From: sbabic at denx.de <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-Boot, v4, 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL
Date: Sat, 16 Feb 2019 10:26:20 +0000 (UTC) [thread overview]
Message-ID: <20190216102626.26E2AC21ECC@lists.denx.de> (raw)
In-Reply-To: <1549039198-16674-8-git-send-email-abel.vesa@nxp.com> Estevam <fabio.estevam@nxp.com>, "u-boot@lists.denx.de" <u-boot@lists.denx.de>, dl-uboot-imx <uboot-imx@nxp.com>, Peng Fan <peng.fan@nxp.com>
> This matches one of the following three boards (or fails):
> - imx6q-sabresd
> - imx6qp-sabresd
> - imx6dl-sabresd
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Reviewed-by: Lukasz Majewski <lukma@denx.de>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2019-02-16 10:26 UTC|newest]
Thread overview: 654+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-18 8:58 [U-Boot] [PATCH] imx8: cpu: restrict checking ROM passover info for revA Peng Fan
[not found] ` <uboot-imx@nxp.com>
2019-01-30 8:57 ` [U-Boot] [U-Boot, V2, 06/10] dts: imx8qxp-mek: introduce u-boot dtsi sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] imx8: cpu: restrict checking ROM passover info for revA sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,08/10] imx: build flash.bin for i.MX8 sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,10/10] imx8qxp: mek: update README sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,09/10] imx8qxp: mek: default enable SPL sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,01/10] imx8qxp: add SUPPORT_SPL option sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,03/10] arm: imx: build mach-imx for i.MX8 sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, V2, 07/10] imx: mkimage_fit_atf: introduce BL33_BASE_ADDR sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot,V2,04/10] gpio: introduce CONFIG_SPL_DM_PCA953X sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot,V2,05/10] spl: imx8: add spl boot device sbabic at denx.de
2019-01-30 9:15 ` [U-Boot] [U-Boot,V2,02/10] imx8: scu: use dedicated MU for SPL sbabic at denx.de
[not found] ` <peng.fan@nxp.com>
2019-02-16 10:26 ` [U-Boot] [U-Boot,v4,18/20] board: mx6sabresd: Remove non-DM code sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 17/20] board: mx6sabreauto: Remove the " sbabic at denx.de
2019-02-16 10:26 ` sbabic at denx.de [this message]
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 05/20] configs: imx6sabreauto: Add DM_USB support sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 12/20] configs: mx6sabresd: Add SPL FIT and DM support sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 04/20] configs: imx6sabreauto: Add DM_MMC support sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 19/20] board: mx6sabresd: Remove the enet reset gpio handling sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot,v4,13/20] mx6sabreauto: Add DM_GPIO support sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 11/20] configs: mx6sabreauto: Add SPL FIT and DM support sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot,v4,14/20] mx6sabresd: Add DM_GPIO support sbabic at denx.de
2019-02-16 10:45 ` [U-Boot] [U-Boot, v4, 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 19/22] arm: vf610: add uart2 clock/pinmux support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,v2,02/22] vf610: ddrmc: add missing include sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,v2,03/22] imx: bootaux: add dependency on vf610 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,RESEND,07/10] clk: imx8: add i.MX8QM clk driver sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] ARM: imx: Fix typo in select option for ZMX25 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,RESEND,05/10] imx8: add cpu support sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] imx: 8qxp_mek: fix fdt_file and console sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,2/2] mxc_ocotp: Disable fuse sense for imx8mq B1 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, 1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,3/8] imx8qxp: mek: Enable CMD_FUSE sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 03/14] ARM: Enable CONFIG_DM_MMC and CONFIG_DM_BLK on HSC and DDC boards sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, RESEND, 03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,RESEND,10/10] imx: support i.MX8QM MEK board sbabic at denx.de
2019-04-26 10:50 ` Marcel Ziswiler
2019-04-26 10:56 ` Stefano Babic
2019-04-26 9:37 ` [U-Boot] [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, RESEND, 01/10] pinctrl: imx8: add i.MX8QM compatible sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] imx: i.MX8MQ: clear ocotp error bit sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 11/14] ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boards sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, RESEND, 09/10] misc: imx8: scu: add i.MX8QM support sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, RESEND, 06/10] clk: imx8: split code into common and soc specific part sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot,2/8] imx8: fuse: add fuse driver sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] ddr: imx8m: hide i.MX8M DDR options from device driver entry sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] imx8qxp: mek: enable dm-spl for pm sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, RESEND, 04/10] arm: dts: introduce dtsi for i.MX8QM sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, RESEND, 02/10] dt-bindings: pinctrl: add i.MX8QM pads definition sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot,RESEND,08/10] imx8: imx8-pins: add i.MX8QM sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] imx: add lowlevel init for ARM64 sbabic at denx.de
2019-04-26 9:55 ` [U-Boot] [U-Boot,8/8] imx8: mek: move HUSH_PARSER to defconfig sbabic at denx.de
-- strict thread matches above, loose matches on Subject: below --
2019-05-12 20:43 [U-Boot] [PATCH] ARM: imx: apalis_imx6: Drop ad-hoc SATA binding Marek Vasut
2019-05-23 10:48 ` Marcel Ziswiler
2019-04-22 10:41 [U-Boot] [PATCH] ddr: imx8m: hide i.MX8M DDR options from device driver entry Peng Fan
2019-04-17 23:57 [U-Boot] [PATCH v3 00/14] colibri-imx6ull device tree enablement and driver model conversion Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 02/14] tdx-cfg-block: simplify i.MX 6 module detection Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 03/14] colibri-imx6ull: set module variant depending on config block Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 05/14] colibri-imx6ull: fix ethernet phy power on Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 06/14] board: imx6ull: Add disable PMIC_STBY_REQ Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 07/14] colibri-imx6ull: configuration clean-up Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 09/14] colibri-imx6ull: migrate mmc to using driver model Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 10/14] colibri-imx6ull: migrate usb " Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 11/14] colibri-imx6ull: migrate fec " Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 14/14] ARM: dts: colibri-imx6ull: update device tree Marcel Ziswiler
2019-04-17 23:47 [U-Boot] [PATCH v3] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings Marcel Ziswiler
2019-04-17 9:41 [U-Boot] [PATCH] imx: i.MX8MQ: clear ocotp error bit Peng Fan
2019-04-17 9:41 ` [U-Boot] [PATCH 1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0 Peng Fan
2019-04-17 9:41 ` [U-Boot] [PATCH 2/2] mxc_ocotp: Disable fuse sense for imx8mq B1 Peng Fan
2019-04-15 12:00 [U-Boot] [PATCH] imx: 8qxp_mek: fix fdt_file and console Peng Fan
2019-04-15 13:31 ` Fabio Estevam
2019-04-26 18:42 ` [U-Boot] [REGRESSION] " Marcel Ziswiler
2019-04-27 0:11 ` Peng Fan
2019-04-15 9:13 [U-Boot] [PATCH v2 1/2] ARM: imx6: DHCOM i.MX6 PDK: use Kconfig for inclusion of DDR calibration Ludwig Zenz
2019-04-15 5:20 [U-Boot] [PATCH] imx: add lowlevel init for ARM64 Peng Fan
2019-04-26 18:38 ` [U-Boot] [REGRESSION] " Marcel Ziswiler
2019-04-26 23:58 ` Peng Fan
2019-04-28 16:52 ` Stefano Babic
2019-04-28 18:24 ` Joe Hershberger
2019-04-28 23:33 ` Marcel Ziswiler
2019-04-13 8:21 [U-Boot] [PATCH] ARM: imx: Fix typo in select option for ZMX25 Chris Packham
2019-04-15 16:32 ` Fabio Estevam
2019-04-15 16:50 ` Stefano Babic
2019-04-12 7:54 [U-Boot] [PATCH 1/8] imx: sip: add call_imx_sip_ret2 Peng Fan
2019-04-12 7:54 ` [U-Boot] [PATCH 2/8] imx8: fuse: add fuse driver Peng Fan
2019-04-12 7:54 ` [U-Boot] [PATCH 3/8] imx8qxp: mek: Enable CMD_FUSE Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 4/8] misc: imx8: add sc_misc_get_temp Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 5/8] thermal: add i.MX8 thermal driver Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 6/8] imx8: cpu: get temperature when print cpu desc Peng Fan
2019-04-25 10:35 ` Stefano Babic
2019-04-25 13:46 ` Peng Fan
2019-04-25 14:23 ` Stefano Babic
2019-04-12 7:55 ` [U-Boot] [PATCH 7/8] imx: imx8dx/qxp: enable thermal Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 8/8] imx8: mek: move HUSH_PARSER to defconfig Peng Fan
2019-04-09 15:25 [U-Boot] [PATCH v2 0/5] colibri imx8qxp 2gb wb it v1.0b module support Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 1/5] misc: imx8: remove duplicates from scfw api Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 2/5] arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3 Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 3/5] board: toradex: tdx-cfg-block: clean-up sku handling Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 4/5] board: toradex: tdx-cfg-block: add new skus Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 5/5] board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support Marcel Ziswiler
2019-04-11 10:47 ` Igor Opaniuk
2019-04-26 9:20 ` Marcel Ziswiler
2019-04-26 9:46 ` Stefano Babic
2019-04-26 9:58 ` Marcel Ziswiler
2019-04-26 10:39 ` Stefano Babic
2019-04-25 10:48 ` Stefano Babic
2019-04-25 12:35 ` Marcel Ziswiler
2019-04-25 14:52 ` Stefano Babic
2019-04-26 2:10 ` Peng Fan
2019-04-26 8:38 ` Stefano Babic
2019-04-26 8:53 ` Peng Fan
2019-04-26 8:54 ` Marcel Ziswiler
2019-04-26 9:03 ` Peng Fan
2019-04-26 9:38 ` Marcel Ziswiler
2019-04-26 9:59 ` Peng Fan
2019-04-09 15:24 [U-Boot] [PATCH v2 00/14] colibri-imx6ull device tree enablement and driver model conversion Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 02/14] tdx-cfg-block: simplify i.MX 6 module detection Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 03/14] colibri-imx6ull: set module variant depending on config block Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 05/14] colibri-imx6ull: fix ethernet phy power on Marcel Ziswiler
2019-04-11 8:05 ` Igor Opaniuk
2019-04-09 15:24 ` [U-Boot] [PATCH v2 06/14] board: imx6ull: Add disable PMIC_STBY_REQ Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 07/14] colibri-imx6ull: configuration clean-up Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 09/14] colibri-imx6ull: migrate mmc to using driver model Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 10/14] colibri-imx6ull: migrate usb " Marcel Ziswiler
2019-04-17 7:58 ` Igor Opaniuk
2019-04-09 15:24 ` [U-Boot] [PATCH v2 11/14] colibri-imx6ull: migrate fec " Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 14/14] ARM: dts: colibri-imx6ull: update device tree Marcel Ziswiler
2019-04-04 10:26 [U-Boot] [imx-next PATCH v1 00/14] imx: Fully convert HSC|DDC K+P i.MX53 based boards to use DM/DTS Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 01/14] ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTS Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 02/14] DTS: Add esdhc3 device tree description tuning for HSC|DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 03/14] ARM: Enable CONFIG_DM_MMC and CONFIG_DM_BLK on HSC and DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 04/14] ARM: defconfig: Move CONFIG_FSL_ESDHC to Kconfig Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 05/14] ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 06/14] ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic file Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 07/14] DTS: Provide USB host DTS description for i.MX53 devices Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 08/14] DTS: Enable USB host support (including regulators) on HSC|DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 09/14] ARM: Remove EHCI specific code from HSC|DDC board file Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 10/14] USB: DM: Convert i.MX5 ehci code to driver model Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 11/14] ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 12/14] ARM: config: Remove not needed CONFIG_MXC_USB_PORT define Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 13/14] Convert CONFIG_USB_EHCI_MX5 to Kconfig Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 14/14] boot.src: Provide dsa_core.blacklist bootarg when booting via NFS Lukasz Majewski
2019-03-28 22:25 [U-Boot] [PATCH v1] colibri_vf: fix tab vs. spaces Marcel Ziswiler
2019-03-29 11:27 ` Igor Opaniuk
2019-03-28 22:24 [U-Boot] [PATCH v1] colibri_vf: fix ethernet by adding explicit phy node Marcel Ziswiler
2019-03-29 5:54 ` Hannes Schmelzer
2019-03-29 11:25 ` Igor Opaniuk
2019-03-25 16:24 [U-Boot] [PATCH v2 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 01/22] Add missing space in comment Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 02/22] vf610: ddrmc: add missing include Marcel Ziswiler
2019-04-01 8:18 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 03/22] imx: bootaux: add dependency on vf610 Marcel Ziswiler
2019-04-01 8:18 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig Marcel Ziswiler
[not found] ` <swarren@nvidia.com>
2019-04-01 8:18 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment Marcel Ziswiler
2019-04-01 8:19 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 06/22] configs: colibri_vf: limit size of malloc() pool before relocation Marcel Ziswiler
2019-04-01 8:19 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 08/22] ARM: dts: colibri_vf: update device trees Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 09/22] configs: colibri_vf: disable obscure options Marcel Ziswiler
2019-03-28 16:58 ` Igor Opaniuk
2019-03-29 9:08 ` Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
2019-03-28 15:09 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model Marcel Ziswiler
2019-03-28 14:43 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 12/22] config: colibri_vf: use macros from linux/sizes.h Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 13/22] colibri_vf: add distroboot support Marcel Ziswiler
2019-03-28 15:01 ` Igor Opaniuk
2019-03-28 15:20 ` Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 14/22] colibri_vf: set fdtfile for distroboot Marcel Ziswiler
2019-03-28 15:06 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 15/22] colibri_vf: sync the board info message Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 16/22] colibri_vf: enable user debug by default Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 17/22] colibri_vf: disable undefined instruction events in user debug Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 18/22] config: colibri_vf: enable mtd partitions via dt Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 19/22] arm: vf610: add uart2 clock/pinmux support Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 20/22] colibri_vf: adjust timing according to data sheet Marcel Ziswiler
2019-03-28 16:41 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 21/22] colibri_vf: use leveling evaluated by DDR validation tools Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 22/22] colibri_vf: fix sdboot for vybrid modules Marcel Ziswiler
2019-03-18 22:29 [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 01/17] video: ipuv3: add DM_VIDEO support Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 02/17] video: move ipuv3 files to subdirectory Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 03/17] imx: move CONFIG_VIDEO_IPUV3 to defconfigs Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 04/17] imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 05/17] apalis_imx6: convert to DM_VIDEO Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 06/17] imx6: icore: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 07/17] imx6: ge_bx50v3: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 08/17] colibri_imx6: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 09/17] mx6sabresd: " Anatolij Gustschin
2019-09-16 18:18 ` Fabio Estevam
2019-09-16 19:21 ` Anatolij Gustschin
2019-09-16 19:50 ` Anatolij Gustschin
2019-09-17 12:32 ` Fabio Estevam
2019-09-17 21:42 ` Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 10/17] mx6sabreauto: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 11/17] imx6: wandboard: add device tree Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 12/17] imx6: wandboard: convert to DM_GPIO and enable pinctrl driver Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 13/17] imx6: wandboard: convert to DM_USB Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 14/17] imx6: wandboard: convert to DM_VIDEO Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 15/17] imx6: wandboard: convert to DM_PMIC Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 16/17] imx6: wandboard: convert to DM_I2C Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 17/17] imx6: wandboard: convert to DM_MMC Anatolij Gustschin
2019-03-18 22:37 ` [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO Anatolij Gustschin
2019-03-20 13:25 ` Fabio Estevam
2019-03-20 13:38 ` Anatolij Gustschin
2019-03-20 13:40 ` Fabio Estevam
2019-03-07 12:43 [U-Boot] [PATCH] imx8qxp: mek: enable dm-spl for pm Peng Fan
2019-03-18 8:43 ` Peng Fan
2019-04-09 12:47 ` Peng Fan
2019-03-05 2:32 [U-Boot] [PATCH RESEND 01/10] pinctrl: imx8: add i.MX8QM compatible Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 02/10] dt-bindings: pinctrl: add i.MX8QM pads definition Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 04/10] arm: dts: introduce dtsi for i.MX8QM Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 05/10] imx8: add cpu support Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 06/10] clk: imx8: split code into common and soc specific part Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 07/10] clk: imx8: add i.MX8QM clk driver Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 08/10] imx8: imx8-pins: add i.MX8QM Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 09/10] misc: imx8: scu: add i.MX8QM support Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 10/10] imx: support i.MX8QM MEK board Peng Fan
2019-04-09 12:48 ` Peng Fan
2019-03-18 8:42 ` [U-Boot] [PATCH RESEND 01/10] pinctrl: imx8: add i.MX8QM compatible Peng Fan
2019-03-01 12:10 [U-Boot] [PATCH 00/10] tbs2910 fixes and driver model conversion Soeren Moch
2019-03-01 12:10 ` [U-Boot] [PATCH 01/10] board: tbs2910: Fix default environment Soeren Moch
2019-03-14 19:16 ` Soeren Moch
2019-03-14 19:18 ` Stefano Babic
2019-03-01 12:10 ` [U-Boot] [PATCH 02/10] board: tbs2910: Remove efi loader support in defconfig to reduce u-boot size Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 03/10] board: tbs2910: Add device tree Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot,03/10] " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 04/10] board: tbs2910: Add pinctrl driver and convert gpio to driver model Soeren Moch
2019-04-01 8:52 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 05/10] board: tbs2910: Convert usb " Soeren Moch
2019-04-01 8:52 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 06/10] board: tbs2910: Convert i2c and rtc " Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 07/10] ata: dwc_ahsata: Fix sector reports for large disks Soeren Moch
2019-04-01 8:52 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 08/10] ata: dwc_ahsata: Add ahci driver model support Soeren Moch
2019-03-07 8:33 ` Soeren Moch
2019-03-08 20:19 ` Soeren Moch
[not found] ` <smoch@web.de>
[not found] ` <marcel@ziswiler.com>
2019-04-01 8:59 ` [U-Boot] [U-Boot, 09/10] board: tbs2910: Convert sata to ahci driver model sbabic at denx.de
2019-03-01 12:11 ` [U-Boot] [PATCH " Soeren Moch
2019-03-01 12:11 ` [U-Boot] [PATCH 10/10] board: tbs2910: Convert mmc to " Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-13 21:46 [U-Boot] [PATCH v4 00/22] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 02/22] net: Kconfig: FEC: Add dependency on VF610 Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 05/22] pcm052: board: Do not enable I2C2 code in the board file Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux" Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 08/22] pcm052: board: vybrid: Update the board name for BK4 device Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 15/22] config: bk4: Update include/configs/bk4r1.h file Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup) Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 17/22] config: bk4: Update u-boot script to support recovery via SD card Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 20/22] pcm052: board: Add code to setup LED default states Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy Lukasz Majewski
2019-03-04 22:26 ` Joe Hershberger
2019-03-04 22:35 ` Lukasz Majewski
2019-02-08 17:42 [U-Boot] [PATCH v1 00/26] colibri imx6 fixes, device tree enablement and driver model conversion Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 01/26] colibri_imx6: get rid of obsolete nospl configurations Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 02/26] colibri_imx6: use distro defaults Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 03/26] colibri_imx6: move console in env from header file to defconfig Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 06/26] colibri_imx6: migrate to using device tree Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 07/26] colibri_imx6: clean-up and migrate gpios to using driver model Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 08/26] colibri_imx6: enable pin control driver Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 09/26] colibri_imx6: migrate i2c to using driver model Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 10/26] colibri_imx6: migrate pmic and regulator " Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 11/26] colibri_imx6: migrate mmc " Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 12/26] colibri_imx6: migrate usb " Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 14/26] colibri_imx6: print also 64-bit IT Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 15/26] colibri_imx6: add distroboot support Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 17/26] colibri imx6: pf0100: reorder and cleanup message printing Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 18/26] colibri imx6: disable ri and dcd irq in uarts Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 20/26] colibri_imx6: revert fuse value set in mfgr_fuse Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 22/26] configs: colibri_imx6: Use ext4 file system by default Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 23/26] colibri_imx6: use SDP if USB serial downloader has been used Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 24/26] colibri_imx6: switch to zimage Marcel Ziswiler
2019-02-08 21:42 ` Lukasz Majewski
2019-02-08 21:48 ` Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 25/26] colibri_imx6: added nreset gpio on reboot Marcel Ziswiler
[not found] ` <gerard.salvatella@toradex.com>
[not found] ` <igor.opaniuk@toradex.com>
[not found] ` <support.arm@toradex.com>
2019-04-26 9:37 ` [U-Boot] [U-Boot, v3, 14/14] ARM: dts: colibri-imx6ull: update device tree sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v3, 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl sbabic at denx.de
[not found] ` <antti.maentausta@ge.com>
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 13/14] Convert CONFIG_USB_EHCI_MX5 to Kconfig sbabic at denx.de
2019-02-08 17:42 ` [U-Boot] [PATCH v1 26/26] board: colibri_imx6: check for and report ecc errors in fuses Marcel Ziswiler
2019-02-08 17:12 [U-Boot] [PATCH v2 00/23] apalis imx6 fixes, device tree enablement and driver model conversion Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 01/23] apalis_imx6: get rid of obsolete nospl configurations Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 02/23] apalis_imx6: use distro defaults Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 03/23] apalis_imx6: move console in env from header file to defconfig Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support Marcel Ziswiler
2019-03-12 10:45 ` Igor Opaniuk
2019-02-08 17:12 ` [U-Boot] [PATCH v2 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration Marcel Ziswiler
2019-03-12 10:46 ` Igor Opaniuk
2019-02-08 17:12 ` [U-Boot] [PATCH v2 06/23] apalis_imx6: migrate to using device tree Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 07/23] apalis_imx6: clean-up and migrate gpios to using driver model Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 08/23] apalis_imx6: enable pin control driver Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 09/23] apalis_imx6: migrate i2c to using driver model Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 10/23] apalis_imx6: migrate pmic and regulator " Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata " Marcel Ziswiler
2019-02-25 10:39 ` Soeren Moch
2019-03-01 12:20 ` Soeren Moch
2019-03-01 12:29 ` Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 12/23] apalis_imx6: migrate usb " Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 14/23] apalis_imx6: add distroboot support Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 17/23] apalis_imx6: pf0100: reorder and cleanup message printing Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 18/23] apalis_imx6: disable ri and dcd irq in uarts Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 19/23] apalis_imx6: revert fuse value set in mfgr_fuse Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 20/23] configs: apalis_imx6: Use ext4 file system by default Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 21/23] apalis_imx6: use SDP if USB serial downloader has been used Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 22/23] apalis_imx6: switch to zimage Marcel Ziswiler
[not found] ` <bhuvanchandra.dv@toradex.com>
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 15/22] colibri_vf: sync the board info message sbabic at denx.de
2019-02-08 17:12 ` [U-Boot] [PATCH v2 23/23] board: apalis_imx6: check for and report ecc errors in fuses Marcel Ziswiler
2019-02-01 16:40 [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support Abel Vesa
2019-02-01 16:40 ` [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY Abel Vesa
2019-02-01 19:01 ` Tom Rini
2019-02-01 21:08 ` Lukasz Majewski
2019-02-02 9:40 ` Fabio Estevam
2019-02-16 9:23 ` Stefano Babic
2019-02-18 8:27 ` Abel Vesa
2019-02-01 16:40 ` [U-Boot] [PATCH v4 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE Abel Vesa
2019-02-02 9:40 ` Fabio Estevam
2019-02-02 21:46 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent Abel Vesa
2019-02-02 9:41 ` Fabio Estevam
2019-02-02 21:47 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 04/20] configs: imx6sabreauto: Add DM_MMC support Abel Vesa
2019-02-02 9:41 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 05/20] configs: imx6sabreauto: Add DM_USB support Abel Vesa
2019-02-02 9:42 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds Abel Vesa
2019-02-02 9:42 ` Fabio Estevam
2019-02-02 21:48 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL Abel Vesa
2019-02-02 9:43 ` Fabio Estevam
2019-02-02 21:48 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 08/20] board: mx6sabreauto: " Abel Vesa
2019-02-02 9:43 ` Fabio Estevam
2019-02-02 21:49 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files Abel Vesa
2019-02-02 9:44 ` Fabio Estevam
2019-02-02 21:50 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] Abel Vesa
2019-02-02 9:45 ` Fabio Estevam
2019-02-02 21:50 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 11/20] configs: mx6sabreauto: Add SPL FIT and DM support Abel Vesa
2019-02-02 9:45 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 12/20] configs: mx6sabresd: " Abel Vesa
2019-02-02 9:45 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 14/20] mx6sabresd: Add DM_GPIO support Abel Vesa
2019-02-02 9:46 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 13/20] mx6sabreauto: " Abel Vesa
2019-02-02 9:46 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs Abel Vesa
2019-02-02 9:46 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 16/20] configs: mx6sabresd: " Abel Vesa
2019-02-02 9:47 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 17/20] board: mx6sabreauto: Remove the non-DM code Abel Vesa
2019-02-02 9:47 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 18/20] board: mx6sabresd: Remove " Abel Vesa
2019-02-02 9:47 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling Abel Vesa
2019-02-02 9:48 ` Fabio Estevam
2019-02-28 19:01 ` Soeren Moch
2019-02-28 19:24 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support Abel Vesa
2019-02-02 9:49 ` Fabio Estevam
2019-02-01 17:13 ` [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support Fabio Estevam
2019-02-01 17:59 ` Abel Vesa
2019-02-01 18:18 ` Fabio Estevam
2019-02-01 19:01 ` Tom Rini
2019-02-02 9:50 ` Fabio Estevam
2019-02-04 9:55 ` Abel Vesa
2019-02-04 11:03 ` Fabio Estevam
2019-02-04 13:19 ` Tom Rini
2019-02-04 15:15 ` Abel Vesa
2019-02-04 15:21 ` Simon Goldschmidt
2019-02-04 15:30 ` Tom Rini
2019-02-09 22:48 ` Abel Vesa
2019-02-09 22:55 ` Fabio Estevam
2019-02-01 15:04 [U-Boot] [PATCH v1 0/3] imx: cpu.c, serial_mxc, dts fixes/improvements Marcel Ziswiler
2019-02-01 15:04 ` [U-Boot] [PATCH v1 1/3] ARM: dts: i.MX6Q, i.MX6QDL: fix address/size-cells warnings Marcel Ziswiler
[not found] ` <trini@konsulko.com>
2019-02-16 10:26 ` [U-Boot] [U-Boot, v1, " sbabic at denx.de
2019-02-01 15:04 ` [U-Boot] [PATCH v1 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode Marcel Ziswiler
2019-02-15 12:26 ` Stefano Babic
2019-02-01 15:04 ` [U-Boot] [PATCH v1 3/3] imx: cpu.c: give access to reset cause in spl Marcel Ziswiler
2019-01-08 11:42 [U-Boot] [PATCH v2 00/11] arm: Colibri iMX7 fixes and DM_MMC conversion Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 01/11] colibri_imx7: fix boot commands Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 02/11] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 03/11] configs: colibri_imx7: enable DM for raw NAND devices Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 04/11] configs: colibri_imx7: use separate device tree Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 05/11] arm: dts: imx7: colibri: add usdhci peripherals to " Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 06/11] configs: colibri_imx7: use DM_MMC Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 07/11] colibri_imx7: drop legacy usdhc support Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 08/11] configs: colibri_imx7: enable CAAM driver Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 09/11] configs: colibri_imx7: use DFU for NAND instead of MMC Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 10/11] configs: colibri_imx7: use distro defaults Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 11/11] configs: add default configuraiton for Colibri iMX7 with eMMC Stefan Agner
[not found] ` <stefan.agner@toradex.com>
[not found] ` <martyn.welch@collabora.com>
[not found] ` <ian.ray@ge.com>
[not found] ` <marcel.ziswiler@toradex.com>
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 17/22] config: bk4: Update u-boot script to support recovery via SD card sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 05/22] pcm052: board: Do not enable I2C2 code in the board file sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux" sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 15/22] config: bk4: Update include/configs/bk4r1.h file sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup sbabic at denx.de
[not found] ` <max.krummenacher@toradex.com>
[not found] ` <Ken.Lin@advantech.com.tw>
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 11/11] configs: add default configuraiton for Colibri iMX7 with eMMC sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 04/11] configs: colibri_imx7: use separate device tree sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 10/11] configs: colibri_imx7: use distro defaults sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 02/11] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,v2,01/11] colibri_imx7: fix boot commands sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 07/11] colibri_imx7: drop legacy usdhc support sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 03/11] configs: colibri_imx7: enable DM for raw NAND devices sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot,v2,06/11] configs: colibri_imx7: use DM_MMC sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 08/11] configs: colibri_imx7: enable CAAM driver sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 05/11] arm: dts: imx7: colibri: add usdhci peripherals to device tree sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 09/11] configs: colibri_imx7: use DFU for NAND instead of MMC sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v1, 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 25/26] colibri_imx6: added nreset gpio on reboot sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 11/26] colibri_imx6: migrate mmc to using driver model sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v2, 10/23] apalis_imx6: migrate pmic and regulator " sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 17/26] colibri imx6: pf0100: reorder and cleanup message printing sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 22/26] configs: colibri_imx6: Use ext4 file system by default sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot,v1,14/26] colibri_imx6: print also 64-bit IT sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v2,02/23] apalis_imx6: use distro defaults sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 07/23] apalis_imx6: clean-up and migrate gpios to using driver model sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 12/26] colibri_imx6: migrate usb " sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 12/23] apalis_imx6: " sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 08/26] colibri_imx6: enable pin control driver sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 19/23] apalis_imx6: revert fuse value set in mfgr_fuse sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v2,22/23] apalis_imx6: switch to zimage sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 03/23] apalis_imx6: move console in env from header file to defconfig sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v1,02/26] colibri_imx6: use distro defaults sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v1,24/26] colibri_imx6: switch to zimage sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 06/23] apalis_imx6: migrate to using device tree sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 20/23] configs: apalis_imx6: Use ext4 file system by default sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v1, 10/26] colibri_imx6: migrate pmic and regulator to using driver model sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v2, 18/23] apalis_imx6: disable ri and dcd irq in uarts sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v2, 09/23] apalis_imx6: migrate i2c to using driver model sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v2, 01/23] apalis_imx6: get rid of obsolete nospl configurations sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 18/26] colibri imx6: disable ri and dcd irq in uarts sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 06/26] colibri_imx6: migrate to using device tree sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 03/26] colibri_imx6: move console in env from header file to defconfig sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 11/23] apalis_imx6: migrate mmc and sata to using driver model sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 26/26] board: colibri_imx6: check for and report ecc errors in fuses sbabic at denx.de
2019-03-24 21:42 ` Marcel Ziswiler
2019-03-25 12:14 ` Stefano Babic
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 20/26] colibri_imx6: revert fuse value set in mfgr_fuse sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 01/26] colibri_imx6: get rid of obsolete nospl configurations sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 07/26] colibri_imx6: clean-up and migrate gpios to using driver model sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot,v2,08/23] apalis_imx6: enable pin control driver sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 09/26] colibri_imx6: migrate i2c to using driver model sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 23/23] board: apalis_imx6: check for and report ecc errors in fuses sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 17/23] apalis_imx6: pf0100: reorder and cleanup message printing sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,13/17] imx6: wandboard: convert to DM_USB sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,11/17] imx6: wandboard: add device tree sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,17/17] imx6: wandboard: convert to DM_MMC sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,08/17] colibri_imx6: convert to DM_VIDEO sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,10/17] mx6sabreauto: " sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, 03/17] imx: move CONFIG_VIDEO_IPUV3 to defconfigs sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, 12/17] imx6: wandboard: convert to DM_GPIO and enable pinctrl driver sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,16/17] imx6: wandboard: convert to DM_I2C sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,14/17] imx6: wandboard: convert to DM_VIDEO sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,05/17] apalis_imx6: " sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,09/17] mx6sabresd: " sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,06/17] imx6: icore: " sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,01/17] video: ipuv3: add DM_VIDEO support sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,02/17] video: move ipuv3 files to subdirectory sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, 04/17] imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,07/17] imx6: ge_bx50v3: convert to DM_VIDEO sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,15/17] imx6: wandboard: convert to DM_PMIC sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 05/14] colibri-imx6ull: fix ethernet phy power on sbabic at denx.de
[not found] ` <dominik.sliwa@toradex.com>
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 4/5] board: toradex: tdx-cfg-block: add new skus sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 3/5] board: toradex: tdx-cfg-block: clean-up sku handling sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v4, 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup) sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v4, 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 02/22] net: Kconfig: FEC: Add dependency on VF610 sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 20/22] pcm052: board: Add code to setup LED default states sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 08/22] pcm052: board: vybrid: Update the board name for BK4 device sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 08/22] ARM: dts: colibri_vf: update device trees sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot,v1,15/26] colibri_imx6: add distroboot support sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v2,14/23] apalis_imx6: " sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v1, 23/26] colibri_imx6: use SDP if USB serial downloader has been used sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 21/23] apalis_imx6: " sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 22/22] colibri_vf: fix sdboot for vybrid modules sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,v2,13/22] colibri_vf: add distroboot support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 20/22] colibri_vf: adjust timing according to data sheet sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 12/22] config: colibri_vf: use macros from linux/sizes.h sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 21/22] colibri_vf: use leveling evaluated by DDR validation tools sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,v2,14/22] colibri_vf: set fdtfile for distroboot sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 06/22] configs: colibri_vf: limit size of malloc() pool before relocation sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 17/22] colibri_vf: disable undefined instruction events in user debug sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 18/22] config: colibri_vf: enable mtd partitions via dt sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 09/22] configs: colibri_vf: disable obscure options sbabic at denx.de
2019-04-01 9:09 ` [U-Boot] [U-Boot, v2, 16/22] colibri_vf: enable user debug by default sbabic at denx.de
2019-04-26 9:36 ` [U-Boot] [U-Boot, imx-next, v1, 01/14] ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTS sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 08/14] DTS: Enable USB host support (including regulators) on HSC|DDC boards sbabic at denx.de
[not found] ` <alison.wang@nxp.com>
[not found] ` <akshaybhat@timesys.com>
[not found] ` <lzenz@dh-electronics.de>
[not found] ` <eran.m@variscite.com>
2019-04-01 9:09 ` [U-Boot] [U-Boot, v2, 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 1/2] ARM: imx6: DHCOM i.MX6 PDK: use Kconfig for inclusion of DDR calibration sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 11/14] colibri-imx6ull: migrate fec to using driver model sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 09/14] colibri-imx6ull: migrate mmc " sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 12/14] ARM: config: Remove not needed CONFIG_MXC_USB_PORT define sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 10/14] USB: DM: Convert i.MX5 ehci code to driver model sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,v1] colibri_vf: fix tab vs. spaces sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 02/14] tdx-cfg-block: simplify i.MX 6 module detection sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 14/14] boot.src: Provide dsa_core.blacklist bootarg when booting via NFS sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 07/14] DTS: Provide USB host DTS description for i.MX53 devices sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 09/14] ARM: Remove EHCI specific code from HSC|DDC board file sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 05/14] ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 04/14] ARM: defconfig: Move CONFIG_FSL_ESDHC to Kconfig sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 06/14] board: imx6ull: Add disable PMIC_STBY_REQ sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 07/14] colibri-imx6ull: configuration clean-up sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v1] colibri_vf: fix ethernet by adding explicit phy node sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v2, 03/14] colibri-imx6ull: set module variant depending on config block sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, imx-next, v1, 02/14] DTS: Add esdhc3 device tree description tuning for HSC|DDC boards sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v2, 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm sbabic at denx.de
2019-04-26 9:55 ` [U-Boot] [U-Boot, imx-next, v1, 06/14] ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic file sbabic at denx.de
2019-04-26 9:55 ` [U-Boot] [U-Boot, v2, 10/14] colibri-imx6ull: migrate usb to using driver model sbabic at denx.de
2019-01-03 22:50 [U-Boot] [PATCH] ARM: imx: fix: Provide correct enum values for ONENAND/NOR boot recognition Lukasz Majewski
2019-01-03 6:54 [U-Boot] [PATCH 0/3] Migrate i.MX53 based cx9020 to CONFIG_DM_MMC=y linux-kernel-dev at beckhoff.com
2019-01-03 6:54 ` [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: add compatible for fsl, imx53-esdhc linux-kernel-dev at beckhoff.com
2019-01-30 8:57 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-01-03 6:54 ` [U-Boot] [PATCH 2/3] arm: imx: Add esdhc1/2 nodes to imx53.dtsi linux-kernel-dev at beckhoff.com
2019-01-30 9:15 ` [U-Boot] [U-Boot,2/3] " sbabic at denx.de
2019-01-03 6:54 ` [U-Boot] [PATCH 3/3] dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC linux-kernel-dev at beckhoff.com
2019-01-02 6:58 [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism Baruch Siach
2019-01-02 6:58 ` [U-Boot] [PATCH 2/2] imx8mq_evk/README: remove ARCH environment variable Baruch Siach
2019-01-03 13:41 ` [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism Christopher Spencer
2019-02-28 1:43 ` Fabio Estevam
2019-02-28 4:23 ` Baruch Siach
2019-04-01 13:20 ` Otavio Salvador
2019-04-01 13:46 ` Stefano Babic
2019-04-01 13:49 ` Fabio Estevam
2019-04-01 14:05 ` Stefano Babic
2019-04-01 14:14 ` Fabio Estevam
2019-04-01 15:51 ` Stefano Babic
2019-04-01 13:56 ` Otavio Salvador
2019-04-01 14:08 ` Tom Rini
2018-12-21 6:21 [U-Boot] [PATCH V2 00/10] i.MX8QXP: MEK: support SPL Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 01/10] imx8qxp: add SUPPORT_SPL option Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 02/10] imx8: scu: use dedicated MU for SPL Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 03/10] arm: imx: build mach-imx for i.MX8 Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 04/10] gpio: introduce CONFIG_SPL_DM_PCA953X Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 05/10] spl: imx8: add spl boot device Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 06/10] dts: imx8qxp-mek: introduce u-boot dtsi Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 07/10] imx: mkimage_fit_atf: introduce BL33_BASE_ADDR Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 08/10] imx: build flash.bin for i.MX8 Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 09/10] imx8qxp: mek: default enable SPL Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 10/10] imx8qxp: mek: update README Peng Fan
2018-12-11 18:40 [U-Boot] [PATCH 1/3] mx7: Do not call lcdif_power_down() in the SPL case Otavio Salvador
2018-12-11 18:40 ` [U-Boot] [PATCH 2/3] pico-imx7d: Add LCD support Otavio Salvador
2018-12-11 18:40 ` [U-Boot] [PATCH 3/3] logos: Add the TechNexion's logo Otavio Salvador
2019-02-18 22:53 ` Fabio Estevam
2019-03-20 17:39 ` Fabio Estevam
2018-12-12 1:47 ` [U-Boot] [PATCH 1/3] mx7: Do not call lcdif_power_down() in the SPL case Peng Fan
[not found] ` <otavio@ossystems.com.br>
[not found] ` <rui.silva@linaro.org>
[not found] ` <linux-imx@nxp.com>
[not found] ` <fabio.estevam@nxp.com>
2019-01-30 8:57 ` [U-Boot] [U-Boot, 3/3] dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC sbabic at denx.de
[not found] ` <richard.hu@technexion.com>
[not found] ` <john.weber@technexion.com>
2019-01-30 8:57 ` [U-Boot] [U-Boot, 1/3] mx7: Do not call lcdif_power_down() in the SPL case sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,2/3] pico-imx7d: Add LCD support sbabic at denx.de
[not found] ` <marek.vasut+renesas@gmail.com>
2019-01-30 9:05 ` [U-Boot] [U-Boot,v4,2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] ARM: imx: fix: Provide correct enum values for ONENAND/NOR boot recognition sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v1, 3/3] imx: cpu.c: give access to reset cause in spl sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v2, 2/3] ddr: vybrid: Provide code to perform on-boot calibration sbabic at denx.de
2019-02-16 10:45 ` [U-Boot] [U-Boot, v2, 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code sbabic at denx.de
2019-02-16 10:45 ` [U-Boot] [U-Boot, v2, 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ) sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v3] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 1/5] misc: imx8: remove duplicates from scfw api sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v2, 2/5] arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3 sbabic at denx.de
2019-06-10 9:19 ` [U-Boot] [PATCH] ARM: imx: apalis_imx6: Drop ad-hoc SATA binding <mailto:u-boot-request@lists.denx.de?subject=unsubscribe> <mailto:u-boot-request@lists.denx.de?subject=subscribe> sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, 2/2] imx8mq_evk/README: remove ARCH environment variable sbabic at denx.de
[not found] ` <20190130084020.812982D807F@tinkie.tkos.co.il>
2019-01-30 9:48 ` Baruch Siach
2019-01-30 14:33 ` Stefano Babic
2019-01-30 15:13 ` Baruch Siach
2019-01-30 15:30 ` Stefano Babic
[not found] ` <michal.simek@xilinx.com>
[not found] ` <maxime.ripard@bootlin.com>
[not found] ` <jason.hui.liu@nxp.com>
[not found] ` <breno.lima@nxp.com>
2019-01-30 9:05 ` [U-Boot] imx: hab: Convert non-NULL IVT DCD pointer warning to an error sbabic at denx.de
[not found] ` <albert.aribaud@3adev.fr>
[not found] ` <sr@denx.de>
2019-04-01 8:52 ` [U-Boot] [U-Boot, 08/10] ata: dwc_ahsata: Add ahci driver model support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig sbabic at denx.de
2018-12-11 11:34 [U-Boot] [PATCH v4 1/2] Enable FEC driver to retrieve PHY address from device tree Martyn Welch
2018-12-11 11:34 ` [U-Boot] [PATCH v4 2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin Martyn Welch
2019-01-18 20:01 ` Martyn Welch
[not found] ` <joe.hershberger@ni.com>
2019-01-30 9:15 ` [U-Boot] [U-Boot, v4, 1/2] Enable FEC driver to retrieve PHY address from device tree sbabic at denx.de
2018-12-07 22:31 [U-Boot] [PATCH] imx: hab: Convert non-NULL IVT DCD pointer warning to an error Breno Matheus Lima
2019-01-16 12:00 ` Fabio Estevam
2018-12-05 16:04 [U-Boot] [PATCH v2 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration Lukasz Majewski
2018-12-05 16:04 ` [U-Boot] [PATCH v2 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ) Lukasz Majewski
2018-12-05 16:04 ` [U-Boot] [PATCH v2 2/3] ddr: vybrid: Provide code to perform on-boot calibration Lukasz Majewski
2018-12-05 16:04 ` [U-Boot] [PATCH v2 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code Lukasz Majewski
2019-01-02 11:28 ` [U-Boot] [PATCH v2 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190216102626.26E2AC21ECC@lists.denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox