From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Wed, 27 Mar 2019 14:20:23 +0100 Subject: [U-Boot] [PATCH] pico-imx6ul: Fix eMMC boot after DM_MMC conversion In-Reply-To: References: <20190321135906.13704-1-festevam@gmail.com> <20190327102302.39a0b180@jawa> Message-ID: <20190327142023.6420abfc@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, > Hi Lukasz, > > On Wed, Mar 27, 2019 at 6:23 AM Lukasz Majewski wrote: > > > This seems like a temporary solution - the u-boot proper is > > converted to use DM_MMC, but the pinmux setup code is moved to SPL > > instead. > > > > The proper solution would be to add support for pinmux in SPL and > > setup those pins there. > > Thanks for the suggestion. > > The problem is that we are too close of 2019.04 and pico-mx6ul is > currently broken. > > This is the least invasive fix we can have to avoid breakage at the > moment. I see. Let's fix the board first before release. > > Can we go with this patch for 2019.04 and then revisit the pinctrl > setting in SPL afterwards? Yes, no problem. I just wanted to show that a similar work has been done previously. > > Thanks Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: