From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 10/11] arm: at91: siemens: Add support to generate combined SPL+U-Boot image
Date: Tue, 19 Mar 2019 16:56:31 +0100 [thread overview]
Message-ID: <20190319155632.5680-10-sr@denx.de> (raw)
In-Reply-To: <20190319155632.5680-1-sr@denx.de>
This patch adds the necessary defines to the Siemens AT91SAM based
boards (smartweb, corvus and taurus) to generate the combined binary
image with SPL and main U-Boot image combined (u-boot-with-spl.bin).
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
---
include/configs/corvus.h | 3 +++
include/configs/smartweb.h | 4 ++++
include/configs/taurus.h | 3 +++
3 files changed, 10 insertions(+)
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index 5dd5c28e08..749a67d4b0 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -139,4 +139,7 @@
#define CONFIG_SYS_MCKR 0x1301
#define CONFIG_SYS_MCKR_CSS 0x1302
+#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
+
#endif
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index 28af575bf2..f95b29480d 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -221,4 +221,8 @@
#define CONFIG_SYS_ICACHE_OFF
#define CONFIG_SYS_DCACHE_OFF
#endif
+
+#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
+
#endif /* __CONFIG_H */
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index f283ab7fca..8e56e62282 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -177,4 +177,7 @@
#define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR)
#define CONFIG_SYS_AT91_PLLB 0x10193F05
+#define CONFIG_SPL_PAD_TO CONFIG_SYS_NAND_U_BOOT_OFFS
+#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
+
#endif
--
2.21.0
next prev parent reply other threads:[~2019-03-19 15:56 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-19 15:56 [U-Boot] [PATCH 01/11] arm: at91: Makefile: Compile lowlevel_init only when really necessary Stefan Roese
2019-03-19 15:56 ` [U-Boot] [PATCH 02/11] arm: at91: spl_at91.c: Call spl_early_init() if OF_CONTROL is enabled Stefan Roese
2019-03-19 15:56 ` [U-Boot] [PATCH 03/11] serial: atmel_usart: Use fixed clock value in SPL version Stefan Roese
2019-03-20 7:25 ` Eugen.Hristev at microchip.com
2019-03-20 7:30 ` Stefan Roese
2019-03-25 14:27 ` Eugen.Hristev at microchip.com
2019-03-25 14:57 ` Stefan Roese
2019-03-19 15:56 ` [U-Boot] [PATCH 04/11] watchdog: Handle SPL build with watchdog disabled Stefan Roese
2019-03-20 7:30 ` Eugen.Hristev at microchip.com
2019-03-20 7:33 ` Stefan Roese
2019-03-20 7:41 ` Eugen.Hristev at microchip.com
2019-03-20 7:48 ` Stefan Roese
2019-03-20 8:06 ` Eugen.Hristev at microchip.com
2019-03-20 8:10 ` Stefan Roese
2019-03-19 15:56 ` [U-Boot] [PATCH 05/11] watchdog: at91sam9_wdt: Fix WDT setup in at91_wdt_start() Stefan Roese
2019-03-19 15:56 ` [U-Boot] [PATCH 06/11] arm: at91: Enable watchdog support Stefan Roese
2019-03-21 10:23 ` Eugen.Hristev at microchip.com
2019-03-21 12:00 ` Stefan Roese
2019-03-21 12:07 ` Eugen.Hristev at microchip.com
2019-03-19 15:56 ` [U-Boot] [PATCH 07/11] arm: at91: arm926ejs/u-boot-spl.lds: Add _image_binary_end to SPL lds Stefan Roese
2019-03-19 15:56 ` [U-Boot] [PATCH 08/11] Makefile.spl: Move generate AT91SAM NAND image boot.bin to spl directory Stefan Roese
2019-03-25 14:22 ` Eugen.Hristev at microchip.com
2019-03-25 14:24 ` Stefan Roese
2019-03-26 7:06 ` Heiko Schocher
2019-03-19 15:56 ` [U-Boot] [PATCH 09/11] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary Stefan Roese
2019-03-19 15:56 ` Stefan Roese [this message]
2019-03-19 15:56 ` [U-Boot] [PATCH 11/11] arm: at91: Add gardena-gateway-at91sam support Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190319155632.5680-10-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox