[U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid

[Lukasz Majewski <lukma@denx.de>]

Hi Stefan,

> On 20.01.2019 14:34, Lukasz Majewski wrote:
> > Provide function to enable I2C2 clock for vf610 (BK4) - in the
> > generic code.  
> 
> Can you split this in two commits, one adding enable_i2c_clk and the
> second removing board specific clock enable?

This particular commit only adds new clock to generic driver.

There is a commit latter, which is removing the board file:
[PATCH v2 15/21] pcm052: board: Remove in-board setup code (it is now
replaced by DM setup)

The approach as is is optimal - I do not see any build errors for
separate patches.

> 
> Also our module seems to use I2C0, could you add that instance to the
> supported instances too? It should be rather trivial:
> 
> 
> 	switch (i2c_num) {
> 	case 0:
> 		clrsetbits_le32(&ccm->ccgr4, CCM_CCGR4_I2C0_CTRL_MASK,
> 				CCM_CCGR4_I2C0_CTRL_MASK);

The problem is that this change is not related to BK4/PCM052 ... or
"our module" is a PCM052?

If this is some custom board / module (not pcm052) then I would prefer
to have this change as a separate (not related to this patch set) patch.

> ...
> 
> 
> --
> Stefan
> 
> > 
> > Signed-off-by: Lukasz Majewski <lukma@denx.de>
> > ---
> > 
> > Changes in v2: None
> > 
> >  arch/arm/cpu/armv7/vf610/generic.c      | 19 +++++++++++++++++++
> >  arch/arm/include/asm/arch-vf610/clock.h |  3 +++
> >  board/phytec/pcm052/pcm052.c            |  2 +-
> >  3 files changed, 23 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/cpu/armv7/vf610/generic.c
> > b/arch/arm/cpu/armv7/vf610/generic.c
> > index cbd3391918..f1e6c7816e 100644
> > --- a/arch/arm/cpu/armv7/vf610/generic.c
> > +++ b/arch/arm/cpu/armv7/vf610/generic.c
> > @@ -375,3 +375,22 @@ void enable_caches(void)
> >  	mmu_set_region_dcache_behaviour(IRAM_BASE_ADDR, IRAM_SIZE,
> > option); }
> >  #endif
> > +
> > +#ifdef CONFIG_SYS_I2C_MXC
> > +/* i2c_num can be from 0 - 3 */
> > +int enable_i2c_clk(unsigned char enable, unsigned int i2c_num)
> > +{
> > +	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
> > +
> > +	switch (i2c_num) {
> > +	case 2:
> > +		clrsetbits_le32(&ccm->ccgr10,
> > CCM_CCGR10_I2C2_CTRL_MASK,
> > +				CCM_CCGR10_I2C2_CTRL_MASK);
> > +		break;
> > +	default:
> > +		return -EINVAL;
> > +	}
> > +
> > +	return 0;
> > +}
> > +#endif
> > diff --git a/arch/arm/include/asm/arch-vf610/clock.h
> > b/arch/arm/include/asm/arch-vf610/clock.h
> > index 3bd73a01f3..72184fd608 100644
> > --- a/arch/arm/include/asm/arch-vf610/clock.h
> > +++ b/arch/arm/include/asm/arch-vf610/clock.h
> > @@ -22,6 +22,9 @@ enum mxc_clock {
> >  void enable_ocotp_clk(unsigned char enable);
> >  unsigned int mxc_get_clock(enum mxc_clock clk);
> >  u32 get_lpuart_clk(void);
> > +#ifdef CONFIG_SYS_I2C_MXC
> > +int enable_i2c_clk(unsigned char enable, unsigned int i2c_num);
> > +#endif
> >  
> >  #define imx_get_fecclk() mxc_get_clock(MXC_FEC_CLK)
> >  
> > diff --git a/board/phytec/pcm052/pcm052.c
> > b/board/phytec/pcm052/pcm052.c index f988af2abc..cfc8009102 100644
> > --- a/board/phytec/pcm052/pcm052.c
> > +++ b/board/phytec/pcm052/pcm052.c
> > @@ -485,7 +485,7 @@ static void clock_init(void)
> >  	clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
> >  			CCM_CCGR9_FEC0_CTRL_MASK |
> > CCM_CCGR9_FEC1_CTRL_MASK); clrsetbits_le32(&ccm->ccgr10,
> > CCM_REG_CTRL_MASK,
> > -			CCM_CCGR10_NFC_CTRL_MASK |
> > CCM_CCGR10_I2C2_CTRL_MASK);
> > +			CCM_CCGR10_NFC_CTRL_MASK);
> >  
> >  	clrsetbits_le32(&anadig->pll2_ctrl,
> > ANADIG_PLL2_CTRL_POWERDOWN, ANADIG_PLL2_CTRL_ENABLE |
> > ANADIG_PLL2_CTRL_DIV_SELECT);  




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190201/28e7d8d1/attachment.sig>