From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
Date: Tue, 29 Jan 2019 12:03:35 -0500 [thread overview]
Message-ID: <20190129170335.GM30838@bill-the-cat> (raw)
In-Reply-To: <1548761421-8267-9-git-send-email-abel.vesa@nxp.com>
On Tue, Jan 29, 2019 at 11:30:47AM +0000, Abel Vesa wrote:
> This allows us to keep the basic dts[i] files up-to-date with
> the ones in kernel, but at the same time allowing the u-boot
> to add its own properties to the existing nodes.
>
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> ---
> arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi | 6 ++++++
> arch/arm/dts/imx6dl-sabresd-u-boot.dtsi | 6 ++++++
> arch/arm/dts/imx6q-sabreauto-u-boot.dtsi | 6 ++++++
> arch/arm/dts/imx6q-sabresd-u-boot.dtsi | 6 ++++++
> arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi | 23 +++++++++++++++++++++++
> arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi | 14 ++++++++++++++
> arch/arm/dts/imx6qdl-u-boot.dtsi | 4 ++--
> arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi | 6 ++++++
> arch/arm/dts/imx6qp-sabresd-u-boot.dtsi | 6 ++++++
> 9 files changed, 75 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/dts/imx6dl-sabreauto-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx6dl-sabresd-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx6q-sabreauto-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx6q-sabresd-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx6qdl-sabreauto-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx6qp-sabreauto-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx6qp-sabresd-u-boot.dtsi
Since a lot of these files are just #include the main one, is there not
some rule under u_boot_dtsi_options in scripts/Makefile.lib that would
match and pick that main one up automatically?
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190129/2f1fa304/attachment.sig>
next prev parent reply other threads:[~2019-01-29 17:03 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-29 11:30 [U-Boot] [PATCH v2 00/22] mx6sabre: Add DM and SPL FIT support Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 01/22] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 02/22] usb: ehci-mx6: Make regulator DM_REGULATOR dependent Abel Vesa
2019-01-29 13:23 ` Peng Fan
2019-01-29 11:30 ` [U-Boot] [PATCH v2 03/22] configs: imx6sabreauto: Add DM_MMC support Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 04/22] configs: imx6sabreauto: Add DM_USB support Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 05/22] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds Abel Vesa
2019-01-29 13:29 ` Peng Fan
2019-01-30 12:15 ` Abel Vesa
2019-01-29 13:40 ` Adam Ford
2019-01-29 11:30 ` [U-Boot] [PATCH v2 06/22] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL Abel Vesa
2019-01-29 13:30 ` Peng Fan
2019-01-29 11:30 ` [U-Boot] [PATCH v2 07/22] board: mx6sabreauto: " Abel Vesa
2019-01-29 13:30 ` Peng Fan
2019-01-29 11:30 ` [U-Boot] [PATCH v2 08/22] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files Abel Vesa
2019-01-29 13:33 ` Peng Fan
2019-01-30 8:22 ` Abel Vesa
2019-01-29 17:03 ` Tom Rini [this message]
2019-01-30 11:15 ` Abel Vesa
2019-01-29 11:30 ` [U-Boot] [PATCH v2 09/22] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] Abel Vesa
2019-01-29 13:34 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 10/22] arm: imx: Add FIT SPL its Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 11/22] configs: mx6sabreauto: Add SPL FIT and DM support Abel Vesa
2019-01-29 13:38 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 12/22] configs: mx6sabresd: " Abel Vesa
2019-01-29 13:39 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 13/22] mx6sabreauto: Add DM_GPIO support Abel Vesa
2019-01-29 13:40 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 14/22] mx6sabresd: " Abel Vesa
2019-01-29 13:40 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 15/22] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs Abel Vesa
2019-01-29 13:41 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 16/22] configs: mx6sabresd: " Abel Vesa
2019-01-29 13:41 ` Peng Fan
2019-01-29 11:35 ` [U-Boot] [PATCH v2 17/22] board: mx6sabreauto: Remove the non-DM code Abel Vesa
2019-01-29 13:43 ` Peng Fan
2019-01-30 8:19 ` Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 18/22] board: mx6sabresd: Remove " Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 19/22] board: mx6sabresd: Remove the enet reset gpio handling Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 20/22] configs: mx6sabresd: Reduce size for SPL by disabling SPL_DOS and SPL_EFI Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 21/22] board: mx6sabreauto: Update README with the SPL DM FIT info Abel Vesa
2019-01-29 11:35 ` [U-Boot] [PATCH v2 22/22] board: mx6sabresd: " Abel Vesa
2019-01-29 13:37 ` [U-Boot] [PATCH v2 10/22] arm: imx: Add FIT SPL its Peng Fan
2019-01-29 14:04 ` Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190129170335.GM30838@bill-the-cat \
--to=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox