public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 0/9] arm: exynos: Fix reboot on Odroid HC1
Date: Wed, 13 Feb 2019 17:46:39 +0100	[thread overview]
Message-ID: <20190213164648.26579-1-krzk@kernel.org> (raw)

Hi,

Changes since v1
================
1. Move fixes to beginning of patchset.
2. Patch 3: Rework the idea - split revision detection to be executed later.
3. Patch 4: New patch.
4. Patch 6: Apply Simon's comments.
5. Patch 6: Do not delay when changing voltage if regulator is disabled.
6. Patch 6: Do not delay when disabling the regulator.


Description
===========
Odroid HC1 does not reboot properly (at least from SD card but
I do not expect difference on eMMC), if LDO4/VDD_ADC was turned
off by Linux kernel.  This condition happens so far always, because
Linux kernel did not enable ADC on Odroid HC1, therefore the
VDD_ADC regulator was turned off as unused.

The issue is in detection of revision which later is used to load
proper DTB.

The revision is obtained by ADC read of a voltage depending on VDD_ADC.
Therefore:
1. VDD_ADC has to be turned on (but board detection happens before
   power is initialized),
2. Turning VDD_ADC should wait with ramp delay,
3. Reading the value from ADC should wait for it to stabilize.

Tested on Odroid XU3-Lite and Odroid HC1.

Commends and testing are welcomed.

Best regards,
Krzysztof


Krzysztof Kozlowski (9):
  adc: exynos-adc: Fix wrong bit operation used to stop the ADC
  power: regulator: s2mps11: Fix step for LDO27 and LDO35
  arm: exynos: Detect revision later, when all resources are ready
  arm: exynos: odroid-xu3: Display info late to have proper type
  arm: exynos: Wait till ADC stabilizes before checking Odroid HC1
    revision
  regulator: Add support for ramp delay
  power: regulator: s2mps11: Add enable delay
  arm: dts: exynos: Add supply for ADC block to Odroid XU3 family
  arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid
    XU3 family

 arch/arm/dts/exynos5422-odroidxu3.dts         | 20 +++++++
 board/samsung/common/board.c                  | 15 ++++-
 board/samsung/common/exynos5-dt-types.c       | 58 +++++++++++++++++--
 board/samsung/odroid/odroid.c                 |  8 +++
 configs/odroid-xu3_defconfig                  |  2 +
 .../regulator/regulator.txt                   |  2 +
 drivers/adc/exynos-adc.c                      |  2 +-
 drivers/power/regulator/regulator-uclass.c    | 47 ++++++++++++++-
 drivers/power/regulator/s2mps11_regulator.c   | 13 ++++-
 include/power/regulator.h                     |  2 +
 include/samsung/misc.h                        |  1 +
 11 files changed, 160 insertions(+), 10 deletions(-)

-- 
2.17.1

             reply	other threads:[~2019-02-13 16:46 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-13 16:46 Krzysztof Kozlowski [this message]
2019-02-13 16:46 ` [U-Boot] [PATCH v2 1/9] adc: exynos-adc: Fix wrong bit operation used to stop the ADC Krzysztof Kozlowski
2019-02-15  6:54   ` Lukasz Majewski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 2/9] power: regulator: s2mps11: Fix step for LDO27 and LDO35 Krzysztof Kozlowski
2019-02-15  6:55   ` Lukasz Majewski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 3/9] arm: exynos: Detect revision later, when all resources are ready Krzysztof Kozlowski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 4/9] arm: exynos: odroid-xu3: Display info late to have proper type Krzysztof Kozlowski
2019-02-14  7:37   ` Krzysztof Kozlowski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision Krzysztof Kozlowski
2019-02-15  7:15   ` Lukasz Majewski
2019-02-15 10:06     ` Krzysztof Kozlowski
2019-02-16  9:28     ` Krzysztof Kozlowski
2019-02-17 22:31       ` Lukasz Majewski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 6/9] regulator: Add support for ramp delay Krzysztof Kozlowski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay Krzysztof Kozlowski
2019-02-15  7:03   ` Lukasz Majewski
2019-02-15 10:11     ` Krzysztof Kozlowski
2019-02-15 10:55       ` Lukasz Majewski
2019-02-15 17:11   ` Simon Glass
2019-02-16  8:37     ` Krzysztof Kozlowski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 8/9] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family Krzysztof Kozlowski
2019-02-15  7:01   ` Lukasz Majewski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 9/9] arm: dts: exynos: Add ramp delay property to LDO regulators " Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190213164648.26579-1-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox