From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 01/21] ARM: DTS: vybrid: Add vf-u-boot.dtsi to set 'u-boot, dm-pre-reloc' in soc
Date: Tue, 15 Jan 2019 08:58:58 +0100 [thread overview]
Message-ID: <20190115085858.618bd4d9@jawa> (raw)
In-Reply-To: <20190114143000.GD5463@bill-the-cat>
Hi Tom,
> On Mon, Jan 14, 2019 at 03:17:20PM +0100, Lukasz Majewski wrote:
>
> > This property is necessary to allow pinctrl configuration before
> > relocation (uart, DDR pins).
> >
> > Separate file will facilitate updating vf.dtsi from the Linux
> > kernel.
> >
> > Signed-off-by: Lukasz Majewski <lukma@denx.de>
> > ---
> >
> > arch/arm/dts/vf-u-boot.dtsi | 11 +++++++++++
> > arch/arm/dts/vf.dtsi | 1 +
> > 2 files changed, 12 insertions(+)
> > create mode 100644 arch/arm/dts/vf-u-boot.dtsi
>
> We should call the file 'vf610-u-boot.dtsi' which will get it
> automatically included in all vf610 platforms but still allow boards
> that need their own -u-boot.dtsi file to #include vf610-u-boot.dtsi
>
Please forgive me but I do have a hard time to parse the above sentence.
Do you propose to:
1. Rename vf-u-boot.dtsi -> vf610-u-boot.dtsi ?
And then just include it in the generic (easily ported from Linux)
vf.dtsi file?
or
2. Shall I rename vf-u-boot.dtsi -> vf610-u-boot.dtsi and then do not
include it into vf.dtsi, but it shall be included in board dts files
(like bk4.dtsi) ?
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190115/5d3b2574/attachment.sig>
next prev parent reply other threads:[~2019-01-15 7:58 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-14 14:17 [U-Boot] [PATCH v1 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 01/21] ARM: DTS: vybrid: Add vf-u-boot.dtsi to set 'u-boot, dm-pre-reloc' in soc Lukasz Majewski
2019-01-14 14:30 ` Tom Rini
2019-01-15 7:58 ` Lukasz Majewski [this message]
2019-01-16 2:24 ` Tom Rini
2019-01-16 7:33 ` Lukasz Majewski
2019-01-16 12:23 ` Tom Rini
2019-01-14 14:17 ` [U-Boot] [PATCH v1 02/21] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 03/21] net: Kconfig: FEC: Add dependency on VF610 Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 04/21] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 05/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 06/21] vybrid: Define the imx_get_mac_from_fuse() as a __weak function Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 07/21] pcm052: board: Remove "m4go" command as it is superseded by "bootaux" Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 08/21] pcm052: board: vybrid: Update the board name for BK4 device Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 09/21] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 10/21] pcm052: board: cosmetic: Add copyright notice to pcm052.c Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 11/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052.dts) Lukasz Majewski
2019-01-14 14:32 ` Tom Rini
2019-01-15 8:20 ` Lukasz Majewski
2019-01-16 2:33 ` Tom Rini
2019-01-16 7:47 ` Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 12/21] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 13/21] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 14/21] config: bk4: Update include/configs/bk4r1.h file Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 15/21] pcm052: board: Remove in-board setup code (it is now replaced by DM setup) Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 16/21] config: bk4: Update u-boot script to support recovery via SD card Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 17/21] config: bk4: Update u-boot envs to support NOR memories initial setup Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 18/21] pcm052: bk4: sdcard: Add support for SD card booting/recovery Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 19/21] pcm052: board: Add code to setup LED default states Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 20/21] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 21/21] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190115085858.618bd4d9@jawa \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox