From: Derald D. Woods <woods.technical@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion
Date: Sat, 19 Jan 2019 14:02:29 -0600 [thread overview]
Message-ID: <20190119200231.4504-1-woods.technical@gmail.com> (raw)
In-Reply-To: <20181215073646.28583-1-woods.technical@gmail.com>
This series converts to SPL_GENERATE_ATMEL_PMECC_HEADER Kconfig. The
focus is Kconfig conversion and clean build for the affected boards.
Derald D. Woods (2):
nand: atmel: Replace SYS_NAND_ECC_BASE with ATMEL_BASE_ECC
ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
configs/at91sam9n12ek_mmc_defconfig | 1 +
configs/at91sam9n12ek_nandflash_defconfig | 3 ++
configs/at91sam9n12ek_spiflash_defconfig | 1 +
configs/at91sam9x5ek_dataflash_defconfig | 1 +
configs/at91sam9x5ek_mmc_defconfig | 1 +
configs/at91sam9x5ek_nandflash_defconfig | 3 ++
configs/at91sam9x5ek_spiflash_defconfig | 1 +
configs/sama5d3_xplained_mmc_defconfig | 1 +
configs/sama5d3_xplained_nandflash_defconfig | 3 ++
configs/sama5d3xek_mmc_defconfig | 1 +
configs/sama5d3xek_nandflash_defconfig | 3 ++
configs/sama5d3xek_spiflash_defconfig | 1 +
configs/sama5d4_xplained_mmc_defconfig | 1 +
configs/sama5d4_xplained_nandflash_defconfig | 3 ++
configs/sama5d4_xplained_spiflash_defconfig | 1 +
configs/sama5d4ek_mmc_defconfig | 1 +
configs/sama5d4ek_nandflash_defconfig | 3 ++
configs/sama5d4ek_spiflash_defconfig | 1 +
configs/wb45n_defconfig | 3 ++
configs/wb50n_defconfig | 3 ++
doc/README.atmel_pmecc | 13 +++----
drivers/mtd/nand/raw/Kconfig | 39 ++++++++++++++++++++
drivers/mtd/nand/raw/atmel_nand.c | 19 +++++-----
include/configs/at91sam9n12ek.h | 7 ----
include/configs/at91sam9x5ek.h | 7 ----
include/configs/sama5d3_xplained.h | 7 ----
include/configs/sama5d3xek.h | 7 ----
include/configs/sama5d4_xplained.h | 6 ---
include/configs/sama5d4ek.h | 6 ---
include/configs/snapper9g45.h | 1 -
include/configs/wb45n.h | 7 ----
include/configs/wb50n.h | 6 ---
scripts/config_whitelist.txt | 6 ---
33 files changed, 91 insertions(+), 76 deletions(-)
--
2.20.1
next prev parent reply other threads:[~2019-01-19 20:02 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-05 0:15 [U-Boot] boot.bin on SD Card for SAMA5D3 Xplained Daniel Evans
2018-12-05 14:36 ` Eugen.Hristev at microchip.com
2018-12-05 18:08 ` Daniel Evans
2018-12-05 20:38 ` Robert Nelson
2018-12-06 8:02 ` Eugen.Hristev at microchip.com
2018-12-08 2:37 ` Derald D. Woods
2018-12-08 19:49 ` [U-Boot] [PATCH] ARM: at91: Fix 'boot.bin' generation when CONFIG_SD_BOOT is enabled Derald D. Woods
2018-12-10 8:32 ` Eugen.Hristev at microchip.com
2018-12-10 13:01 ` Derald D. Woods
2018-12-10 14:03 ` Eugen.Hristev at microchip.com
2018-12-10 14:54 ` Derald Woods
2018-12-10 15:14 ` Eugen.Hristev at microchip.com
2018-12-11 5:48 ` Derald D. Woods
2018-12-15 7:36 ` [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig Derald D. Woods
2018-12-28 0:04 ` Derald Woods
2019-01-07 9:40 ` Eugen.Hristev at microchip.com
2019-01-10 1:00 ` Derald Woods
2019-01-11 11:27 ` Eugen.Hristev at microchip.com
2019-01-11 16:51 ` Derald Woods
2019-01-11 16:53 ` Derald Woods
2019-01-18 8:37 ` Eugen.Hristev at microchip.com
2019-01-19 3:26 ` Derald D. Woods
2019-01-19 20:02 ` Derald D. Woods [this message]
2019-01-19 20:02 ` [U-Boot] [PATCH 1/2] nand: atmel: Replace SYS_NAND_ECC_BASE with ATMEL_BASE_ECC Derald D. Woods
2019-01-19 20:02 ` [U-Boot] [PATCH 2/2] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig Derald D. Woods
2019-01-19 23:29 ` [U-Boot] [PATCH 0/2] ARM: at91: NAND PMECC Kconfig conversion Tom Rini
2019-01-20 0:50 ` Derald Woods
2019-01-20 3:37 ` [U-Boot] [PATCH v2 0/1] " Derald D. Woods
2019-01-20 3:37 ` [U-Boot] [PATCH v3 1/1] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig Derald D. Woods
2019-01-20 12:57 ` Tom Rini
2019-01-20 14:25 ` Derald Woods
2019-01-21 16:58 ` [U-Boot] " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190119200231.4504-1-woods.technical@gmail.com \
--to=woods.technical@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox