From: Mohammad Rasim <mohammad.rasim96@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 1/5] ARM: board: meson: rename odroid-c2 to p200
Date: Fri, 15 Mar 2019 18:11:06 +0300 [thread overview]
Message-ID: <20190315151109.17317-2-mohammad.rasim96@gmail.com> (raw)
In-Reply-To: <20190315151109.17317-1-mohammad.rasim96@gmail.com>
This renames the odroid-c2 to p200 and set it as the default GXBB board
Other boards (odroid-c2 and nanopi-k2) will inherit from p200
Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
---
arch/arm/mach-meson/Kconfig | 2 +-
board/amlogic/{odroid-c2 => p200}/MAINTAINERS | 6 +-
board/amlogic/{odroid-c2 => p200}/Makefile | 2 +-
.../{odroid-c2 => p200}/README.nanopi-k2 | 0
.../{odroid-c2 => p200}/README.odroid-c2 | 0
board/amlogic/p200/README.p200 | 103 ++++++++++++++++++
.../{odroid-c2/odroid-c2.c => p200/p200.c} | 0
configs/nanopi-k2_defconfig | 1 +
configs/odroid-c2_defconfig | 1 +
9 files changed, 110 insertions(+), 5 deletions(-)
rename board/amlogic/{odroid-c2 => p200}/MAINTAINERS (70%)
rename board/amlogic/{odroid-c2 => p200}/Makefile (82%)
rename board/amlogic/{odroid-c2 => p200}/README.nanopi-k2 (100%)
rename board/amlogic/{odroid-c2 => p200}/README.odroid-c2 (100%)
create mode 100644 board/amlogic/p200/README.p200
rename board/amlogic/{odroid-c2/odroid-c2.c => p200/p200.c} (100%)
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 11077bc6cc24..1b1d0aef0d22 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -61,7 +61,7 @@ config SYS_VENDOR
config SYS_BOARD
string "Board name"
- default "odroid-c2" if MESON_GXBB
+ default "p200" if MESON_GXBB
default "p212" if MESON_GXL
default "q200" if MESON_GXM
default "s400" if MESON_AXG
diff --git a/board/amlogic/odroid-c2/MAINTAINERS b/board/amlogic/p200/MAINTAINERS
similarity index 70%
rename from board/amlogic/odroid-c2/MAINTAINERS
rename to board/amlogic/p200/MAINTAINERS
index 6a853066d781..96fe92dd0874 100644
--- a/board/amlogic/odroid-c2/MAINTAINERS
+++ b/board/amlogic/p200/MAINTAINERS
@@ -1,8 +1,8 @@
-ODROID-C2
+P200
M: Beniamino Galvani <b.galvani@gmail.com>
M: Neil Armstrong <narmstrong@baylibre.com>
S: Maintained
-F: board/amlogic/odroid-c2/
-F: include/configs/odroid-c2.h
+F: board/amlogic/p200/
F: configs/nanopi-k2_defconfig
F: configs/odroid-c2_defconfig
+F: configs/p200_defconfig
diff --git a/board/amlogic/odroid-c2/Makefile b/board/amlogic/p200/Makefile
similarity index 82%
rename from board/amlogic/odroid-c2/Makefile
rename to board/amlogic/p200/Makefile
index a6a3db755f21..f82a7ea9ca6b 100644
--- a/board/amlogic/odroid-c2/Makefile
+++ b/board/amlogic/p200/Makefile
@@ -2,4 +2,4 @@
#
# (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
-obj-y := odroid-c2.o
+obj-y := p200.o
diff --git a/board/amlogic/odroid-c2/README.nanopi-k2 b/board/amlogic/p200/README.nanopi-k2
similarity index 100%
rename from board/amlogic/odroid-c2/README.nanopi-k2
rename to board/amlogic/p200/README.nanopi-k2
diff --git a/board/amlogic/odroid-c2/README.odroid-c2 b/board/amlogic/p200/README.odroid-c2
similarity index 100%
rename from board/amlogic/odroid-c2/README.odroid-c2
rename to board/amlogic/p200/README.odroid-c2
diff --git a/board/amlogic/p200/README.p200 b/board/amlogic/p200/README.p200
new file mode 100644
index 000000000000..01d82d1e79e3
--- /dev/null
+++ b/board/amlogic/p200/README.p200
@@ -0,0 +1,103 @@
+U-Boot for Amlogic P200
+=======================
+
+P200 is a reference board manufactured by Amlogic with the following
+specifications:
+
+ - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz
+ - ARM Mali 450 GPU
+ - 2GB DDR3 SDRAM
+ - Gigabit Ethernet
+ - HDMI 2.0 4K/60Hz display
+ - 2 x USB 2.0 Host
+ - eMMC, microSD
+ - Infrared receiver
+ - SDIO WiFi Module
+ - CVBS+Stereo Audio Jack
+
+Schematics are available from Amlogic on demand.
+
+Currently the u-boot port supports the following devices:
+ - serial
+ - eMMC, microSD
+ - Ethernet
+ - I2C
+ - Regulators
+ - Reset controller
+ - Clock controller
+ - USB Host
+ - ADC
+
+u-boot compilation
+==================
+
+ > export ARCH=arm
+ > export CROSS_COMPILE=aarch64-none-elf-
+ > make p200_defconfig
+ > make
+
+Image creation
+==============
+
+Amlogic doesn't provide sources for the firmware and for tools needed
+to create the bootloader image, so it is necessary to obtain them from
+the git tree published by the board vendor:
+
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+ > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot
+ > cd amlogic-u-boot
+ > make gxb_p200_v1_defconfig
+ > make
+ > export FIPDIR=$PWD/fip
+
+Go back to mainline U-boot source tree then :
+ > mkdir fip
+
+ > cp $FIPDIR/gxl/bl2.bin fip/
+ > cp $FIPDIR/gxl/acs.bin fip/
+ > cp $FIPDIR/gxl/bl21.bin fip/
+ > cp $FIPDIR/gxl/bl30.bin fip/
+ > cp $FIPDIR/gxl/bl301.bin fip/
+ > cp $FIPDIR/gxl/bl31.img fip/
+ > cp u-boot.bin fip/bl33.bin
+
+ > $FIPDIR/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ > $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
+
+ > $FIPDIR/blx_fix.sh \
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
+ > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
+ > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
+ > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
+ > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc
+
+and then write the image to SD with:
+
+ > DEV=/dev/your_sd_device
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/p200/p200.c
similarity index 100%
rename from board/amlogic/odroid-c2/odroid-c2.c
rename to board/amlogic/p200/p200.c
diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig
index 8bbf48f41f7d..a513bc7cf8ce 100644
--- a/configs/nanopi-k2_defconfig
+++ b/configs/nanopi-k2_defconfig
@@ -38,3 +38,4 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_BOARD="p200"
diff --git a/configs/odroid-c2_defconfig b/configs/odroid-c2_defconfig
index 747da184b3ad..f19b291164b7 100644
--- a/configs/odroid-c2_defconfig
+++ b/configs/odroid-c2_defconfig
@@ -39,3 +39,4 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_BOARD="p200"
--
2.21.0
next prev parent reply other threads:[~2019-03-15 15:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-15 15:11 [U-Boot] [PATCH v4 0/5] Arm: meson: add support for p200 and p201 boards Mohammad Rasim
2019-03-15 15:11 ` Mohammad Rasim [this message]
2019-03-23 10:10 ` [U-Boot] [PATCH v4 1/5] ARM: board: meson: rename odroid-c2 to p200 Neil Armstrong
2019-03-23 10:11 ` [U-Boot] [PATCH v4 0/5] Arm: meson: add support for p200 and p201 boards Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190315151109.17317-2-mohammad.rasim96@gmail.com \
--to=mohammad.rasim96@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox