From: Anand Moon <linux.amoon@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC 4/6] configs: exynos: Add new CONFIG_SYS_ODROID_USB config option
Date: Mon, 1 Apr 2019 11:52:30 +0000 [thread overview]
Message-ID: <20190401115232.453-5-linux.amoon@gmail.com> (raw)
In-Reply-To: <20190401115232.453-1-linux.amoon@gmail.com>
Add new CONFIG_SYS_ODROID_USB flag to avoid compliation
error on other development boards.
Fix below compilation error:
Error: You must add new CONFIG options using Kconfig
The following new ad-hoc CONFIG options were detected:
CONFIG_SYS_ODROID_USB
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
board/samsung/odroid/Kconfig | 3 +++
drivers/usb/host/ehci-exynos.c | 6 ++++++
include/configs/odroid.h | 1 +
3 files changed, 10 insertions(+)
diff --git a/board/samsung/odroid/Kconfig b/board/samsung/odroid/Kconfig
index 8b52a0d589..c5fbffabad 100644
--- a/board/samsung/odroid/Kconfig
+++ b/board/samsung/odroid/Kconfig
@@ -9,4 +9,7 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "odroid"
+config SYS_ODROID_USB
+ bool "Exynos4412 Odroid USB"
+
endif
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index e6a542e092..3f62eba486 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -31,7 +31,9 @@ struct exynos_ehci_platdata {
struct gpio_desc vbus_gpio;
};
+#ifdef CONFIG_SYS_ODROID_USB
extern int exynos_usb_init(void);
+#endif
/**
* Contains pointers to register base addresses
@@ -145,6 +147,7 @@ static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb)
static int ehci_exynos_init_after_reset(struct ehci_ctrl *ehcntl)
{
+#ifdef CONFIG_SYS_ODROID_USB
if (cpu_is_exynos4()) {
if (proid_is_exynos4412()) {
/*
@@ -153,6 +156,7 @@ static int ehci_exynos_init_after_reset(struct ehci_ctrl *ehcntl)
exynos_usb_init();
}
}
+#endif
return 0;
}
@@ -172,10 +176,12 @@ static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb)
udelay(10);
clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST));
+#ifdef CONFIG_SYS_ODROID_USB
/*
* "usb start" initialize the usb driver
*/
exynos_usb_init();
+#endif
}
static void setup_usb_phy(struct exynos_usb_phy *usb)
diff --git a/include/configs/odroid.h b/include/configs/odroid.h
index 9f2d43e3fa..d8d30c0f62 100644
--- a/include/configs/odroid.h
+++ b/include/configs/odroid.h
@@ -32,6 +32,7 @@
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+#define CONFIG_SYS_ODROID_USB
#include <linux/sizes.h>
--
2.21.0
next prev parent reply other threads:[~2019-04-01 11:52 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-01 11:52 [U-Boot] [RFC 0/6] Odroid U3 usb initialization Anand Moon
2019-04-01 11:52 ` [U-Boot] [RFC 1/6] odroid: exynos: USB initialization on the U3/X2 Anand Moon
2019-04-01 12:48 ` Krzysztof Kozlowski
2019-04-01 16:20 ` Anand Moon
2019-04-01 12:57 ` Lukasz Majewski
2019-04-01 13:22 ` Jack Mitchell
2019-04-03 19:58 ` Tobias Jakobi
2019-04-04 3:01 ` Anand Moon
2019-04-01 11:52 ` [U-Boot] [RFC 2/6] odroid: exynos: usb clean up for U3/X2 Anand Moon
2019-04-01 12:51 ` Krzysztof Kozlowski
2019-04-01 15:57 ` Anand Moon
2019-04-01 16:12 ` Krzysztof Kozlowski
2019-04-01 11:52 ` [U-Boot] [RFC 3/6] usb: exynos: add init_after_reset for usb reset Anand Moon
2019-04-01 12:55 ` Krzysztof Kozlowski
2019-04-01 16:05 ` Anand Moon
2019-04-01 16:14 ` Krzysztof Kozlowski
2019-04-01 11:52 ` Anand Moon [this message]
2019-04-01 12:57 ` [U-Boot] [RFC 4/6] configs: exynos: Add new CONFIG_SYS_ODROID_USB config option Krzysztof Kozlowski
2019-04-01 15:50 ` Anand Moon
2019-04-01 16:16 ` Krzysztof Kozlowski
2019-04-01 17:16 ` Anand Moon
2019-04-02 7:02 ` Krzysztof Kozlowski
2019-04-02 7:52 ` Anand Moon
2019-04-02 7:56 ` Krzysztof Kozlowski
2019-04-01 11:52 ` [U-Boot] [RFC 5/6] arm: exynos: odroid: fix the confict scripaddr extra env setting Anand Moon
2019-04-01 13:00 ` Krzysztof Kozlowski
2019-04-01 15:43 ` Anand Moon
2019-04-01 11:52 ` [U-Boot] [RFC 6/6] arm: exynos: add usbnet_devaddr setting to env Anand Moon
2019-04-01 13:04 ` Krzysztof Kozlowski
2019-04-01 16:42 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190401115232.453-5-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox