From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Tue, 19 Feb 2019 10:37:29 +0100 Subject: [U-Boot] Kernel hang when replace older uboot with uboot master V2 In-Reply-To: <2019021917305692094016@rosinson.com> References: <2019021917305692094016@rosinson.com> Message-ID: <20190219103729.2cba8561@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: u-boot@lists.denx.de On Tue, 19 Feb 2019 17:30:57 +0800 "rosysong at rosinson.com" wrote: > Hi all,  >     And When I turn off the log, its bootlog like this: > > U-Boot 2019.01-00079-g3420a6fc6e-dirty (Feb 19 2019 - 17:19:16 +0800) > > Qualcomm Atheros QCA9561 ver 1 rev 0 > Model: AP152 Reference Board > DRAM:  128 MiB > Loading Environment from SPI Flash... SF: Detected w25q128bv with > page size 256 Bytes, erase size 4 KiB, total 16 MiB, mapped at > 9f000000 *** Warning - bad CRC, using default environment Here is the culprit - the on-board (tuned, setup) envs are not accessible (or read in a wrong way). Apparently the default envs doesn't have proper root=... setup. Please check the env related entries in Kconfig. Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: