From: Krzysztof Kozlowski <krzk@kernel.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/9] arm: exynos: odroid-xu3: Display info late to have proper type
Date: Wed, 13 Feb 2019 17:46:43 +0100 [thread overview]
Message-ID: <20190213164648.26579-5-krzk@kernel.org> (raw)
In-Reply-To: <20190213164648.26579-1-krzk@kernel.org>
From: Krzysztof Kozlowski <krzysztof.kozlowski@proceq.com>
Printing the "Type" of board requires proper detection of revision which
can happen only late because regulators are needed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@proceq.com>
---
board/samsung/common/board.c | 2 +-
configs/odroid-xu3_defconfig | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index 52a2764a1919..632732288e73 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -249,7 +249,7 @@ int board_eth_init(bd_t *bis)
return 0;
}
-#ifdef CONFIG_DISPLAY_BOARDINFO
+#if defined(CONFIG_DISPLAY_BOARDINFO) || defined(CONFIG_DISPLAY_BOARDINFO_LATE)
int checkboard(void)
{
if (IS_ENABLED(CONFIG_BOARD_TYPES)) {
diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
index f6f05b294833..57aca5e015fc 100644
--- a/configs/odroid-xu3_defconfig
+++ b/configs/odroid-xu3_defconfig
@@ -11,6 +11,8 @@ CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_SYS_PROMPT="ODROID-XU3 # "
CONFIG_CMD_THOR_DOWNLOAD=y
--
2.17.1
next prev parent reply other threads:[~2019-02-13 16:46 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-13 16:46 [U-Boot] [PATCH v2 0/9] arm: exynos: Fix reboot on Odroid HC1 Krzysztof Kozlowski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 1/9] adc: exynos-adc: Fix wrong bit operation used to stop the ADC Krzysztof Kozlowski
2019-02-15 6:54 ` Lukasz Majewski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 2/9] power: regulator: s2mps11: Fix step for LDO27 and LDO35 Krzysztof Kozlowski
2019-02-15 6:55 ` Lukasz Majewski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 3/9] arm: exynos: Detect revision later, when all resources are ready Krzysztof Kozlowski
2019-02-13 16:46 ` Krzysztof Kozlowski [this message]
2019-02-14 7:37 ` [U-Boot] [PATCH v2 4/9] arm: exynos: odroid-xu3: Display info late to have proper type Krzysztof Kozlowski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision Krzysztof Kozlowski
2019-02-15 7:15 ` Lukasz Majewski
2019-02-15 10:06 ` Krzysztof Kozlowski
2019-02-16 9:28 ` Krzysztof Kozlowski
2019-02-17 22:31 ` Lukasz Majewski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 6/9] regulator: Add support for ramp delay Krzysztof Kozlowski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay Krzysztof Kozlowski
2019-02-15 7:03 ` Lukasz Majewski
2019-02-15 10:11 ` Krzysztof Kozlowski
2019-02-15 10:55 ` Lukasz Majewski
2019-02-15 17:11 ` Simon Glass
2019-02-16 8:37 ` Krzysztof Kozlowski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 8/9] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family Krzysztof Kozlowski
2019-02-15 7:01 ` Lukasz Majewski
2019-02-13 16:46 ` [U-Boot] [PATCH v2 9/9] arm: dts: exynos: Add ramp delay property to LDO regulators " Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190213164648.26579-5-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox