From: Faiz Abbas <faiz_abbas@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 08/11] configs: am335x_evm: Reduce size of SPL
Date: Mon, 18 Mar 2019 13:54:38 +0530 [thread overview]
Message-ID: <20190318082441.16635-9-faiz_abbas@ti.com> (raw)
In-Reply-To: <20190318082441.16635-1-faiz_abbas@ti.com>
Make some room in SPL by getting rid of unnecessary configs.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
configs/am335x_evm_defconfig | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index 6c791be374..16b78f9d7e 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -7,6 +7,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
+CONFIG_LOGLEVEL=3
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
@@ -31,6 +32,7 @@ CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
CONFIG_OF_LIST="am335x-evm am335x-bone am335x-boneblack am335x-evmsk am335x-bonegreen am335x-icev2"
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_ENV_IS_NOWHERE=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DFU_MMC=y
CONFIG_DFU_NAND=y
@@ -39,13 +41,13 @@ CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_DM_I2C=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
+# CONFIG_MMC_HW_PARTITIONING is not set
CONFIG_MMC_OMAP_HS=y
CONFIG_NAND=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
-CONFIG_PHY_GIGE=y
CONFIG_MII=y
CONFIG_DRIVER_TI_CPSW=y
CONFIG_SPI=y
@@ -69,3 +71,4 @@ CONFIG_USB_ETHER=y
CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_RSA=y
CONFIG_LZO=y
+# CONFIG_OF_LIBFDT_OVERLAY is not set
--
2.19.2
next prev parent reply other threads:[~2019-03-18 8:24 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-18 8:24 [U-Boot] [PATCH 00/11] Fix Ethernet boot in am335x Faiz Abbas
2019-03-18 8:24 ` [U-Boot] [PATCH 01/11] net: Add priv_pdata to eth_pdata Faiz Abbas
2019-04-12 16:31 ` [U-Boot] [U-Boot,01/11] " Tom Rini
2019-03-18 8:24 ` [U-Boot] [PATCH 02/11] net: ti: cpsw: Move cpsw_phy_sel() to _probe() Faiz Abbas
2019-04-12 16:31 ` [U-Boot] [U-Boot, " Tom Rini
2019-03-18 8:24 ` [U-Boot] [PATCH 03/11] net: ti: cpsw: Convert cpsw_platform_data to a pointer in cpsw_priv Faiz Abbas
2019-04-12 16:31 ` [U-Boot] [U-Boot, " Tom Rini
2019-03-18 8:24 ` [U-Boot] [PATCH 04/11] net: ti: cpsw-common: Isolate getting syscon address from assigning macid Faiz Abbas
2019-04-12 16:31 ` [U-Boot] [U-Boot, " Tom Rini
2019-03-18 8:24 ` [U-Boot] [PATCH 05/11] net: ti: cpsw: Block off ofdata_to_platdata with OF_CONTROL Faiz Abbas
2019-04-12 16:31 ` [U-Boot] [U-Boot, " Tom Rini
2019-03-18 8:24 ` [U-Boot] [PATCH 06/11] net: ti: cpsw: Enable DM_FLAG_PRE_RELOC Faiz Abbas
2019-04-12 16:31 ` [U-Boot] [U-Boot, " Tom Rini
2019-03-18 8:24 ` [U-Boot] [PATCH 07/11] board: ti: am335x: Add platdata for cpsw in SPL Faiz Abbas
2019-03-18 14:10 ` Tom Rini
2019-03-19 8:00 ` Faiz Abbas
2019-04-12 16:31 ` [U-Boot] [U-Boot, " Tom Rini
2019-03-18 8:24 ` Faiz Abbas [this message]
2019-03-18 14:11 ` [U-Boot] [PATCH 08/11] configs: am335x_evm: Reduce size of SPL Tom Rini
2019-04-12 16:32 ` [U-Boot] [U-Boot, " Tom Rini
2019-03-18 8:24 ` [U-Boot] [PATCH 09/11] configs: am335x_evm: Add Support for SPL_ETH Faiz Abbas
2019-04-12 16:32 ` [U-Boot] [U-Boot, " Tom Rini
2019-03-18 8:24 ` [U-Boot] [PATCH 10/11] configs: am335x_evm: Update VCI String Faiz Abbas
2019-03-18 14:11 ` Tom Rini
2019-04-12 16:32 ` [U-Boot] [U-Boot,10/11] " Tom Rini
2019-03-18 8:24 ` [U-Boot] [PATCH 11/11] board: ti: am335x: Remove non DM_ETH code Faiz Abbas
2019-04-12 16:32 ` [U-Boot] [U-Boot, " Tom Rini
2019-03-18 14:10 ` [U-Boot] [PATCH 00/11] Fix Ethernet boot in am335x Tom Rini
2019-03-19 7:58 ` Faiz Abbas
2019-03-21 15:22 ` Andrew F. Davis
2019-03-21 15:26 ` Andrew F. Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190318082441.16635-9-faiz_abbas@ti.com \
--to=faiz_abbas@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox