[U-Boot] [PATCH 0/4] Add network support for Ocelots SoCs

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Hello,

this series allows to use the switch component of the Ocelots SoC as
a network interface.

The binding used is exactly the same of the one already used by Linux.

There is also a patch adding a workaround needed on the Ocelot based
boards: indeed the pin connected to the DDR reset is part of the
switch subsystem. So we need ensure that the DDR is not reset during
the switch reset.

Gregory

Gregory CLEMENT (4):
  MIPS: mscc: ocelot: Add ethernet nodes for Ocelot
  net: add MSCC Ocelot switch support
  MIPS: mscc: ocelot: add switch reset support
  configs: mscc_ocelot: add network support

 MAINTAINERS                     |   1 +
 arch/mips/dts/mscc,ocelot.dtsi  |  97 ++++
 arch/mips/dts/ocelot_pcb123.dts |  20 +
 board/mscc/ocelot/ocelot.c      |  28 ++
 configs/mscc_ocelot_defconfig   |   1 +
 drivers/net/Kconfig             |   7 +
 drivers/net/Makefile            |   1 +
 drivers/net/ocelot_switch.c     | 837 ++++++++++++++++++++++++++++++++
 8 files changed, 992 insertions(+)
 create mode 100644 drivers/net/ocelot_switch.c

-- 
2.20.1