[U-Boot] [PATCH] configs: ti: Move FIT image load address to avoid overwrite

[Andrew F. Davis <afd@ti.com>]

The FIT image is loaded to 0x8700_0000 followed by extracting from that
several large images also into the 0x8x00_0000 range. Large images
can end up overwriting the FIT image as it is being extracted from.
Move the FIT load address clear out to 0x9000_0000, this will require
a board to have at least 256MB of DRAM, if less then more careful
planning will be required for that platform.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 include/configs/ti_armv7_common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 1e2a62dd6f..828fb1b2a5 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -52,7 +52,7 @@
 
 #define DEFAULT_FIT_TI_ARGS \
 	"boot_fit=0\0" \
-	"fit_loadaddr=0x87000000\0" \
+	"fit_loadaddr=0x90000000\0" \
 	"fit_bootfile=fitImage\0" \
 	"update_to_fit=setenv loadaddr ${fit_loadaddr}; setenv bootfile ${fit_bootfile}\0" \
 	"loadfit=run args_mmc; bootm ${loadaddr}#${fdtfile};\0" \
-- 
2.21.0