[U-Boot] [PATCH v2 0/3] Add Ethernet support for Poplar board

[Shawn Guo <shawn.guo@linaro.org>]

On Mon, Feb 18, 2019 at 11:37:39AM +0800, Shawn Guo wrote:
> The series adds Ethernet support for Poplar board.  It firstly creates
> a reset driver for HiSilicon platform, then introduces higmacv300
> Ethernet driver, and finally enables Ethernet support for Poplar board.
> 
> Changes for v2:
>  - Rename driver symbol to HIGMACV300_ETH.
>  - Remove the use of temp variable 'addr' in higmac_recv().
>  - Simplify the return of function higmac_ofdata_to_platdata() and
>    higmac_probe().
>  - Combine delaration and initialization for phyintf in function
>    higmac_ofdata_to_platdata().
>  - Eliminate the MDIO read/write macros.
>  - Use wait_for_bit_le32() for MDIO command completion polling.
>  - Set up RX packet buffers in RX_FQ descriptor at initialization time,
>    so that we do not need to allocate/free packet buffers repeatedly.
>  - Inform GMAC that the RX descriptor is no longer in use in function
>    higmac_free_pkt().
>  - Define BITS_DESC_ENA instead of using magic number 0xf.

Hi Joe,

Does this version look good to you?

Shawn