[U-Boot] [PATCH 1/4] MIPS: mscc: ocelot: Add ethernet nodes for Ocelot

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Import Ethernet related nodes from Linux

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
 arch/mips/dts/mscc,ocelot.dtsi  | 97 +++++++++++++++++++++++++++++++++
 arch/mips/dts/ocelot_pcb123.dts | 20 +++++++
 2 files changed, 117 insertions(+)

diff --git a/arch/mips/dts/mscc,ocelot.dtsi b/arch/mips/dts/mscc,ocelot.dtsi
index 2592003103..4f3fe356c4 100644
--- a/arch/mips/dts/mscc,ocelot.dtsi
+++ b/arch/mips/dts/mscc,ocelot.dtsi
@@ -112,6 +112,98 @@
 			status = "disabled";
 		};
 
+		switch at 1010000 {
+			pinctrl-0 = <&miim1_pins>;
+			pinctrl-names = "default";
+
+			compatible = "mscc,vsc7514-switch";
+			reg = <0x1010000 0x10000>, /* VTSS_TO_SYS */
+			      <0x1030000 0x10000>, /* VTSS_TO_REW */
+			      <0x1080000 0x100>, /* VTSS_TO_DEVCPU_QS */
+			      <0x10d0000 0x10000>, /* VTSS_TO_HSIO */
+			      <0x11e0000 0x100>, /* VTSS_TO_DEV_0 */
+			      <0x11f0000 0x100>, /* VTSS_TO_DEV_1 */
+			      <0x1200000 0x100>, /* VTSS_TO_DEV_2 */
+			      <0x1210000 0x100>, /* VTSS_TO_DEV_3 */
+			      <0x1220000 0x100>, /* VTSS_TO_DEV_4 */
+			      <0x1230000 0x100>, /* VTSS_TO_DEV_5 */
+			      <0x1240000 0x100>, /* VTSS_TO_DEV_6 */
+			      <0x1250000 0x100>, /* VTSS_TO_DEV_7 */
+			      <0x1260000 0x100>, /* VTSS_TO_DEV_8 */
+			      <0x1270000 0x100>, /* NA */
+			      <0x1280000 0x100>, /* NA */
+			      <0x1800000 0x80000>, /* VTSS_TO_QSYS */
+			      <0x1880000 0x10000>; /* VTSS_TO_ANA */
+			reg-names = "sys", "rew", "qs", "hsio", "port0",
+				    "port1", "port2", "port3", "port4", "port5",
+				    "port6", "port7", "port8", "port9",
+				    "port10", "qsys", "ana";
+			interrupts = <21 22>;
+			interrupt-names = "xtr", "inj";
+			status = "okay";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port at 0 {
+					reg = <0>;
+				};
+				port1: port at 1 {
+					reg = <1>;
+				};
+				port2: port at 2 {
+					reg = <2>;
+				};
+				port3: port at 3 {
+					reg = <3>;
+				};
+				port4: port at 4 {
+					reg = <4>;
+				};
+				port5: port at 5 {
+					reg = <5>;
+				};
+				port6: port at 6 {
+					reg = <6>;
+				};
+				port7: port at 7 {
+					reg = <7>;
+				};
+				port8: port at 8 {
+					reg = <8>;
+				};
+				port9: port at 9 {
+					reg = <9>;
+				};
+				port10: port at 10 {
+					reg = <10>;
+				};
+			};
+		};
+
+		mdio0: mdio at 107009c {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mscc,ocelot-miim";
+			reg = <0x107009c 0x24>, <0x10700f0 0x8>;
+			interrupts = <14>;
+			status = "disabled";
+
+			phy0: ethernet-phy at 0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy at 1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy at 2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy at 3 {
+				reg = <3>;
+			};
+		};
+
 		reset at 1070008 {
 			compatible = "mscc,ocelot-chip-reset";
 			reg = <0x1070008 0x4>;
@@ -144,6 +236,11 @@
 				function = "si";
 			};
 
+			miim1_pins: miim1-pins {
+				pins = "GPIO_14", "GPIO_15";
+				function = "miim1";
+			};
+
 			spi_cs2_pin: spi-cs2-pin {
 				pins = "GPIO_9";
 				function = "si";
diff --git a/arch/mips/dts/ocelot_pcb123.dts b/arch/mips/dts/ocelot_pcb123.dts
index c4cb7a1194..a4fa37001f 100644
--- a/arch/mips/dts/ocelot_pcb123.dts
+++ b/arch/mips/dts/ocelot_pcb123.dts
@@ -35,3 +35,23 @@
 	status = "okay";
 	mscc,sgpio-ports = <0x00FFFFFF>;
 };
+
+&mdio0 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+};
+
+&port2 {
+	phy-handle = <&phy2>;
+};
+
+&port3 {
+	phy-handle = <&phy3>;
+};
-- 
2.20.1