patch -> I do fix stuff in "board(s)" which is
"cosmetic".
Or will we only stick to tags/mails from ./doc/git-mailrc ?
[1] -
https://www.kernel.org/doc/html/v4.17/process/submitting-patches.html
>
> > ---
> >
> > board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c
> > b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c index
> > ace986fa05..bcc22b1aa8 100644 ---
> > a/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c +++
> > b/board/k+p/kp_imx6q_tpc/kp_imx6q_tpc.c @@ -118,7 +118,8 @@ static
> > int setup_fec_clock(void) struct iomuxc *iomuxc_regs = (struct
> > iomuxc *)IOMUXC_BASE_ADDR;
> > /* set gpr1[21] to select anatop clock */
> > - clrsetbits_le32(&iomuxc_regs->gpr[1], 0x1 << 21, 0x1 <<
> > 21);
> > + clrsetbits_le32(&iomuxc_regs->gpr[1],
> > IOMUXC_GPR1_ENET_CLK_SEL_MASK,
> > + IOMUXC_GPR1_ENET_CLK_SEL_MASK);
> >
> > return enable_fec_anatop_clock(0, ENET_50MHZ);
> > }
> >
>
>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190102/9d16dda1/attachment.sig>
next prev parent reply other threads:[~2019-01-02 10:06 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-01 23:37 [U-Boot] [PATCH v1 00/14] dm: Convert TPC70 to use DM and DTS in SPL and u-boot proper Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 01/14] tpc70: config: Add script commands to update u-boot and OE's wic Lukasz Majewski
2019-01-02 1:07 ` Marek Vasut
2019-01-02 9:50 ` Lukasz Majewski
2019-01-02 14:09 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 02/14] tpc70: config: Update TPC70 config to support eMMC's boot0 SPL update Lukasz Majewski
2019-01-02 1:08 ` Marek Vasut
2019-01-02 9:47 ` Lukasz Majewski
2019-01-02 14:09 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 03/14] tpc70: Provide board_boot_order() function to distinct between eMMC and SD boot Lukasz Majewski
2019-01-05 1:57 ` Simon Glass
2019-01-01 23:37 ` [U-Boot] [PATCH v1 04/14] DTS: imx: Remove not needed '#address-cells' and '#size-cells' properties Lukasz Majewski
2019-01-02 1:09 ` Marek Vasut
2019-01-02 9:43 ` Lukasz Majewski
2019-01-02 14:10 ` Marek Vasut
2019-01-02 14:34 ` Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 05/14] board: cosmetic: Use define to set ENET clock selection mask on TPC70 Lukasz Majewski
2019-01-02 1:09 ` Marek Vasut
2019-01-02 10:06 ` Lukasz Majewski [this message]
2019-01-02 14:12 ` Marek Vasut
2019-01-02 14:37 ` Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 06/14] DM: tpc70: led: Enable LED default state Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 07/14] pinctrl: imx: Replace static soc info definitions with run time allocations Lukasz Majewski
2019-01-02 1:13 ` Marek Vasut
2019-01-02 8:26 ` Lukasz Majewski
2019-01-02 14:14 ` Marek Vasut
2019-01-03 7:22 ` Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 08/14] DTS: imx: Add "u-boot, dm-pre-reloc" property to relevant imx6qdl nodes Lukasz Majewski
2019-01-02 1:13 ` Marek Vasut
2019-01-02 9:23 ` Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 09/14] imx: serial: dm: Enable DM_FLAG_PRE_RELOC in the IMX uart driver Lukasz Majewski
2019-01-02 1:14 ` Marek Vasut
2019-01-02 8:42 ` Lukasz Majewski
2019-01-02 14:15 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 10/14] imx: clock: Introduce set_fec_clock() to configure ETH clock (imx6) Lukasz Majewski
2019-01-02 1:16 ` Marek Vasut
2019-01-02 9:00 ` Lukasz Majewski
2019-01-02 14:18 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 11/14] DM: net: imx: Provide weak function to initialize fec clocks Lukasz Majewski
2019-01-02 1:17 ` Marek Vasut
2019-01-02 8:47 ` Lukasz Majewski
2019-01-01 23:37 ` [U-Boot] [PATCH v1 12/14] imx: mmc: Use 'fsl, usdhc-index' property to provide esdhc controller number Lukasz Majewski
2019-01-02 1:18 ` Marek Vasut
2019-01-02 10:31 ` Lukasz Majewski
2019-01-02 14:17 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 13/14] DTS: imx: tpc70: Add TPC70 board (imx6q based) device tree description Lukasz Majewski
2019-01-02 1:19 ` Marek Vasut
2019-01-02 8:49 ` Lukasz Majewski
2019-01-02 14:17 ` Marek Vasut
2019-01-01 23:37 ` [U-Boot] [PATCH v1 14/14] imx: tpc70: Convert TPC70 (imx6q based) board to use DM/DTS in SPL and u-boot Lukasz Majewski
2019-01-05 1:57 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190102110636.2bcec90b@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox