* [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree
@ 2019-03-13 18:02 Fabio Estevam
2019-03-13 18:02 ` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path Fabio Estevam
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Fabio Estevam @ 2019-03-13 18:02 UTC (permalink / raw)
To: u-boot
After building ATF it is needed to copy the generated bl31.bin file to
the U-Boot source tree.
Make this step explicit in the instructions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
board/freescale/imx8mq_evk/README | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README
index 2529f7da3d..bd5ee12722 100644
--- a/board/freescale/imx8mq_evk/README
+++ b/board/freescale/imx8mq_evk/README
@@ -9,13 +9,14 @@ Quick Start
Get and Build the ARM Trusted firmware
====================
+Note: srctree is U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
branch: imx_4.14.62_1.0.0_beta
$ make PLAT=imx8mq bl31
+$ cp build/imx8mq/release/bl31.bin $(srctree)
Get the ddr and hdmi firmware
====================
-Note: srctree is U-Boot source directory
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
$ chmod +x firmware-imx-7.9.bin
$ ./firmware-imx-7.9.bin
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path
2019-03-13 18:02 [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree Fabio Estevam
@ 2019-03-13 18:02 ` Fabio Estevam
2019-04-02 8:38 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-13 18:02 ` [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence Fabio Estevam
2019-04-02 8:38 ` [U-Boot] [U-Boot, 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree sbabic at denx.de
2 siblings, 1 reply; 6+ messages in thread
From: Fabio Estevam @ 2019-03-13 18:02 UTC (permalink / raw)
To: u-boot
The DDR firmware binaries should be copied to '$(srctree)', so fix
a typo.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
board/freescale/imx8mq_evk/README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README
index bd5ee12722..aa9fbd8eaf 100644
--- a/board/freescale/imx8mq_evk/README
+++ b/board/freescale/imx8mq_evk/README
@@ -21,7 +21,7 @@ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
$ chmod +x firmware-imx-7.9.bin
$ ./firmware-imx-7.9.bin
$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(srctree)
-$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctee)
+$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
Build U-Boot
====================
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [U-Boot, 2/3] imx8mq_evk: README: Fix a typo in the destination path
2019-03-13 18:02 ` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path Fabio Estevam
@ 2019-04-02 8:38 ` sbabic at denx.de
0 siblings, 0 replies; 6+ messages in thread
From: sbabic at denx.de @ 2019-04-02 8:38 UTC (permalink / raw)
To: u-boot
> The DDR firmware binaries should be copied to '$(srctree)', so fix
> a typo.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence
2019-03-13 18:02 [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree Fabio Estevam
2019-03-13 18:02 ` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path Fabio Estevam
@ 2019-03-13 18:02 ` Fabio Estevam
2019-04-02 8:38 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-04-02 8:38 ` [U-Boot] [U-Boot, 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree sbabic at denx.de
2 siblings, 1 reply; 6+ messages in thread
From: Fabio Estevam @ 2019-03-13 18:02 UTC (permalink / raw)
To: u-boot
Let the underline marker "=" fill the whole sentence for better
readability.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
board/freescale/imx8mq_evk/README | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README
index aa9fbd8eaf..c1d400bcf9 100644
--- a/board/freescale/imx8mq_evk/README
+++ b/board/freescale/imx8mq_evk/README
@@ -1,14 +1,14 @@
U-Boot for the NXP i.MX8MQ EVK board
Quick Start
-====================
+===========
- Build the ARM Trusted firmware binary
- Get ddr and hdmi fimware
- Build U-Boot
- Boot
Get and Build the ARM Trusted firmware
-====================
+======================================
Note: srctree is U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
branch: imx_4.14.62_1.0.0_beta
@@ -16,7 +16,7 @@ $ make PLAT=imx8mq bl31
$ cp build/imx8mq/release/bl31.bin $(srctree)
Get the ddr and hdmi firmware
-====================
+=============================
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
$ chmod +x firmware-imx-7.9.bin
$ ./firmware-imx-7.9.bin
@@ -24,7 +24,7 @@ $ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(srctree)
$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
Build U-Boot
-====================
+============
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx8mq_evk_defconfig
$ make flash.bin
@@ -33,5 +33,5 @@ Burn the flash.bin to MicroSD card offset 33KB
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
Boot
-====================
+====
Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [U-Boot, 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence
2019-03-13 18:02 ` [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence Fabio Estevam
@ 2019-04-02 8:38 ` sbabic at denx.de
0 siblings, 0 replies; 6+ messages in thread
From: sbabic at denx.de @ 2019-04-02 8:38 UTC (permalink / raw)
To: u-boot
> Let the underline marker "=" fill the whole sentence for better
> readability.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [U-Boot, 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree
2019-03-13 18:02 [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree Fabio Estevam
2019-03-13 18:02 ` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path Fabio Estevam
2019-03-13 18:02 ` [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence Fabio Estevam
@ 2019-04-02 8:38 ` sbabic at denx.de
2 siblings, 0 replies; 6+ messages in thread
From: sbabic at denx.de @ 2019-04-02 8:38 UTC (permalink / raw)
To: u-boot
> After building ATF it is needed to copy the generated bl31.bin file to
> the U-Boot source tree.
> Make this step explicit in the instructions.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-04-02 8:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-03-13 18:02 [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree Fabio Estevam
2019-03-13 18:02 ` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path Fabio Estevam
2019-04-02 8:38 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-13 18:02 ` [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence Fabio Estevam
2019-04-02 8:38 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-04-02 8:38 ` [U-Boot] [U-Boot, 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree sbabic at denx.de
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox