From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 11/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052.dts)
Date: Tue, 15 Jan 2019 21:33:49 -0500 [thread overview]
Message-ID: <20190116023349.GJ27429@bill-the-cat> (raw)
In-Reply-To: <20190115092016.5a5f55bc@jawa>
On Tue, Jan 15, 2019 at 09:20:16AM +0100, Lukasz Majewski wrote:
> Hi Tom,
>
> > On Mon, Jan 14, 2019 at 03:17:30PM +0100, Lukasz Majewski wrote:
> > > This commit provides update to the bk4r1.dts file with
> > > more on SoC HW description.
> > > Moreover, a new vf610-pcm052.drsi file has been introduced
> > > to reuse the common code between devices based on Phytec's
> > > pcm052 modules.
> > > Ported from Linux kernel - v4.20 (tag)
> > >
> > > Signed-off-by: Lukasz Majewski <lukma@denx.de>
> > > ---
> > >
> > > arch/arm/dts/bk4r1.dts | 108 ++++++++++++-----
> > > arch/arm/dts/pcm052.dts | 6 +-
> > > arch/arm/dts/vf610-pcm052.dtsi | 266
> > > +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 346
> > > insertions(+), 34 deletions(-) create mode 100644
> > > arch/arm/dts/vf610-pcm052.dtsi
> > >
> > > diff --git a/arch/arm/dts/bk4r1.dts b/arch/arm/dts/bk4r1.dts
> > > index 866b80e0b0..55cd53384a 100644
> > > --- a/arch/arm/dts/bk4r1.dts
> > > +++ b/arch/arm/dts/bk4r1.dts
> > > @@ -1,47 +1,97 @@
> > > // SPDX-License-Identifier: GPL-2.0+ OR X11
> > > /*
> > > + * (C) Copyright 2018
> > > + * Lukasz Majewski, DENX Software Engineering, lukma at denx.de.
> > > + *
> > > * Copyright 2016 Toradex AG
> > > */
> > >
> > > /dts-v1/;
> > > -#include "vf.dtsi"
> > > +#include "vf610-pcm052.dtsi"
> > > +#include "vf610-pinfunc.h"
> > >
> > > / {
> > > - model = "Phytec phyCORE-Vybrid";
> > > - compatible = "phytec,pcm052", "fsl,vf610";
> > > + model = "Liebherr (LVF) BK4 Vybrid Board";
> > > + compatible = "lvf,bk4", "fsl,vf610";
> > >
> > > - chosen {
> > > - stdout-path = &uart1;
> > > - };
> > > + leds {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_gpio_leds>;
> > >
> > > - aliases {
> > > - spi0 = &qspi0;
> > > - };
> > > + compatible = "gpio-leds";
> > >
> > > -};
> > > + /* PTE15 PORT3[24] H6 green */
> > > + led at 0 {
> > > + label = "0";
> > > + gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
> > > + default-state = "off";
> > > + };
> > > +
> > > + /* PTA12 PORT0[5] H5 green */
> > > + led at 1 {
> > > + label = "1";
> > > + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
> > > + default-state = "off";
> > > + };
> > > +
> > > + /* PTE20 PORT3[39] H4 green */
> > > + led at 2 {
> > > + label = "2";
> > > + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
> > > + default-state = "off";
> > > + };
> > >
> > > -&uart1 {
> > > - status = "okay";
> > > + /* PTE12 PORT3[21] H3 green */
> > > + led at 3 {
> > > + label = "3";
> > > + gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
> > > + default-state = "off";
> > > + };
> > > +
> > > + /* LED6 is now PRESET ETH -> PTA16 PORT0[6] H6
> > > red */
> > > + /* PTE9 PORT3[18] H5 red */
> > > + led at 4 {
> > > + label = "5";
> > > + gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
> > > + default-state = "off";
> > > + };
> > > +
> > > + /* PTE23 PORT4[0] H4 red */
> > > + led at 5 {
> > > + label = "6";
> > > + gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
> > > + default-state = "off";
> > > + };
> > > +
> > > + /* PTE16 PORT3[25] H3 red */
> > > + led at 6 {
> > > + label = "7";
> > > + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
> > > + default-state = "off";
> > > + };
> > > + };
> > > };
> > >
> > > -&qspi0 {
> > > - bus-num = <0>;
> > > - num-cs = <2>;
> > > - status = "okay";
> > > -
> > > - qflash0: spi_flash at 0 {
> > > - #address-cells = <1>;
> > > - #size-cells = <1>;
> > > - compatible = "spi-flash";
> > > - spi-max-frequency = <108000000>;
> > > - reg = <0>;
> > > +&iomuxc {
> > > + pinctrl-0 = <&pinctrl_ddr &pinctrl_hog>;
> > > +
> > > + pinctrl_hog: hoggrp {
> > > + fsl,pins = <
> > > + /* ETH control pins */
> > > + VF610_PAD_PTE17__GPIO_122
> > > 0x1183
> > > + VF610_PAD_PTA16__GPIO_6 0x1183
> > > + >;
> > > };
> > >
> > > - qflash1: spi_flash at 1 {
> > > - #address-cells = <1>;
> > > - #size-cells = <1>;
> > > - compatible = "spi-flash";
> > > - spi-max-frequency = <66000000>;
> > > - reg = <1>;
> > > + pinctrl_gpio_leds: gpioledsgrp {
> > > + fsl,pins = <
> > > + /* LEDS */
> > > + VF610_PAD_PTE15__GPIO_120 0x1183
> > > + VF610_PAD_PTA12__GPIO_5 0x1183
> > > + VF610_PAD_PTE9__GPIO_114 0x1183
> > > + VF610_PAD_PTE20__GPIO_125 0x1183
> > > + VF610_PAD_PTE23__GPIO_128 0x1183
> > > + VF610_PAD_PTE16__GPIO_121 0x1183
> > > + >;
> > > };
> > > };
> > > diff --git a/arch/arm/dts/pcm052.dts b/arch/arm/dts/pcm052.dts
> > > index 6489fdc6f4..22026024ea 100644
> > > --- a/arch/arm/dts/pcm052.dts
> > > +++ b/arch/arm/dts/pcm052.dts
> > > @@ -4,7 +4,7 @@
> > > */
> > >
> > > /dts-v1/;
> > > -#include "vf.dtsi"
> > > +#include "vf610-pcm052.dtsi"
> > >
> > > / {
> > > model = "Phytec phyCORE-Vybrid";
> > > @@ -15,7 +15,3 @@
> > > };
> > >
> > > };
> > > -
> > > -&uart1 {
> > > - status = "okay";
> > > -};
> > > diff --git a/arch/arm/dts/vf610-pcm052.dtsi
> > > b/arch/arm/dts/vf610-pcm052.dtsi new file mode 100644
> > > index 0000000000..034290526d
> > > --- /dev/null
> > > +++ b/arch/arm/dts/vf610-pcm052.dtsi
> > > @@ -0,0 +1,266 @@
> > > +// SPDX-License-Identifier: GPL-2.0+ OR X11
> > > +/*
> > > + * (C) Copyright 2018
> > > + * Lukasz Majewski, DENX Software Engineering, lukma at denx.de.
> > > + *
> > > + */
> > > +
> > > +/dts-v1/;
> > > +#include "vf.dtsi"
> > > +#include "vf610-pinfunc.h"
> > > +
> > > +/ {
> > > + chosen {
> > > + stdout-path = &uart1;
> > > + };
> > > +
> > > + aliases {
> > > + spi0 = &qspi0;
> > > + mmc0 = &esdhc1;
> > > + };
> > > +};
> > > +
> > > +&aips0 {
> > > + u-boot,dm-pre-reloc;
> > > +};
> > > +
> > > +&esdhc1 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_esdhc1>;
> > > + bus-width = <4>;
> > > + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> > > + status = "okay";
> > > +};
> > > +
> > > +&fec0 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_eth>;
> > > +
> > > + phy-mode = "rmii";
> > > + status = "okay";
> > > +};
> > > +
> > > +&fec1 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_eth1>;
> > > +
> > > + phy-mode = "rmii";
> > > + status = "okay";
> > > +};
> > > +
> > > +&i2c2 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_i2c2>;
> > > + status = "okay";
> > > +
> > > + eeprom: eeprom at 50 {
> > > + compatible = "atmel,24c256";
> > > + reg = <0x50>;
> > > + pagesize = <64>;
> > > + u-boot,i2c-offset-len = <2>;
> > > + };
> > > +
> > > + m41t62: rtc at 68 {
> > > + compatible = "st,m41t62";
> > > + reg = <0x68>;
> > > + };
> > > +};
> > > +
> > > +&iomuxc {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_ddr>;
> > > +
> > > + pinctrl_ddr: ddrgrp {
> > > + fsl,pins = <
> > > + VF610_PAD_DDR_A15__DDR_A_15
> > > 0x1c0
> > > + VF610_PAD_DDR_A14__DDR_A_14
> > > 0x1c0
> > > + VF610_PAD_DDR_A13__DDR_A_13
> > > 0x1c0
> > > + VF610_PAD_DDR_A12__DDR_A_12
> > > 0x1c0
> > > + VF610_PAD_DDR_A11__DDR_A_11
> > > 0x1c0
> > > + VF610_PAD_DDR_A10__DDR_A_10
> > > 0x1c0
> > > + VF610_PAD_DDR_A9__DDR_A_9
> > > 0x1c0
> > > + VF610_PAD_DDR_A8__DDR_A_8
> > > 0x1c0
> > > + VF610_PAD_DDR_A7__DDR_A_7
> > > 0x1c0
> > > + VF610_PAD_DDR_A6__DDR_A_6
> > > 0x1c0
> > > + VF610_PAD_DDR_A5__DDR_A_5
> > > 0x1c0
> > > + VF610_PAD_DDR_A4__DDR_A_4
> > > 0x1c0
> > > + VF610_PAD_DDR_A3__DDR_A_3
> > > 0x1c0
> > > + VF610_PAD_DDR_A2__DDR_A_2
> > > 0x1c0
> > > + VF610_PAD_DDR_A1__DDR_A_1
> > > 0x1c0
> > > + VF610_PAD_DDR_A0__DDR_A_0
> > > 0x1c0
> > > + VF610_PAD_DDR_BA2__DDR_BA_2
> > > 0x1c0
> > > + VF610_PAD_DDR_BA1__DDR_BA_1
> > > 0x1c0
> > > + VF610_PAD_DDR_BA0__DDR_BA_0
> > > 0x1c0
> > > + VF610_PAD_DDR_CAS__DDR_CAS_B
> > > 0x1c0
> > > + VF610_PAD_DDR_CKE__DDR_CKE_0
> > > 0x1c0
> > > + VF610_PAD_DDR_CLK__DDR_CLK_0
> > > 0x101c0
> > > + VF610_PAD_DDR_CS__DDR_CS_B_0
> > > 0x1c0
> > > + VF610_PAD_DDR_D15__DDR_D_15
> > > 0x1c0
> > > + VF610_PAD_DDR_D14__DDR_D_14
> > > 0x1c0
> > > + VF610_PAD_DDR_D13__DDR_D_13
> > > 0x1c0
> > > + VF610_PAD_DDR_D12__DDR_D_12
> > > 0x1c0
> > > + VF610_PAD_DDR_D11__DDR_D_11
> > > 0x1c0
> > > + VF610_PAD_DDR_D10__DDR_D_10
> > > 0x1c0
> > > + VF610_PAD_DDR_D9__DDR_D_9
> > > 0x1c0
> > > + VF610_PAD_DDR_D8__DDR_D_8
> > > 0x1c0
> > > + VF610_PAD_DDR_D7__DDR_D_7
> > > 0x1c0
> > > + VF610_PAD_DDR_D6__DDR_D_6
> > > 0x1c0
> > > + VF610_PAD_DDR_D5__DDR_D_5
> > > 0x1c0
> > > + VF610_PAD_DDR_D4__DDR_D_4
> > > 0x1c0
> > > + VF610_PAD_DDR_D3__DDR_D_3
> > > 0x1c0
> > > + VF610_PAD_DDR_D2__DDR_D_2
> > > 0x1c0
> > > + VF610_PAD_DDR_D1__DDR_D_1
> > > 0x1c0
> > > + VF610_PAD_DDR_D0__DDR_D_0
> > > 0x1c0
> > > + VF610_PAD_DDR_DQM1__DDR_DQM_1
> > > 0x1c0
> > > + VF610_PAD_DDR_DQM0__DDR_DQM_0
> > > 0x1c0
> > > + VF610_PAD_DDR_DQS1__DDR_DQS_1
> > > 0x101c0
> > > + VF610_PAD_DDR_DQS0__DDR_DQS_0
> > > 0x101c0
> > > + VF610_PAD_DDR_RAS__DDR_RAS_B
> > > 0x1c0
> > > + VF610_PAD_DDR_WE__DDR_WE_B
> > > 0x1c0
> > > + VF610_PAD_DDR_ODT1__DDR_ODT_0
> > > 0x1c0
> > > + VF610_PAD_DDR_ODT0__DDR_ODT_1
> > > 0x1c0
> > > + VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1
> > > 0x1c0
> > > + VF610_PAD_DDR_DDRBYTE0__DDR_DDRBYTE0
> > > 0x1c0
> > > + VF610_PAD_DDR_RESETB
> > > 0x1006c
> > > + >;
> > > + u-boot,dm-pre-reloc;
> > > + };
> > > +
> > > + pinctrl_esdhc1: esdhc1grp {
> > > + fsl,pins = <
> > > + VF610_PAD_PTA24__ESDHC1_CLK
> > > 0x31ef
> > > + VF610_PAD_PTA25__ESDHC1_CMD
> > > 0x31ef
> > > +
> > > VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
> > > +
> > > VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
> > > +
> > > VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
> > > +
> > > VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
> > > + VF610_PAD_PTB28__GPIO_98
> > > 0x219d
> > > + >;
> > > + };
> > > +
> > > + pinctrl_eth: ethgrp {
> > > + fsl,pins = <
> > > + VF610_PAD_PTA6__RMII_CLKIN
> > > 0x30dd
> > > + VF610_PAD_PTC0__ENET_RMII0_MDC
> > > 0x30de
> > > + VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30df
> > > + VF610_PAD_PTC2__ENET_RMII0_CRS
> > > 0x30dd
> > > + VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30dd
> > > + VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30dd
> > > + VF610_PAD_PTC5__ENET_RMII0_RXER 0x30dd
> > > + VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30de
> > > + VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30de
> > > + VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30de
> > > + >;
> > > + };
> > > +
> > > + pinctrl_eth1: eth1grp {
> > > + fsl,pins = <
> > > +
> > > VF610_PAD_PTC9__ENET_RMII1_MDC 0x30de
> > > + VF610_PAD_PTC10__ENET_RMII1_MDIO
> > > 0x30df
> > > + VF610_PAD_PTC11__ENET_RMII1_CRS
> > > 0x30dd
> > > + VF610_PAD_PTC12__ENET_RMII1_RXD1
> > > 0x30dd
> > > + VF610_PAD_PTC13__ENET_RMII1_RXD0
> > > 0x30dd
> > > + VF610_PAD_PTC14__ENET_RMII1_RXER
> > > 0x30dd
> > > + VF610_PAD_PTC15__ENET_RMII1_TXD1
> > > 0x30de
> > > + VF610_PAD_PTC16__ENET_RMII1_TXD0
> > > 0x30de
> > > + VF610_PAD_PTC17__ENET_RMII1_TXEN
> > > 0x30de
> > > + >;
> > > + };
> > > +
> > > + pinctrl_i2c2: i2c2grp {
> > > + fsl,pins = <
> > > + VF610_PAD_PTA22__I2C2_SCL
> > > 0x34df
> > > + VF610_PAD_PTA23__I2C2_SDA
> > > 0x34df
> > > + >;
> > > + };
> > > +
> > > + pinctrl_nfc: nfcgrp {
> > > + fsl,pins = <
> > > + VF610_PAD_PTD31__NF_IO15
> > > 0x28df
> > > + VF610_PAD_PTD30__NF_IO14
> > > 0x28df
> > > + VF610_PAD_PTD29__NF_IO13
> > > 0x28df
> > > + VF610_PAD_PTD28__NF_IO12
> > > 0x28df
> > > + VF610_PAD_PTD27__NF_IO11
> > > 0x28df
> > > + VF610_PAD_PTD26__NF_IO10
> > > 0x28df
> > > + VF610_PAD_PTD25__NF_IO9
> > > 0x28df
> > > + VF610_PAD_PTD24__NF_IO8
> > > 0x28df
> > > + VF610_PAD_PTD23__NF_IO7
> > > 0x28df
> > > + VF610_PAD_PTD22__NF_IO6
> > > 0x28df
> > > + VF610_PAD_PTD21__NF_IO5
> > > 0x28df
> > > + VF610_PAD_PTD20__NF_IO4
> > > 0x28df
> > > + VF610_PAD_PTD19__NF_IO3
> > > 0x28df
> > > + VF610_PAD_PTD18__NF_IO2
> > > 0x28df
> > > + VF610_PAD_PTD17__NF_IO1
> > > 0x28df
> > > + VF610_PAD_PTD16__NF_IO0
> > > 0x28df
> > > + VF610_PAD_PTB24__NF_WE_B
> > > 0x28c2
> > > + VF610_PAD_PTB25__NF_CE0_B
> > > 0x28c2
> > > + VF610_PAD_PTB27__NF_RE_B
> > > 0x28c2
> > > + VF610_PAD_PTC26__NF_RB_B
> > > 0x283d
> > > + VF610_PAD_PTC27__NF_ALE
> > > 0x28c2
> > > + VF610_PAD_PTC28__NF_CLE
> > > 0x28c2
> > > + >;
> > > + };
> > > +
> > > + pinctrl_qspi0: qspi0grp {
> > > + fsl,pins = <
> > > + VF610_PAD_PTD0__QSPI0_A_QSCK 0x397f
> > > + VF610_PAD_PTD1__QSPI0_A_CS0 0x397f
> > > + VF610_PAD_PTD2__QSPI0_A_DATA3 0x397f
> > > + VF610_PAD_PTD3__QSPI0_A_DATA2 0x397f
> > > + VF610_PAD_PTD4__QSPI0_A_DATA1 0x397f
> > > + VF610_PAD_PTD5__QSPI0_A_DATA0 0x397f
> > > + VF610_PAD_PTD7__QSPI0_B_QSCK 0x397f
> > > + VF610_PAD_PTD8__QSPI0_B_CS0 0x397f
> > > + VF610_PAD_PTD11__QSPI0_B_DATA1
> > > 0x397f
> > > + VF610_PAD_PTD12__QSPI0_B_DATA0
> > > 0x397f
> > > + >;
> > > + };
> > > +
> > > + pinctrl_uart1: uart1grp {
> > > + fsl,pins = <
> > > + VF610_PAD_PTB4__UART1_TX
> > > 0x21a2
> > > + VF610_PAD_PTB5__UART1_RX
> > > 0x21a1
> > > + >;
> > > + u-boot,dm-pre-reloc;
> > > + };
> > > +};
> > > +
> > > +&nfc {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_nfc>;
> > > +
> > > + status = "okay";
> > > +};
> > > +
> > > +&uart1 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pinctrl_uart1>;
> > > + u-boot,dm-pre-reloc;
> > > +
> > > + status = "okay";
> > > +};
> >
> > Any/all u-boot,WHATEVER flags go in the $(basename)-u-boot.dtsi file
> > so that $(basename) can be kept as-is from Linux. Looking things over
> > briefly I suspect we have a higher level issue in that we shouldn't
> > have "pcm052.dts" at all and only "vf610-pcm052.dts" or however it
> > syncs up with what's in Linux.
>
> The problem is that pcm052 is not supported / added to Linux (maybe
> there are some dts files for it out of tree - I don't know. As of
> v5.0.-rc2 there weren't any).
Why is it not upstream? What are the plans to push it upstream? But
even then, why is it not following the normal naming convention?
> The work done in this patch simply extracts the bk4 and pcm052 common
> DTS code and creates new vf610-pcm052.dtsi file.
OK.
> Just a side note - the Vybrid structure of DTS/DTSI files in u-boot
> differs considerably from the one in Linux (v5.0-rc2).
> For example in u-boot we do not have vf500.dtsi - the structure (of
> DTS) is trimmed due to constraints of overall u-boot.vyb size (which
> was apparent when I ported some common code from Linux to vf.dtsi file).
We should probably get in sync with Linux then, and use the normal
mechanism to trim out properties.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190115/e704dfd9/attachment.sig>
next prev parent reply other threads:[~2019-01-16 2:33 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-14 14:17 [U-Boot] [PATCH v1 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 01/21] ARM: DTS: vybrid: Add vf-u-boot.dtsi to set 'u-boot, dm-pre-reloc' in soc Lukasz Majewski
2019-01-14 14:30 ` Tom Rini
2019-01-15 7:58 ` Lukasz Majewski
2019-01-16 2:24 ` Tom Rini
2019-01-16 7:33 ` Lukasz Majewski
2019-01-16 12:23 ` Tom Rini
2019-01-14 14:17 ` [U-Boot] [PATCH v1 02/21] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 03/21] net: Kconfig: FEC: Add dependency on VF610 Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 04/21] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 05/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 06/21] vybrid: Define the imx_get_mac_from_fuse() as a __weak function Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 07/21] pcm052: board: Remove "m4go" command as it is superseded by "bootaux" Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 08/21] pcm052: board: vybrid: Update the board name for BK4 device Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 09/21] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 10/21] pcm052: board: cosmetic: Add copyright notice to pcm052.c Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 11/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052.dts) Lukasz Majewski
2019-01-14 14:32 ` Tom Rini
2019-01-15 8:20 ` Lukasz Majewski
2019-01-16 2:33 ` Tom Rini [this message]
2019-01-16 7:47 ` Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 12/21] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 13/21] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 14/21] config: bk4: Update include/configs/bk4r1.h file Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 15/21] pcm052: board: Remove in-board setup code (it is now replaced by DM setup) Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 16/21] config: bk4: Update u-boot script to support recovery via SD card Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 17/21] config: bk4: Update u-boot envs to support NOR memories initial setup Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 18/21] pcm052: bk4: sdcard: Add support for SD card booting/recovery Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 19/21] pcm052: board: Add code to setup LED default states Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 20/21] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function Lukasz Majewski
2019-01-14 14:17 ` [U-Boot] [PATCH v1 21/21] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190116023349.GJ27429@bill-the-cat \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox