From mboxrd@z Thu Jan 1 00:00:00 1970 From: Faiz Abbas Date: Tue, 12 Feb 2019 14:28:14 +0530 Subject: [U-Boot] [PATCH v3 08/13] arm: dts: k3: Add phy specific properties to SD card node In-Reply-To: <20190212085819.31395-1-faiz_abbas@ti.com> References: <20190212085819.31395-1-faiz_abbas@ti.com> Message-ID: <20190212085819.31395-9-faiz_abbas@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de With changes in the driver requiring phy related properties, add the same for the SD card node to prevent breaking boot with the driver update. Signed-off-by: Faiz Abbas Reviewed-by: Tom Rini --- arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi index f53fe463ac..95e3aad646 100644 --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -33,6 +33,8 @@ clocks = <&k3_clks 48 1>; power-domains = <&k3_pds 48>; max-frequency = <25000000>; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; }; }; @@ -129,4 +131,5 @@ pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; sdhci-caps-mask = <0x7 0x0>; + ti,driver-strength-ohm = <50>; }; -- 2.19.2