From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adam Ford Date: Thu, 10 Jan 2019 15:21:35 -0600 Subject: [U-Boot] [PATCH] mmc: fsl_esdhc: Move ifdef to CONFIG_IS_ENABLED Message-ID: <20190110212135.28869-1-aford173@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de For some boards, DM_REGULATOR and DM_GPIO may not be enabled in SPL but enabled in U-Boot. So switching to CONFIG_IS_ENABLED from ifdef allows the esdhc driver to function with some limited functionality in SPL. Signed-off-by: Adam Ford diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 74007e2ad4..1faae1987a 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -1395,7 +1395,7 @@ static int fsl_esdhc_probe(struct udevice *dev) int node = dev_of_offset(dev); struct esdhc_soc_data *data = (struct esdhc_soc_data *)dev_get_driver_data(dev); -#ifdef CONFIG_DM_REGULATOR +#if CONFIG_IS_ENABLED(DM_REGULATOR) struct udevice *vqmmc_dev; #endif fdt_addr_t addr; @@ -1436,7 +1436,7 @@ static int fsl_esdhc_probe(struct udevice *dev) priv->non_removable = 1; } else { priv->non_removable = 0; -#ifdef CONFIG_DM_GPIO +#if CONFIG_IS_ENABLED(DM_GPIO) gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN); #endif @@ -1453,7 +1453,7 @@ static int fsl_esdhc_probe(struct udevice *dev) priv->vs18_enable = 0; -#ifdef CONFIG_DM_REGULATOR +#if CONFIG_IS_ENABLED(DM_REGULATOR) /* * If emmc I/O has a fixed voltage at 1.8V, this must be provided, * otherwise, emmc will work abnormally. -- 2.17.1