From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Wed, 16 Jan 2019 16:14:32 -0500 Subject: [U-Boot] [U-Boot, v2, 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point In-Reply-To: <20181205175136.27119-5-afd@ti.com> References: <20181205175136.27119-5-afd@ti.com> Message-ID: <20190116211432.GA22186@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Dec 05, 2018 at 11:51:33AM -0600, Andrew F. Davis wrote: > Like AM33xx and AM43xx, DRA7xx and AM57xx devices may need to > have an non-standard boot address in memory. This may be due > to the device being a high security variant, which place the > Initial SoftWare (ISW) after certificates and secure software. > > Allow these devices to set this from Kconfig. > > Signed-off-by: Andrew F. Davis > Reviewed-by: Tom Rini > --- > arch/arm/mach-omap2/Kconfig | 13 +++++++++++++ > arch/arm/mach-omap2/am33xx/Kconfig | 15 --------------- > include/configs/ti_omap5_common.h | 2 +- > 3 files changed, 14 insertions(+), 16 deletions(-) Turns out this breaks OMAP3 among others as the question is asked there now and we have no default value (nor I suspect a reasonable one). Thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: