[U-Boot] [PATCH v1 1/2] doc: Fix CONFIG_OF_SEPARATE description

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Tue, Jan 08, 2019 at 04:17:42PM +0200, Andy Shevchenko wrote:
> CONFIG_OF_SEPARATE description is not in align with actual code in Makefile and
> thus has misleading instructions and explanation.
> 
> Make it aligned with the actual code.

Bin, is it possible to see this for the next release?

> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  doc/README.fdt-control | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/doc/README.fdt-control b/doc/README.fdt-control
> index 446401c9e9..e53cf51875 100644
> --- a/doc/README.fdt-control
> +++ b/doc/README.fdt-control
> @@ -122,13 +122,14 @@ the U-Boot image (including u-boot.bin). This is suitable for debugging
>  and development only and is not recommended for production devices.
>  
>  If CONFIG_OF_SEPARATE is defined, then it will be built and placed in
> -a u-boot.dtb file alongside u-boot.bin. A common approach is then to
> +a u-boot.dtb file alongside u-boot-nodtb.bin. A common approach is then to
>  join the two:
>  
> -	cat u-boot.bin u-boot.dtb >image.bin
> +	cat u-boot-nodtb.bin u-boot.dtb >image.bin
>  
>  and then flash image.bin onto your board. Note that U-Boot creates
> -u-boot-dtb.bin which does the above step for you also. If you are using
> +u-boot-dtb.bin which does the above step for you also. Resulting
> +u-boot.bin is a copy of u-boot-dtb.bin in this case. If you are using
>  CONFIG_SPL_FRAMEWORK, then u-boot.img will be built to include the device
>  tree binary.
>  
> -- 
> 2.19.2
> 

-- 
With Best Regards,
Andy Shevchenko